Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Hole Saw Arbor (2026): 5 Picks for the Shop

Five hole saw arbors for the shop, compared on shank size, hole saw fit range, quick change, pilot bits and warranty.

Best Hole Saw Arbor (2026): 5 Picks for the Shop
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Lenox 6LBest OverallLenox 6L9.7/10View on Amazon
  2. 2JTemgle Heavy DutyWidest Fit RangeJTemgle Heavy Duty9.6/10View on Amazon
  3. 3Milwaukee 49-56-9100Best Quick ChangeMilwaukee 49-56-91009.6/10View on Amazon
  4. 4JIECHENG 4-PieceMost Pilot BitsJIECHENG 4-Piece9.5/10View on Amazon

A hole saw only cuts a clean round hole when the arbor holds it true. Wobble opens the hole up, a loose pilot bit walks across the panel, and a shank that slips in the chuck turns a quick job into a ruined panel. The best hole saw arbor keeps the saw centered, the pilot bit sharp and seated, and the shank locked in the chuck, so the cut lands where it was marked.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Lenox 6L: Hardened carbon steel, quick change, fits 1-1/4 to 6 inch hole saws, a 3-1/4 inch pilot bit and the only stated warranty here, limited lifetime. Check price on Amazon
  • Widest Fit Range JTemgle Heavy Duty: A 1/2 inch hex shank that fits 1-1/2 to 12 inch hole saws, with 5 center drill bits and a hex wrench in the box. Check price on Amazon
  • Best Quick Change Milwaukee 49-56-9100: Tool-free quick change with all brands of hole saws 1-1/4 inch and larger, hardened steel, and a 7/16 inch shank. Check price on Amazon
  • Most Pilot Bits JIECHENG 4-Piece: A 4-piece kit with two HSS pilot bits, a 3 inch standard and a 4 inch extended, for 1-1/4 to 10 inch bi-metal hole saws. Check price on Amazon

The machines

Lenox Tools 1779805 6L Quick Change Arbor

Lenox Tools 1779805 6L Quick Change Arbor

Lenox9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A hardened carbon steel quick-change arbor with a 3-1/4 inch pilot bit, made for 20L to 96L hole saws from 1-1/4 to 6 inches, with the only stated warranty here, limited lifetime.

Pros

  • Limited lifetime warranty, the only stated warranty term here
  • Quick-change design for fast saw swaps
  • Fits 20L to 96L hole saws from 1-1/4 to 6 inches
  • Includes a 3-1/4 inch pilot drill bit

Cons

  • Fit range ends at 6 inches, so larger hole saws need a different arbor
  • Only one pilot bit is listed, with no spare in the box
  • Shank fit is given as 3/8 inch or larger, rather than one shank size
  • No stated thread size for the saw mount
MILWAUKEE'S Hole Saw Arbor, 7/16 Shank

MILWAUKEE'S Hole Saw Arbor, 7/16 Shank

Milwaukee9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A hardened steel quick-change arbor with a 7/16 inch shank and 5/8-18 thread, made for hole saws 1-1/4 inch and larger and drill chucks 1/2 inch and larger.

Pros

  • Tool-free quick change with all brands of hole saws
  • Fits hole saws 1-1/4 inch and larger, with no stated upper limit
  • Fits drill chucks 1/2 inch and larger
  • Hardened steel construction with a no-wobble design

Cons

  • Needs a 1/2 inch or larger chuck, so smaller drills cannot hold it
  • No pilot bit is listed in the stated contents
  • No warranty term is stated
  • No hex wrench in the stated contents
Milwaukee Hole Dozer Carbide Teeth Large

Milwaukee Hole Dozer Carbide Teeth Large

Milwaukee9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A hardened steel large quick-change arbor with a 7/16 inch shank, made to hold the saw tight for reduced wobble and fast starts.

