Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Cobalt vs Bi-metal Hole Saw: Which One Should You Buy?

The BULLITT M42 cobalt 3-piece set and the Bosch HSBIM9 9-piece bi-metal kit compared on tooth material, sizes, shank and box contents, using only what each listing states.

Cobalt vs Bi-metal Hole Saw: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 13PCS M42 Cobalt Impact Hole Saw Kit3PCS M42 Cobalt Impact Hole Saw Kit9.6/10View on Amazon
  2. 2BOSCH HSBIM9 9-Piece Bi-Metal Hole Saws AssortedBOSCH HSBIM9 9-Piece Bi-Metal Hole Saws Assorted9.6/10View on Amazon

Verdict. Pick the BULLITT M42 cobalt set for thin metal with an impact driver: variable tooth pitch, a spring ejector and an impact-rated hex shank. Pick the Bosch HSBIM9 for general-purpose work across wood, aluminum, metal and plastic, with six saws, two arbors and a case.

Cobalt vs bi-metal hole saw is a matchup where the two sides overlap more than the names suggest: both picks here state 8% cobalt. This comparison puts the BULLITT M42 cobalt 3-piece set against the Bosch HSBIM9 9-piece bi-metal kit on what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The two saws

3PCS M42 Cobalt Impact Hole Saw Kit

3PCS M42 Cobalt Impact Hole Saw Kit

BULLITT9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-piece M42 cobalt hole saw set in 25/32, 1 and 1-1/4 in, with 6-10 variable tooth pitch, a spring ejector and a universal hex shank for impact drills. It includes an Allen wrench and a shockproof tin storage box with EVA foam lining, and the set weighs 0.2 kg.

Pros

  • M42 high-speed steel with 8% cobalt
  • 6-10 variable tooth pitch for smooth cuts
  • Spring ejector clears scraps automatically
  • Universal hex shank fits impact drills

Cons

  • Rated for thin sheets to 1.6mm only
  • 3 saws, the smaller kit here
  • No warranty term is stated
BOSCH HSBIM9 9-Piece Bi-Metal Hole Saws Assorted

BOSCH HSBIM9 9-Piece Bi-Metal Hole Saws Assorted

Bosch9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9-piece bi-metal hole saw kit with six saws from 3/4 to 2 in, two SpinLOCK universal arbors, a pilot bit and a carrying case. The kit includes two SpinLOCK arbors, a steel pilot bit and a plastic carrying case, and weighs 2.2 pounds.

Pros

  • Six saws from 3/4 to 2 in
  • Two SpinLOCK universal arbors with tool-free changes
  • Progressor tooth design for wood, metal and plastic
  • 8% cobalt alloy with reinforced shoulders

Cons

  • Not impact-rated like the BULLITT
  • No variable pitch is stated
  • No warranty term is stated
  • 2.2 lb kit, heavier to carry

Other welders and gear to compare

Side by side

BULLITT M42 Cobalt Bosch HSBIM9 Notes
Tooth material M42 cobalt, 8% cobalt Bi-metal, 8% cobalt alloy Both state 8% cobalt
Sizes 25/32, 1, 1-1/4 in 3/4, 7/8, 1-1/8, 1-1/2, 1-3/4, 2 in Bosch covers more sizes
Tooth pitch 6-10 variable Progressor design Both cut metal
Rated for Thin sheets to 1.6mm Wood, aluminum, metal, plastic Match the material
Shank Universal hex, impact drills SpinLOCK universal arbor Check fit with your drill
In the box 3 saws, Allen wrench, tin box 6 saws, 2 arbors, pilot bit, case Bosch kit is fuller
Warranty Not stated Not stated None stated

All specs here repeat what the maker rates and the listing prints, copied down 22 October 2026. Neither listing states a warranty term.

Cobalt vs bi-metal hole saw: what actually differs

The names promise a material showdown, but both listings state 8% cobalt: the BULLITT as M42 high-speed steel with 8% cobalt, the Bosch as a bi-metal alloy with 8% cobalt. The real differences are elsewhere. The BULLITT is impact-rated with a 6-10 variable tooth pitch and a spring ejector, aimed at thin metal sheets. The Bosch is a general-purpose kit with a progressor tooth design, two arbors and a case, aimed at wood, aluminum, metal and plastic.

