Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Drill for Metal Work (2026): 5 Bits for Steel, Stainless and Sheet Metal

5 drill bits for metal work, from a 122-piece M35 cobalt set to a 15-step unibit, compared on size range, material, coating and shank.

Best Drill for Metal Work (2026): 5 Bits for Steel, Stainless and Sheet Metal
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Sinyeenglon 122-Piece SetBest OverallSinyeenglon 122-Piece Set9.5/10View on Amazon
  2. 2GRENPRO 15-Step UnibitBest Large-Hole Step BitGRENPRO 15-Step Unibit9.5/10View on Amazon
  3. 3THINKWORK 3-Size Step BitBest Small Step BitTHINKWORK 3-Size Step Bit9.4/10View on Amazon
  4. 4DelitonGude 5/32-Inch 10-PieceBest Same-Size PackDelitonGude 5/32-Inch 10-Piece9.4/10View on Amazon

A dull bit on stainless steel walks off the mark, squeals, and leaves a ragged hole that no amount of filing will fix. The fix is the right bit for the metal in front of you, with the right material and the right point, and this guide picks the best drill for metal work from sets and step bits that state what they are made of.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Sinyeenglon 122-Piece Set: A 122-piece M35 cobalt set from 1/16 to 1/2 inch, in 19 sizes, with an index case and the widest size range here. Check price on Amazon
  • Best Large-Hole Step Bit GRENPRO 15-Step Unibit: 15 hole sizes from 1/4 to 2-1/2 inches in one M35 cobalt bit with a TiAlN coating and a 1/2 inch shank. Check price on Amazon
  • Best Small Step Bit THINKWORK 3-Size Step Bit: 3 sizes from 3/16 to 1-3/8 inches, a four-flute design and a 1/4 inch shank. Check price on Amazon
  • Best Same-Size Pack DelitonGude 5/32-Inch 10-Piece: 10 pieces of 5/32 inch M35 cobalt with a 135 degree tip for repeat holes in steel and cast iron. Check price on Amazon

The machines

Sinyeenglon Cobalt Drill Bits Set for Hardened

Sinyeenglon Cobalt Drill Bits Set for Hardened

Sinyeenglon9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 122-piece M35 cobalt set covering 1/16 to 1/2 inch in 19 sizes, with a compartment index case and the widest range here.

Pros

  • 122 pieces in 19 sizes from 1/16 to 1/2 inch, the widest range here
  • M35 cobalt with full grinding and a stated hardness up to 67
  • Maker claims up to 12 times the life of an average HSS titanium coated bit
  • Index case with sizes printed on the lid for fast access

Cons

  • No shank size is stated, so check fit with the drill chuck
  • No warranty term in the listing
  • Case measures 9.84 x 8.07 x 1.85 inches, so it takes bench or drawer space
  • Largest bit is 1/2 inch, so bigger holes need a step bit
GRENPRO Step Drill Bit, 15-Step 1/4"-2-1/2"

GRENPRO Step Drill Bit, 15-Step 1/4"-2-1/2"

GRENPRO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-step unibit from 1/4 to 2-1/2 inches in M35 cobalt HSS with a TiAlN coating and two spiral flutes.

Pros

  • 15 hole sizes from 1/4 to 2-1/2 inches in one bit
  • M35 5% cobalt HSS with a TiAlN coating
  • Two spiral flutes channel swarf away from the cutting edge
  • Deep etched size markings for quick size selection

Cons

  • 1/2 inch shank needs a chuck that takes 1/2 inch
  • No warranty term in the listing
  • Top step suits sheet metal and thin stock, not thick plate
  • No storage case is stated
THINKWORK Four Spiral Flute Step Drill Bit

THINKWORK Four Spiral Flute Step Drill Bit

THINKWORK9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A four-flute step bit with 3 sizes from 3/16 to 1-3/8 inches and a 1/4 inch shank, with laser-engraved size markings.