Pros

  • Tool-free quick-change design
  • Holds the hole saw tight for reduced wobble and accurate cuts
  • Pilot bit engages the material on contact for fast starts
  • Hardened steel construction

Cons

  • No hole saw fit range stated, so check compatibility before ordering
  • No warranty term is stated
  • No pilot bit size stated
  • No chuck size stated
JTemgle Heavy Duty Hole Saw Arbor with 5pcs Center

JTemgle Heavy Duty Hole Saw Arbor with 5pcs Center

JTemgle9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A carbon steel arbor with a 1/2 inch hex shank, 5 center drill bits and a hex wrench, made for hole saws from 1-1/2 to 12 inches.

Pros

  • Widest stated fit range here, 1-1/2 to 12 inch hole saws
  • 5 center drill bits in the box, the most here
  • 1/2 inch hex shank for a firm grip in the chuck
  • Hex wrench included

Cons

  • Fit starts at 1-1/2 inches, so smaller hole saws need a different arbor
  • No quick-change design stated
  • No pilot bit size stated
  • No extension in the box for deep reach
JIECHENG Bi-metal Hole Saw Arbor Mandrel 3/8" Hex

JIECHENG Bi-metal Hole Saw Arbor Mandrel 3/8" Hex

JIECHENG9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-piece kit with a 3/8 inch hex shank arbor and two HSS pilot bits, made for bi-metal hole saws from 1-1/4 to 10 inches.

Pros

  • Two HSS pilot bits: a 1/4 by 3 inch standard bit and a 1/4 by 4 inch extended bit
  • Fits bi-metal hole saws from 1-1/4 to 10 inches
  • 3/8 inch hex shank works with 3/8 or 1/2 inch chucks
  • Hex wrench included for assembly and maintenance

Cons

  • Fit is stated for bi-metal hole saws only
  • No quick-change design stated
  • Arbor body material is not stated, only the HSS pilot bits
  • No stated thread size for the saw mount

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Shank Hole saw fit Pilot bit Quick change Warranty
Lenox 6L 9.7/10 3/8 in or larger hex 1-1/4 to 6 in 3-1/4 in Quick change Limited lifetime
Milwaukee 49-56-9100 9.6/10 7/16 in 1-1/4 in and larger Not stated Tool-free None stated
Milwaukee Hole Dozer 9.6/10 7/16 in Not stated Not stated Tool-free None stated
JTemgle Heavy Duty 9.6/10 1/2 in hex 1-1/2 to 12 in 5 center drill bits Not stated None stated
JIECHENG 4-Piece 9.5/10 3/8 in hex 1-1/4 to 10 in 1/4 x 3 in, 1/4 x 4 in Not stated None stated

Specifications are manufacturer rated, as published by each maker and collected 19 November 2026.

How the picks were scored

Each arbor is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Hole saw arbors have no electrical safety listing to state, so every arbor here scores zero on that criterion; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Lenox 6L 9.7 29 21 21 n/a 4
Milwaukee 49-56-9100 9.6 30 21 21 n/a 0
Milwaukee Hole Dozer 9.6 29 21 20 n/a 0
JTemgle Heavy Duty 9.6 28 20 21 n/a 0
JIECHENG 4-Piece 9.5 27 20 20 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

Buying guide: what matters in a best hole saw arbor

Shank and chuck fit

The shank is the part the chuck grips, so it has to match the drill. The arbors here list 3/8 inch, 7/16 inch and 1/2 inch shanks. The JIECHENG 3/8 inch hex shank works with 3/8 or 1/2 inch chucks, while the Milwaukee 49-56-9100 fits drill chucks 1/2 inch and larger. Check the chuck on the drill before ordering.

Hole saw fit range

Each arbor fits a stated range of hole saw sizes. The Lenox 6L fits 20L to 96L hole saws from 1-1/4 to 6 inches, the JIECHENG fits bi-metal hole saws from 1-1/4 to 10 inches, the JTemgle fits hole saws from 1-1/2 to 12 inches, and the Milwaukee 49-56-9100 fits hole saws 1-1/4 inch and larger. The Milwaukee Hole Dozer states no fit range, so check the saw against the arbor before ordering.

