Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Hole Saw for Aluminum (2026)

Five carbide hole saws for aluminum: three multi-size kits and two single saws, compared by cutting range, tooth design, pilot bits and cooling advice.

Best Hole Saw for Aluminum (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1METOTY 19-Pc KitBest OverallMETOTY 19-Pc Kit9.5/10View on Amazon
  2. 2dashap 13-Pc KitThick Metaldashap 13-Pc Kit9.5/10View on Amazon
  3. 3Highfire 20-Pc KitKit with CaseHighfire 20-Pc Kit9.5/10View on Amazon
  4. 4Rannb 1.5in SingleSingle SizeRannb 1.5in Single9.5/10View on Amazon
  5. 5AUTOTOOLHOME 2inSingle Saw PickAUTOTOOLHOME 2in9.4/10View on Amazon

Aluminum cuts easily but galls and grabs, so the best hole saw for aluminum in these listings is a carbide-tipped saw, with the Rannb listing advising low RPM with cutting oil. This guide compares five carbide hole saws and kits by cutting range, tooth design, pilot bits, cooling advice and pack size.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same.

Quick picks

  • Best Overall METOTY 19-Pc Kit: 19 pieces, 13 saws from 1/2 in to 2-1/8 in, titanium pilots and coolant guidance. Check price on Amazon
  • Thick Metal dashap 13-Pc Kit: 12 saws to 2-1/8 in, cuts metal up to 28 mm thick, punch locator included. Check price on Amazon
  • Kit with Case Highfire 20-Pc Kit: 20 pieces with hard case, three-blade TCT teeth, 1/2 in to 2-1/8 in. Check price on Amazon
  • Single Size Rannb 1.5in Single: 1.5 in carbide saw with 2 split-point pilots and triangle shank. Check price on Amazon
  • Single Saw Pick AUTOTOOLHOME 2in: 2 in TCT saw with pilot bit, 7.68 oz for one repeated size. Check price on Amazon

The machines

19 PCS (1/2" to 2-1/8") Carbide Hole Saw Kit

19 PCS (1/2" to 2-1/8") Carbide Hole Saw Kit

METOTY9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 19-piece carbide hole saw kit with 13 saws from 1/2 in to 2-1/8 in, 3 titanium pilots and 3 L-wrenches.

Pros

  • 13 saws, 1/2 in to 2-1/8 in
  • Titanium-plated carbide teeth
  • 3 pilots and 3 L-wrenches
  • Coolant and goggles guidance

Cons

  • Not for tile, glass or concrete
  • 2.43 kg, the heaviest kit
  • No warranty term stated
  • 19 pieces to keep track of
13PCS Carbide Hole Saw Kit for Metal

13PCS Carbide Hole Saw Kit for Metal

dashap9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-piece carbide hole saw kit from 33/64 in to 2-1/8 in with 5 drill bits, hex keys and a punch locator.

Pros

  • 12 saws, 33/64 in to 2-1/8 in
  • Cuts metal up to 28 mm thick
  • Punch locator included
  • 24-hour after-sales service

Cons

  • 13 pieces vs 19 in the METOTY
  • No warranty term stated
  • Service is support, not a warranty
  • No case stated
HIGHFIRE 20pcs Carbide Hole Saw Kit with Case

HIGHFIRE 20pcs Carbide Hole Saw Kit with Case

Highfire9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20-piece carbide hole saw kit with case, 13 saws from 1/2 in to 2-1/8 in and a three-blade TCT tooth design.

Pros

  • 13 saws, 1/2 in to 2-1/8 in
  • Hard case included
  • Three-blade TCT teeth
  • 24-hour after-sales service

Cons

  • No warranty term stated
  • 2.32 kg kit
  • Springs are easy to lose
  • No max thickness stated
Hole Saw 1.5-inch/38mm Metal Hole Saw Carbide

Hole Saw 1.5-inch/38mm Metal Hole Saw Carbide

Rannb9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1.5 in carbide-tipped hole saw kit with 2 pilot drill bits, an L-wrench and a 10mm triangle shank.

Pros

  • Complete kit: saw, 2 pilots, wrench
  • Split-point pilot prevents walking
  • Triangle shank resists slipping
  • Low RPM and cutting oil guidance

Cons

  • Single 1.5 in size only
  • No warranty term stated
  • One size, one job
  • No case
2 Inch TCT Hole Saw for Metal

2 Inch TCT Hole Saw for Metal

AUTOTOOLHOME9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2 in TCT hole saw with tungsten carbide teeth and a pilot drill bit for steel, stainless, aluminum and plastic.

