Best Hole Saw Under $30 (2026)
Three hole saws compared by size range, stated materials and kit contents, from a 4-inch bi-metal saw with arbor to a 25-piece carbon steel set.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Biggest setKATA 25-Piece Kit9.6/10View on Amazon - 2
Bi-metal pickVIKITON 4-Inch9.6/10View on Amazon - 3
Larger bi-metalVIKITON 4-1/2-Inch9.6/10View on Amazon
A cable gland needs a clean round hole in the panel, or a pipe needs to pass through a cabinet wall. The best hole saw under 30 is the one whose size range and stated materials match the stock you cut: the three listings here run from single bi-metal saws with arbors to a 25-piece carbon steel set. Listings were collected 20 October 2026.
The listings state what each saw is built for: bi-metal with high-speed steel teeth for thin metals, or carbon steel for wood, drywall and plastic. The rest of this guide walks through the stated specs before you buy.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Biggest set KATA 25-Piece Kit: 17 saws from 3/4 to 6 inches with mandrels, bits and a case. Check price on Amazon
- Bi-metal pick VIKITON 4-Inch: 4-inch bi-metal saw with arbor kit for thin metals. Check price on Amazon
- Larger bi-metal VIKITON 4-1/2-Inch: 4-1/2-inch bi-metal saw with arbor kit for thin metals. Check price on Amazon
The machines
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | KATA 25 Piece Hole Saw Kit with 3/4"-6" for Wood | 9.6/10 | Buy on Amazon |
| 2 | 4 inch Hole Saw for Wood, Metal | 9.6/10 | Buy on Amazon |
| 3 | 4-1/2 inch Hole Saw for Wood, Metal | 9.6/10 | Buy on Amazon |

KATA 25 Piece Hole Saw Kit with 3/4"-6" for Wood
25-piece carbon steel hole saw set stated with 17 saws from 3/4 inch to 6 inches, drill bits, mandrels, a hex key, a 19 to 22mm wrench, an installation plate and a heavy duty case, stated at 3.1 pounds with part number KTL89020.
Pros
- 17 saws from 3/4 inch to 6 inches stated: 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-3/4, 2, 2-1/8, 2-1/4, 2-1/2, 3, 3-1/2, 4, 5 and 6 inches
- Drill bits, mandrels, hex key, 19 to 22mm wrench and installation plate stated in the box
- Heavy duty case with designated slots for each blade stated for storage and carry
- Heat-treated carbon steel blades with black coating stated for recessed lights, speaker openings and pipe access
Cons
- Not for thick metal, tile, concrete or stone stated in the listing
- Not for cutting depths beyond about 1 inch (25mm) stated
- Limited warranty stated with no concrete term such as years or months
- Carbon steel stated, not bi-metal, so thin metal work is not stated

4 inch Hole Saw for Wood, Metal
4-inch bi-metal hole saw stated with high-speed steel teeth and a flexible steel body, an arbor with a drill bit, a replacement pilot bit and a hex key, stated for wood, plastic, drywall and thin metals with part number VKTBY117B in orange.
Pros
- Bi-metal build with high-speed steel teeth and a flexible steel body stated
- Wood, plastic, drywall and thin metals stated, with stainless steel excluded
- Arbor with a drill bit, a replacement pilot bit and a hex key stated in the package
- 102mm hole saw stated at 4 by 4 inches for drills
Cons
- No warranty stated anywhere in the listing
- Stainless steel excluded from the stated materials
- Single 4-inch size stated, no other sizes in the package
- No weight figure stated in the listing

