Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Hole Saw for Metal (2026): 5 Kits Compared

Five hole saw kits for metal, compared on tooth material, size range, cutting depth and kit contents, scored from what each listing states.

Best Hole Saw for Metal (2026): 5 Kits Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ASNOMY 12 pc TCT KitHardest Metal PickASNOMY 12 pc TCT Kit9.6/10View on Amazon
  2. 2GSTK 14 pc Carbide KitBest Chip ClearingGSTK 14 pc Carbide Kit9.6/10View on Amazon
  3. 3Diablo Bi-Metal 10-Cup SetDeepest CutDiablo Bi-Metal 10-Cup Set9.6/10View on Amazon
  4. 4Milwaukee 28 pc KitBiggest KitMilwaukee 28 pc Kit9.6/10View on Amazon
  5. 5HYCHIKA 17 pc Bi-Metal KitBest Small KitHYCHIKA 17 pc Bi-Metal Kit9.5/10View on Amazon

A clean hole in a mounting bracket, a gauge pod in a dash panel, a conduit pass-through in an enclosure. The best hole saw for metal cuts round, stays sharp and clears its own chips. We compared five hole saw kits on what each listing states: saw count and size range, tooth material and design, cutting depth, and what ships in the box.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same.

Quick picks

  • Hardest Metal Pick ASNOMY 12 pc TCT Kit: TCT carbide, three-blade teeth, 25 mm cutting length for stainless and hard metal. Check price on Amazon
  • Best Chip Clearing GSTK 14 pc Carbide Kit: TCT carbide, double chip-removal circles; listing advises coolant and goggles. Check price on Amazon
  • Deepest Cut Diablo Bi-Metal 10-Cup Set: 2-3/8 in cutting depth, Snap-Lock Plus mandrel, tool-free plug ejection. Check price on Amazon
  • Biggest Kit Milwaukee 28 pc Kit: 28 pieces, ice-hardened Matrix II teeth, made in USA. Check price on Amazon
  • Best Small Kit HYCHIKA 17 pc Bi-Metal Kit: 17 pieces, 19 to 68 mm saws, 40 mm depth, storage box included. Check price on Amazon

The machines

12PCS Tungsten Carbide Hole Saw Kit for Hard Metal

12PCS Tungsten Carbide Hole Saw Kit for Hard Metal

ASNOMY9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

12-piece tungsten carbide hole saw kit with 10 saws, 16 to 54 mm, three-blade tooth design, 25 mm cutting length, aluminum box.

Pros

  • Tungsten carbide teeth stated for hard metal and stainless
  • Three-blade tooth design: outer, middle and inner blades
  • 25 mm cutting length stated
  • Titanium-plated pilot bits and aluminum box included

Cons

  • No warranty term stated
  • No safety certification stated
  • Not for concrete, tile or stone per the listing
  • 10 saws is fewer than the big kits
GSTK Upgrade Heavy Duty Carbide Hole Saw 14

GSTK Upgrade Heavy Duty Carbide Hole Saw 14

GSTK9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

14-piece tungsten carbide hole saw kit, 14 to 54 mm, double chip-removal circles, with pilot drills and L-wrenches.

Pros

  • Tungsten carbide teeth for stainless and metal
  • Double round circles stated for chip removal and cooling
  • 12 saw sizes from 14 to 54 mm
  • Listing advises coolant, goggles and gloves for safety

Cons

  • No warranty term stated
  • No safety certification stated
  • No cutting depth stated
  • Listing prose is rough with odd phrasing
Diablo Bi-Metal Hole Saw Set

Diablo Bi-Metal Hole Saw Set

Diablo9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Bi-metal hole saw set, 10 cups from 7/8 to 2-9/16 in, 2-3/8 in cutting depth, Snap-Lock Plus mandrel system.

Pros

  • Deepest stated cutting depth here: 2-3/8 in
  • Snap-Lock Plus mandrel for quick changes
  • Tool-free plug ejection stated
  • Variable tooth design for faster cuts with less vibration

Cons

  • No warranty term stated beyond the word Warranty
  • No safety certification stated
  • Bi-metal, not carbide, for hard metal
  • Mandrel fits Diablo sizes 5/8 to 6 in only
Milwaukee 49-22-4185 All Purpose Professional Ice

Milwaukee 49-22-4185 All Purpose Professional Ice

Milwaukee9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

28-piece all-purpose hole saw kit, ice-hardened Matrix II bi-metal teeth, made in the USA.