Pros

  • 2 in clean cut
  • Tungsten carbide teeth
  • Pilot bit included
  • 7.68 oz, light

Cons

  • Single size only
  • Fewest extras here
  • No warranty term stated
  • No case

Spec sheet comparison

Model Shop Score Cutting range Teeth Pilot bits Pack Warranty
METOTY 19-Pc Kit 9.5/10 1/2 in to 2-1/8 in Titanium-plated carbide 3 titanium 19 pieces Not stated
dashap 13-Pc Kit 9.5/10 33/64 in to 2-1/8 in Carbide tips 5 drill bits 13 pieces Not stated
Highfire 20-Pc Kit 9.5/10 1/2 in to 2-1/8 in TCT three-blade 2 drill bits 20 pieces, case Not stated
Rannb 1.5in Single 9.5/10 1.5 in Tungsten carbide 2 split-point 4 pieces Not stated
AUTOTOOLHOME 2in 9.4/10 2 in Tungsten carbide 1 pilot Saw plus pilot Not stated

All specs here repeat what the maker rates and the listing prints, copied down 21 October 2026.

Buying guide: the best hole saw for aluminum

Carbide teeth for aluminum

All five use carbide teeth: the Rannb and AUTOTOOLHOME use tungsten carbide tipped teeth, the METOTY uses titanium-plated cemented carbide, the dashap uses carbide tips and the Highfire uses TCT with a three-blade design. The Rannb listing advises low RPM and cutting oil for maximum lifespan; the METOTY and Highfire advise adding coolant during continuous high-speed drilling.

Size range: single saws vs kits

The Rannb cuts a single 1.5 in hole (38mm) and the AUTOTOOLHOME a single 2 in hole (50mm). The kits cover 1/2 in to 2-1/8 in: the METOTY with 13 saws, the dashap with 12 saws from 33/64 in to 2-1/8 in, and the Highfire with 13 saws in the same 1/2 to 2-1/8 in spread. Buy the single when you cut one size; buy the kit when sizes vary. The dashap listing states its saws cut metal up to 28 mm thick.

Pilot bits and anti-walk

Every pick includes pilot bits: the Rannb ships 2 pilot drill bits plus an L-wrench, the AUTOTOOLHOME includes a pilot bit, the METOTY includes 3 titanium-plated pilots and 3 L-wrenches, the dashap includes 5 drill bits, 2 hex keys and a punch locator, and the Highfire includes 2 drill bits, 2 hex keys and 3 springs. The Rannb’s split-point pilot engages first to prevent walking, and its 10mm (3/8 in) triangle shank resists slipping in the chuck.

Cooling and safety

Aluminum builds heat fast. The Rannb advises low RPM with cutting oil; the METOTY and Highfire advise coolant and protective goggles and gloves. The dashap adds a double-circle design for chip removal and cooling. Run slow, add lubricant and clear chips often; a hot saw welds aluminum to its teeth.

[wgl_safety kind=”tool”]

FAQ for welders

Can I use a carbide hole saw on aluminum?

Yes: all five listings name aluminum among their materials. Run at low RPM with cutting oil or coolant for clean holes.

What size hole saw kit do I need?

The METOTY, dashap and Highfire kits all span roughly 1/2 in to 2-1/8 in. Singles like the Rannb 1.5 in and AUTOTOOLHOME 2 in suit one repeated size.

Do hole saws need pilot bits?

Yes: every pick here ships pilot bits, and the Rannb’s split-point pilot prevents walking on the mark.

Do any of these have a warranty?

None of the five listings states a warranty term.

Related: our TIG vs MIG for aluminum comparison.

Scoring, line by line

Each saw is scored on performance, build, value, safety and warranty, using only what the listing publishes. Kits score highest on range and extras; singles score on the completeness of their kit. None of the five listings states a warranty term, so no warranty is counted for any of them.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
METOTY 19-Pc Kit 9.5 28 19 20 n/a 0
dashap 13-Pc Kit 9.5 28 19 20 n/a 0
Highfire 20-Pc Kit 9.5 27 19 20 n/a 0
Rannb 1.5in Single 9.5 27 19 19 n/a 0
AUTOTOOLHOME 2in 9.4 26 18 19 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides

Metal Fab Tools ·

Best Hole Saw Under $30 (2026)

Three hole saws compared by size range, stated materials and kit contents, from a 4-inch bi-metal saw with arbor to a 25-piece carbon steel…