Pros

  • 3 sizes from 3/16 to 1-3/8 inches in one bit
  • Four-flute design stated to reduce wobbling and improve stability
  • Laser-engraved size markings on each step
  • 1/4 inch shank, stated in the listing

Cons

  • Alloy steel HSS, not cobalt, so it gives up the cobalt edge on hard metal
  • Top size is 1-3/8 inches, below the GRENPRO unibit at 2-1/2 inches
  • One bit only, with no spare in the pack
  • No case or storage is stated
DelitonGude 5/32inch HSS M35 Cobalt Twist Drill

DelitonGude 5/32inch HSS M35 Cobalt Twist Drill

DelitonGude9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

10 pieces of 5/32 inch M35 cobalt twist bits with a 135 degree tip, 75 mm long, for repeat holes in steel and cast iron.

Pros

  • 10 pieces of the same 5/32 inch size, so spares are on hand
  • M35 high speed steel with 5% cobalt
  • 135 degree tip stated to cut fast and prevent walking
  • Full-grinding nitriding for wear resistance

Cons

  • One size only, so it cannot cover other hole sizes
  • No shank size is stated
  • Total length is 75 mm with a 45 mm work length, so reach is limited
  • No storage case is stated
ForgeWorx 3/32 Inch Cobalt Drill Bits 2pcs

ForgeWorx 3/32 Inch Cobalt Drill Bits 2pcs

Forgeworx9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Two 3/32 inch by 4 inch M35 cobalt bits with a TiAlN coating, a pilot point tip and a 1/4 inch hex shank.

Pros

  • M35 cobalt with a TiAlN coating for hard metals
  • Pilot point tip stated to prevent slipping
  • 1/4 inch hex shank, stated in the listing
  • Two pieces, so a spare is in the pack

Cons

  • One size only, 3/32 inch, for small holes
  • Only two pieces in the pack
  • No storage case is stated
  • Small diameter suits pilot holes and thin stock, not large holes

Spec sheet comparison

Model Gear Score Size range Material Coating Pieces Shank Warranty
Sinyeenglon 122-Piece Set 9.5/10 1/16 to 1/2 in M35 cobalt HSS Not stated 122 Not stated None stated
GRENPRO 15-Step Unibit 9.5/10 1/4 to 2-1/2 in M35 cobalt HSS TiAlN 1 1/2 in None stated
THINKWORK 3-Size Step Bit 9.4/10 3/16 to 1-3/8 in Alloy steel HSS Not stated 1 1/4 in None stated
DelitonGude 5/32-Inch 10-Piece 9.4/10 5/32 in M35 cobalt HSS Nitriding 10 Not stated None stated
ForgeWorx 3/32-Inch 2-Piece 9.3/10 3/32 in M35 cobalt TiAlN 2 1/4 in hex None stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 20 November 2026.

How the picks were scored

Each bit is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Drill bits carry no electrical safety listing, so that criterion does not apply here, and no listing here states a warranty term, so that criterion does not apply either. The ranking comes from the other criteria: how well the stated specs fit metal work, how solid the stated material and coating are, and what the stated size range and piece count give for the money.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Sinyeenglon 122-Piece Set 9.5 30 21 22 0 0
GRENPRO 15-Step Unibit 9.5 29 21 21 0 0
THINKWORK 3-Size Step Bit 9.4 27 20 21 0 0
DelitonGude 5/32-Inch 10-Piece 9.4 26 19 20 0 0
ForgeWorx 3/32-Inch 2-Piece 9.3 24 19 19 0 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

Buying guide: choosing the best drill for metal work

Cobalt or plain high speed steel

M35 cobalt is the material to look for on stainless steel, cast iron and hardened metal. The M35 cobalt bits here are the Sinyeenglon set, the GRENPRO unibit, the DelitonGude set and the ForgeWorx pair, with the GRENPRO and DelitonGude listings stating 5% cobalt. The Sinyeenglon listing states a hardness up to 67 with full grinding. The THINKWORK step bit is alloy steel high speed steel, which suits thin metal, copper, aluminum, iron, carbon steel, wood and plastic.

Twist bits or step bits

Twist bits drill one size, so a set covers a range with a bit for each diameter. The Sinyeenglon set covers 1/16 to 1/2 inch in 19 sizes, and the DelitonGude set gives 10 pieces of 5/32 inch for repeat holes. Step bits enlarge holes in sheet metal and thin stock without swapping bits: the GRENPRO bit covers 15 sizes from 1/4 to 2-1/2 inches, and the THINKWORK bit covers 3 sizes from 3/16 to 1-3/8 inches. Pick twist bits for deep holes in solid stock, and step bits for clean, larger holes in sheet metal.