4-1/2 inch Hole Saw for Wood, Metal
4-1/2-inch bi-metal hole saw stated with high-speed steel teeth and a flexible steel body, an arbor, a replacement drill bit and a hex key, stated for wood, plastic, drywall and thin metals at 0.63 kg with part number VKTBY153 in orange.
Pros
- Bi-metal build with high-speed steel teeth and a flexible steel body stated
- Wood, plastic, drywall and thin metals stated, with stainless steel excluded
- Arbor, replacement drill bit and hex key stated in the package
- 114mm hole saw stated at 0.63 kg for a drill machine
Cons
- No warranty stated anywhere in the listing
- Stainless steel excluded from the stated materials
- Single 4-1/2-inch size stated, no other sizes in the package
- No cutting depth figure stated in the listing
Other welders and gear to compare
6 inch Hole Saw for WoodCheck price on Amazon
3 inch Hole Saw for WoodCheck price on Amazon
2 inch Hole Saw for WoodCheck price on Amazon
6.25" Hole Saw for Recessed LightsCheck price on Amazon
5 inch Hole Saw for WoodCheck price on Amazon
Spec sheet comparison
| Hole saw | Type | Sizes | Materials stated |
|---|---|---|---|
| KATA 25-Piece Kit | 25-pc set | 3/4-6 in | Wood, drywall, PVC |
| VIKITON 4-Inch | Single, bi-metal | 4 in | Wood, thin metals |
| VIKITON 4-1/2-Inch | Single, bi-metal | 4.5 in | Wood, thin metals |
Ratings in this table are the makers’ own claims taken from each product page (20 October 2026). “Not stated” means the listing does not give the figure.
What the listings tell you
We read three hole saw listings. Stated builds: bi-metal with high-speed steel teeth on the two VIKITON saws, heat-treated carbon steel on the KATA 25-piece set. Stated size ranges: 4 inches and 4-1/2 inches on the VIKITON singles, 3/4 to 6 inches on the KATA 25-piece. Stated materials: wood, plastic, drywall and thin metals (not stainless) on the VIKITON pair; wood, drywall, PVC and plastic on the KATA 25-piece set, which states it is not for thick metal, tile, concrete or stone.
On weight and size, the KATA 25-piece states 3.1 pounds and 9.4 by 9.05 inches, the VIKITON 4-1/2-inch states 0.63 kg and the VIKITON 4-inch states 4 by 4 inches with no weight stated. Stated part numbers: VKTBY117B on the VIKITON 4-inch, VKTBY153 on the VIKITON 4-1/2-inch, KTL89020 on the KATA 25-piece. Stated colors: orange on the VIKITON pair, black on the KATA 25-piece set. The VIKITON pair states drills as compatible devices; the KATA 25-piece states corded, cordless and rotary drills.
Buying guide: choosing the best hole saw under 30
Bi-metal singles vs carbon steel set
The two VIKITON saws state bi-metal construction with high-speed steel teeth and a flexible steel body, stated for wood, plastic, drywall and thin metals with stainless steel excluded. The KATA 25-piece states heat-treated carbon steel for wood, drywall, PVC and plastic, and states it is not for thick metal, tile, concrete or stone. If the job includes thin metal, the VIKITON pair states it; if the job is wood and drywall only, the carbon steel set states enough.
Size range
The KATA 25-piece states the widest range: 17 saws from 3/4 inch to 6 inches. The VIKITON singles state 4 inches (102mm) and 4-1/2 inches (114mm). For one-off holes, a single saw states enough; for a shop that cuts many sizes, the stated set range is the reason to buy the set.
What is in the box
The VIKITON singles each state a 1-piece saw, an arbor with a drill bit, a replacement pilot drill bit and a hex key. The KATA 25-piece states drill bits, mandrels, a hex key, a 19 to 22mm wrench, an installation plate and a heavy duty case.
Cutting depth
The KATA 25-piece listing states a cutting depth limit: not for cutting depths beyond about 1 inch (25mm). The other two state no cutting depth figure. For through-holes in thin stock, the stated 1 inch covers it; the VIKITON listings state no cutting depth figure.
Stated drill compatibility
The VIKITON pair states drills and drill machines as compatible devices. The KATA 25-piece states corded drills, cordless drills, rotary drills and most standard electric drills. For the stated uses, a standard corded or cordless drill is what the listings name.
Usage tips the listings state
The VIKITON listings state pro tips: not for brittle materials such as glass, ceramic, tile, granite, marble, porcelain, brick, masonry or natural stone; allow the hole saw to cool before touching; apply water or coolant and reduce feed speed when drilling metals; stop immediately if abnormal vibration occurs. The KATA 25-piece listing states choosing the correct saw size, keeping the drill straight and avoiding excessive pressure, with chips cleared often.
Warranty statements
The KATA 25-piece listing states a limited warranty that does not cover misuse, abuse, normal wear such as worn teeth, or accidental damage, with no concrete term given. The other two state no warranty at all. None of the three scores on warranty: a concrete term such as years, months or days is required for that.
Which sizes do you actually need
The VIKITON singles state one size each: 4 inches and 4-1/2 inches. The set states a range: the KATA 25-piece states 3/4 inch to 6 inches. Match the stated range to the holes on your cut list: buying a set for one hole size wastes money, and buying a single saw for many sizes wastes trips to the store.
Hole saws throw chips and can grab the work. Clamp the stock, wear eye protection, keep hands clear of the cut, and let the saw cool before touching it: the VIKITON listings state the surface runs hot after drilling. Disconnect power before changing bits or arbors.
FAQ for welders
Which hole saw states thin metals?
The two VIKITON saws state wood, plastic, drywall and thin metals, with stainless steel excluded. The carbon steel set states it is not for thick metal.
What size range does the set cover?
The KATA 25-piece states 3/4 inch to 6 inches.
What is the stated cutting depth?
The KATA 25-piece listing states not for cutting depths beyond about 1 inch (25mm). The other two state no cutting depth figure.
Do any state a warranty?
The KATA 25-piece listing states a limited warranty with no term given, so none of the three scores on warranty. The other two state no warranty at all.
Which include an arbor?
All three state one. The VIKITON singles state an arbor with a drill bit plus a replacement bit and hex key. The KATA 25-piece states mandrels, drill bits and a hex key.
What do the listings say about brittle materials?
The VIKITON listings state they are not recommended for brittle materials such as glass, ceramic, tile, granite, marble, porcelain, brick, masonry or natural stone, saying those materials can chip easily and will quickly dull the saw teeth. The KATA 25-piece listing states it is not intended for thick metal, tile, concrete or stone.
Scoring, line by line
Each hole saw is scored on performance, build, value, safety and warranty. None of the three listings states a safety certification or a warranty term, so every saw scores zero on safety and on warranty, which leaves the ranking to be decided by stated size range, materials and kit contents.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| KATA 25-Piece Kit | 9.6 | 30 | 21 | 21 | n/a | 0 |
| VIKITON 4-Inch | 9.6 | 28 | 21 | 19 | n/a | 0 |
| VIKITON 4-1/2-Inch | 9.6 | 28 | 21 | 19 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.
More welding guides
Also see our best hole saw for metal and tubing notcher vs hole saw jig.