Sizes and what they cut

The BULLITT set covers three sizes, 25/32, 1 and 1-1/4 in, and is designed to drill thin sheets up to 1.6mm: mild steel, stainless steel, aluminum, PVC and plastic panels. The Bosch kit covers six sizes from 3/4 to 2 in for general-purpose work in wood, aluminum, metal and plastic. For a single thin-metal job, three sizes may be enough; for a shop that cuts everything, the wider range wins.

Six saws against three: the Bosch spans 3/4 in to 2 in, while the BULLITT covers 25/32 in, 1 in and 1-1/4 in. More sizes mean fewer trips to the store, but if your work lives at 1 in and under on thin metal, the BULLITT’s three cover it.

Shank and arbors

The BULLITT uses a universal hex shank that fits most corded and cordless impact drills, which suits the impact-rated design. The Bosch uses its SpinLOCK universal arbor, which fits all brands and sizes of hole saw bits and promises fast plug removal and tool-free installation, with two arbors in the box. Check your drill’s chuck or hex collet before assuming either fits.

Choose the BULLITT M42 Cobalt if

  • You cut thin metal sheets with an impact driver.
  • You want a variable tooth pitch and automatic scrap ejection.
  • Three sizes cover the holes you drill.
  • A tin box with EVA lining suits your tool bag.

Choose the Bosch HSBIM9 if

  • You cut wood, aluminum, metal and plastic, not just metal.
  • You want six sizes from 3/4 to 2 in in one kit.
  • Two arbors and a pilot bit in the box matter to you.
  • You prefer a carrying case over a tin box.

Depth of cut and material limits

Match the saw to the thickness you cut most. The BULLITT is built for thin metal sheets up to 1.6mm: mild steel, stainless steel, aluminum, PVC and plastic panels, driven by impact drills. Its 6-10 variable tooth pitch keeps the cut smooth and the spring ejector clears scraps without prying. The Bosch is the broader play: six saws from 3/4 in to 2 in with a progressor tooth design and reinforced shoulders, aimed at wood, aluminum, metal and plastic. Neither listing states a cutting depth, so judge by the use each one claims: thin sheet work favors the BULLITT, mixed-material work favors the Bosch.

Arbors, ejectors and what saves time

The Bosch kit brings two SpinLOCK universal arbors that fit all brands and sizes of hole saws, with tool-free installation and fast plug removal, plus a steel pilot bit for starting holes. The BULLITT brings one universal hex shank, impact-rated for corded and cordless impact drills, and relies on its built-in spring ejector to push out cut scraps during continuous drilling. If you swap diameters often, the SpinLOCK system and two arbors are the time saver. If you drill thin metal all day on an impact driver, the ejector and impact rating matter more.

FAQ for welders

Is a cobalt hole saw better than a bi-metal one?

Here the difference is smaller than the names suggest, since both state 8% cobalt. The BULLITT adds impact rating, variable pitch and a spring ejector for thin metal; the Bosch adds more sizes and arbors for general work. Pick by the job, not the label.

Can I use these hole saws in an impact driver?

The BULLITT listing states a universal hex shank for impact drills and calls the set impact-rated. The Bosch listing states a SpinLOCK arbor for drills generally, without mentioning impact drivers.

What thickness can the BULLITT cut?

The listing says it is designed to drill thin sheets up to 1.6mm. For thicker stock, the listing gives no rating.

Does the Bosch kit include arbors?

Yes. The HSBIM9 includes two SpinLOCK universal arbors, a steel pilot bit and six hole saws in a plastic carrying case.

Do either of these have a warranty?

Neither listing states a warranty term, so both score zero on warranty.

Related: best hole saw for aluminum, step drill bit vs hole saw for sheet metal, best step drill bit for aluminum.

Scoring, line by line

Each saw is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Neither listing states a safety certification or a warranty term, so both score zero on those criteria; the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
BULLITT M42 Cobalt 9.6 32 21 20 n/a 0
Bosch HSBIM9 9.6 29 21 22 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

Before you strike an arc. Clamp the work before you cut, wear eye protection, and keep the cord clear of the spinning saw on a corded drill. Let a hot saw cool before handling it, and disconnect power before changing bits or arbors: unplug a corded drill, remove the battery from a cordless one. See the OSHA welding overview.

More buying guides