Pros

  • 28 pieces, the biggest kit here
  • Ice-hardened teeth stated for up to 50 percent longer life
  • Matrix II bi-metal teeth for durability
  • Made in the United States

Cons

  • Thinnest listing: no sizes or depth stated
  • No warranty term stated
  • No safety certification stated
  • Positive rake and gullets claimed with no figures
Bi-Metal Hole Saw Kit, HYCHIKA 17 Pcs High Speed

Bi-Metal Hole Saw Kit, HYCHIKA 17 Pcs High Speed

HYCHIKA BETTER TOOLS FOR BETTER LIFE9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

17-piece bi-metal hole saw kit, 11 saws from 19 to 68 mm, 40 mm max cutting depth, storage box included.

Pros

  • 11 saws from 19 to 68 mm, the widest range here
  • 40 mm max cutting depth stated
  • 2 mandrels, 3 drill bits, hex key and box included
  • Chip removal groove stated on the saw side

Cons

  • Aimed at soft metal; not the hard-metal pick
  • 69-81HRC hardness claim is oddly stated
  • No warranty term stated
  • No safety certification stated

Spec sheet comparison

Kit Saws Size range Cutting depth Tooth
ASNOMY 12 pc TCT Kit 10 16-54 mm 25 mm Tungsten carbide, 3-blade
GSTK 14 pc Carbide Kit 12 14-54 mm Not stated Tungsten carbide
Diablo Bi-Metal 10-Cup Set 10 7/8-2-9/16 in 2-3/8 in Bi-metal, variable tooth
Milwaukee 28 pc Kit 28 pc kit Not stated Not stated Bi-metal Matrix II
HYCHIKA 17 pc Bi-Metal Kit 11 19-68 mm 40 mm Bi-metal HSS

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 20 October 2026. Where a listing contradicts itself, both figures are shown.

How to choose the best hole saw for metal

Carbide or bi-metal

Two kits here are tungsten carbide tipped: the ASNOMY and GSTK, both stated for hard metal and stainless steel. The HYCHIKA, Diablo and Milwaukee are bi-metal, which suits general metal work. For stainless plate, the carbide listings state the advantage plainly; for mild steel and occasional holes, bi-metal does the job.

Size range and cutting depth

The HYCHIKA runs 19 to 68 mm with a stated 40 mm max cutting depth; the ASNOMY runs 16 to 54 mm with a 25 mm cutting length; the Diablo runs 7/8 to 2-9/16 in with a 2-3/8 in cutting depth, the deepest here. Match the depth to your stock: a deep cup drills thicker plate in one pass. The Milwaukee and GSTK state no cutting depth, so treat theirs as unknown.

Tooth design and chip clearing

The ASNOMY lists a three-blade tooth design with outer, middle and inner blades for hard metals. The GSTK lists double round circles to remove metal filings and aid cooling. The Diablo lists a variable tooth design for faster cuts with less vibration and tool-free plug ejection. The Milwaukee lists deeper gullets for chip removal and a radiused tooth back to reduce stress on the teeth. A saw that clears chips cuts cooler and longer.

What ships in the box

Count the kit, not just the saws. The HYCHIKA ships 11 saws plus 2 mandrels, 3 drill bits, a hex key and a storage box. The ASNOMY ships 10 saws, 2 titanium-plated pilot bits and 2 hex wrenches in an aluminum box. The GSTK ships 12 saws, 2 pilot drills and 2 L-wrenches. The Diablo ships 10 cups with its Snap-Lock Plus mandrel system for quick changes. The Milwaukee is a 28-piece kit with the thinnest listing. For more fab tooling, see our best tubing notcher.

Buying guide: what matters in a home shop

Pilot bits and arbors

The pilot bit does the steering, so count what ships. The HYCHIKA ships 2 mandrels and 3 drill bits; the ASNOMY ships 2 titanium-plated M2 pilot drill bits; the GSTK ships 2 pilot center drills and 2 L-wrenches; the Diablo ships its Snap-Lock Plus mandrel with a pilot bit and 2 adaptor nuts. The Milwaukee lists no mandrel or pilot detail. A spare pilot bit matters because pilots wear faster than the saw cup.