Shank size and chuck fit

The shank has to fit the chuck, so check it before ordering. The GRENPRO unibit uses a 1/2 inch shank, and the THINKWORK step bit and the ForgeWorx pair use a 1/4 inch shank, the ForgeWorx one hex. The Sinyeenglon set and the DelitonGude set state no shank size in their listings, so measure the shank on arrival if the chuck fit matters for the work.

Coatings and tips

Coatings and tips decide how a bit starts and how long the edge lasts. The GRENPRO unibit and the ForgeWorx pair carry a TiAlN coating, which the GRENPRO listing states resists friction and abrasive wear at high temperature. The DelitonGude bits use full-grinding nitriding, and the maker states a 135 degree tip that cuts fast and prevents walking. The ForgeWorx bits have a pilot point tip, which the maker states prevents slipping and helps increase drilling speed.

Size range and spares

Small bits break and dull first, so spares matter. The Sinyeenglon set leans small on purpose, with 30 pieces of 1/16 inch, 10 pieces of 1/8 inch, and 5 pieces each of 3/16 and 1/4 inch. The DelitonGude set gives 10 pieces of 5/32 inch, and the ForgeWorx pair gives 2 pieces of 3/32 inch. A step bit has no spares in the pack, so a dull step means a new bit.

Use as directed. Wear eye and face protection, clamp the work so it cannot spin, keep guards in place, and keep gloves away from rotating parts. Let the bit cut at a steady feed and clear chips with the spindle stopped. See OSHA machine guarding and our Safety Disclaimer.

Before You Strike an Arc

  • Check the shank first: the GRENPRO bit needs a 1/2 inch chuck, while the THINKWORK and ForgeWorx bits use a 1/4 inch shank.
  • Count the set on arrival: the Sinyeenglon box should hold 122 pieces in 19 sizes, with the counts printed on the lid.
  • Match the bit to the metal: M35 cobalt for stainless steel and cast iron, and step bits for sheet metal and thin stock.
  • Clamp the work and wear eye protection before the bit spins.

FAQ for welders

What drill bit works on stainless steel?

The M35 cobalt bits in this guide state stainless steel as a material: the Sinyeenglon set, the GRENPRO unibit, the DelitonGude set and the ForgeWorx pair. Cobalt holds hardness under heat, which is what stainless steel demands. The THINKWORK step bit is alloy steel high speed steel, and its listing names thin metal, copper, aluminum, iron and carbon steel.

What is a step drill bit for?

A step bit drills and enlarges holes in sheet metal and thin stock without swapping bits. The GRENPRO bit covers 15 sizes from 1/4 to 2-1/2 inches, and the THINKWORK bit covers 3 sizes from 3/16 to 1-3/8 inches. Deep etched markings on the GRENPRO bit and laser-engraved markings on the THINKWORK bit help pick the exact diameter.

How do I keep a drill bit from wandering on metal?

Start with a point made to stay put. The ForgeWorx bits have a pilot point tip, which the maker states prevents slipping, and the DelitonGude bits have a 135 degree tip with self-centering, which the maker states prevents walking. Clamp the work so it cannot spin, and let the bit cut at a steady feed. The DelitonGude listing recommends a drill press to control RPM on hard metal.

Do I need a 122-piece set, or will a few bits do?

It depends on how many sizes the work needs. The Sinyeenglon set covers 1/16 to 1/2 inch in 19 sizes, with spares of the small sizes that wear out first. A single step bit covers a range in one tool, and a 10-piece pack of 5/32 inch bits covers repeat holes in one size. Match the buy to the holes the work actually needs.

What shank sizes do these bits use?

The GRENPRO unibit uses a 1/2 inch shank, and the THINKWORK step bit and the ForgeWorx pair use a 1/4 inch shank, the ForgeWorx one hex. The Sinyeenglon set and the DelitonGude set state no shank size, so check the chuck fit before ordering.

Related: best drill bit for stainless steel metal, best drill bit set for impact driver, drilling and tapping chart, tapping drill chart, size S drill bit, thread repair kit, and the sheet metal and tube hub.

More buying guides

Metal Fab Tools ·

Do Drill Bit Sharpeners Work?

A dull bit wanders and burns its way through steel, and a sharpener can put a fresh point back on it, so this guide…