Quick change

A quick-change arbor swaps saws without tools. Both Milwaukee arbors here list tool-free quick change, and the Lenox lists a quick-change design. The JTemgle lists a lock mechanism for stable operation, and the JIECHENG kit lists no quick-change design.

Pilot bits

The pilot bit centers the saw and keeps it from walking. The Lenox lists a 3-1/4 inch pilot drill bit with the arbor, the JIECHENG kit holds two HSS pilot bits, a 1/4 by 3 inch standard bit and a 1/4 by 4 inch extended bit, and the JTemgle box holds 5 center drill bits. The two Milwaukee arbors state no pilot bit size, so check what comes in the box before ordering.

Safety around the drill

A hole saw arbor spins fast and the saw teeth cut on contact. Wear eye and face protection, clamp the work so it cannot spin, and keep gloves away from rotating parts. Check that guards are in place and that the shank is seated in the chuck before drilling.

Use as directed. Clamp the work, keep hands clear of the spinning saw, and never run a hole saw larger than the stated fit range of the arbor.

Before You Strike an Arc

  • Match the shank to the chuck before drilling: the Milwaukee 49-56-9100 fits drill chucks 1/2 inch and larger, while the JIECHENG 3/8 inch hex shank works with 3/8 or 1/2 inch chucks.
  • Check the hole saw fit range: the Lenox 6L fits hole saws from 1-1/4 to 6 inches, and the JTemgle fits hole saws from 1-1/2 to 12 inches.
  • Seat the pilot bit and check the lock before the saw touches the work.
  • Clamp the work so it cannot spin, wear eye and face protection, and keep gloves away from rotating parts.
  • Keep a spare pilot bit on hand: the JTemgle box holds 5 center drill bits, and the JIECHENG kit holds 2 HSS pilot bits.

FAQ for welders

What is a hole saw arbor?

A hole saw arbor is the mandrel that holds a hole saw, carries the pilot bit, and fits into the drill chuck. The saw mounts onto the arbor, the pilot bit centers the cut, and the shank turns the whole assembly.

How does a hole saw arbor work?

The pilot bit drills a small center hole first, which keeps the saw from walking while the teeth cut the circle. The shank carries the turning force from the drill chuck into the saw. A quick-change arbor lets the saw swap without tools, as Milwaukee lists for both of its arbors here.

Do you need an arbor for a hole saw?

Yes, a hole saw needs an arbor to mount in a drill. The saw on its own has no shank, so the arbor supplies the shank, the pilot bit and the mount for the saw.

What size is a hole saw arbor?

Arbors vary by shank size and by the hole saws they fit. The arbors here list 3/8 inch, 7/16 inch and 1/2 inch shanks, with fit ranges from 1-1/4 to 6 inches up to 1-1/2 to 12 inches. Match both the shank and the fit range to the drill and the saw before ordering.

How to remove a hole saw from an arbor?

On a quick-change arbor, the saw releases without tools, as Milwaukee lists for both of its arbors here. Let the saw stop spinning, hold the arbor steady, and release the saw by hand. If the saw binds on the threads, check the maker instructions for that arbor before forcing it.

Related: metal fab tools hub, best hole saw for metal, annular cutter vs hole saw, bi-metal vs carbide hole saw, and best hole saw for stainless steel.

More buying guides

Metal Fab Tools ·

Best Hole Saw Under $30 (2026)

Three hole saws compared by size range, stated materials and kit contents, from a 4-inch bi-metal saw with arbor to a 25-piece carbon steel…

Metal Fab Tools ·

Best Hole Saw for Aluminum (2026)

Five carbide hole saws for aluminum: three multi-size kits and two single saws, compared by cutting range, tooth design, pilot bits and cooling advice.