Kit count and what it covers

Piece counts here run from 12 to 28, but the number only helps if the sizes are stated. The HYCHIKA’s 17 pieces cover 11 saws from 19 to 68 mm; the GSTK’s 14 pieces cover 12 saws from 14 to 54 mm; the ASNOMY’s 12 pieces cover 10 saws from 16 to 54 mm; the Diablo’s set covers 10 cups from 7/8 to 2-9/16 in; the Milwaukee’s 28 pieces have no stated sizes. Judge a kit by its size range, not its piece count.

When to step up to carbide

Bi-metal saws, like the HYCHIKA, Diablo and Milwaukee here, handle mild steel and occasional holes well. When the work is stainless plate, hard metal or cast iron, the listings point to carbide: the ASNOMY states its tungsten carbide teeth for hard metal and stainless steel plate, and the GSTK states its TCT carbide for stainless steel, iron and alloy steel. The stated application ceiling is higher.

Cooling and chip flow

Heat kills teeth faster than hard metal does. The GSTK listing advises coolant during continuous high-speed drilling. The HYCHIKA lists a chip removal groove on the saw side; the Milwaukee lists deeper gullets for fast chip removal; the GSTK lists double round circles to remove metal filings and aid cooling. On deep cuts, back the saw out often and let the gullets clear.

Before You Strike an Arc

  • Clamp the work before drilling; a caught saw spins the piece, not the drill.
  • The GSTK listing advises coolant during continuous high-speed drilling plus goggles and gloves.
  • Start the pilot bit before the saw teeth touch the metal.
  • Clear chips often on deep cuts; packed gullets overheat the teeth.

FAQ for welders

Can I use a hole saw on stainless steel?

Yes, with the right teeth. The ASNOMY and GSTK listings state their carbide teeth for stainless steel and hard metal. Bi-metal saws cut stainless too, but slower and with more wear.

What is the difference between TCT and bi-metal hole saws?

TCT means tungsten carbide tipped cutters, stated on the ASNOMY and GSTK for hard metal. Bi-metal, on the HYCHIKA, Diablo and Milwaukee, pairs high-speed steel teeth with a flexible body for general metal work.

How deep can these hole saws cut?

The Diablo states 2-3/8 in, the HYCHIKA 40 mm and the ASNOMY a 25 mm cutting length. The Milwaukee and GSTK state no cutting depth.

Do I need cutting oil?

The GSTK listing advises coolant during continuous high-speed drilling. For occasional holes in thin stock, the listings here do not require it, but cooling extends tooth life on every saw here.

What size mandrel do I need?

The HYCHIKA ships 2 mandrels, the ASNOMY’s pilots are titanium-plated M2 steel, and the Diablo uses its Snap-Lock Plus mandrel system. Match the mandrel to the saw cup and your drill’s chuck.

Can these kits cut wood and plastic too?

Yes, within the listings. The HYCHIKA states wood, PVC board, plastic and gypsum board; the ASNOMY states wood and plastic; the Diablo states hardwoods, softwoods and plastics. The ASNOMY explicitly excludes concrete, tile and stone.

Also see our tubing notcher vs hole saw jig. Also see our best metal chop saw for home shop. Also see our best chop saw for metal cutting.

Scoring, line by line

Each kit is scored on performance, build, value, safety and warranty, with the weights published on the site’s How We Pick page. None of the five states a safety certification, so safety is zero across the board, and none states a warranty term, so the ranking comes from performance, build and value: tooth material, size range and kit contents.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
ASNOMY 12 pc TCT Kit 9.6 30 21 21 n/a 0
GSTK 14 pc Carbide Kit 9.6 29 20 21 n/a 0
Diablo Bi-Metal 10-Cup Set 9.6 29 20 20 n/a 0
Milwaukee 28 pc Kit 9.6 28 20 20 n/a 0
HYCHIKA 17 pc Bi-Metal Kit 9.5 27 20 20 n/a 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides