Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Do Drill Bit Sharpeners Work?

A dull bit wanders and burns its way through steel, and a sharpener can put a fresh point back on it, so this guide shows how 4 sharpeners do that job and which one fits the bits on a shop bench.

Do Drill Bit Sharpeners Work?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Drill Doctor 500X Drill Bit Sharpener for 3/32Drill Doctor 500X Drill Bit Sharpener for 3/329.5/10View on Amazon
  2. 2VEVOR Drill Bits SharpenerVEVOR Drill Bits Sharpener9.5/10View on Amazon
  3. 3Drill Bit Sharpener, Electric Drill Bit SharpenerDrill Bit Sharpener, Electric Drill Bit Sharpener9.4/10View on Amazon
  4. 4𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 Circular Drill Bit Sharpener for 4-1/2in𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 Circular Drill Bit Sharpener for 4-1/2in9.3/10View on Amazon

A dull drill bit wanders off the mark, squeals against steel and leaves a ragged hole, and a fresh bit costs money every time one goes dull. Do drill bit sharpeners work? Yes, when the jig or machine holds a steady point angle and the wheel suits the bit steel, a sharpener grinds a fresh cutting edge back onto a dull bit. The sharpeners in this guide show how that works in practice.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Drill Doctor 500X Drill Bit Sharpener for 3/32

Drill Doctor 500X Drill Bit Sharpener for 3/32

Drill Doctor9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A bench sharpener for 3/32 to 1/2 inch bits with 118 or 135 degree point angles, split point sharpening and a 180 grit diamond wheel, plus the only stated warranty here.

Pros

  • Sharpens 3/32 to 1/2 inch twist and masonry bits, with a 3/4 inch chuck sold separately
  • 118 or 135 degree point angles to match general work or harder materials
  • Split point sharpening with a Push to Stop port to keep from over splitting
  • 3 year warranty, the only stated warranty term in this guide

Cons

  • Handles bits to 1/2 inch only unless the 3/4 inch chuck is bought separately
  • No stated speed or motor figure in the listing
  • One wheel grit, 180, with no finer or coarser wheel in the box
  • Needs bench space at 13.75 x 5.75 x 11.75 inches
VEVOR Drill Bits Sharpener

VEVOR Drill Bits Sharpener

VEVOR9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A bench sharpener for 3 to 20 mm bits with 18 collets, 95 to 135 degree point angles, 4 lip relief angles and CBN and SDC wheels.

Pros

  • 18 elastic collets cover 3 to 20 mm bits, the widest range here
  • 95 to 135 degree point angle adjustment plus 4 lip relief angles
  • CBN wheel for high speed steel and SDC wheel for alloy tungsten steel
  • 2 collet chucks in the box for a firm hold while grinding

Cons

  • No warranty term is stated
  • At 20.1 lb it is a bench unit rather than a carry-along tool
  • Needs a collet change for each bit size
  • Point angle and lip relief both need manual setup
Drill Bit Sharpener, Electric Drill Bit Sharpener

Drill Bit Sharpener, Electric Drill Bit Sharpener

MDPSDS9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A portable electric sharpener for 1/8 to 15/32 inch twist bits at a fixed 130 degree angle, with a non-slip base, a one-touch switch and spare grinding wheel accessories.

Pros

  • Covers 19 sizes of 130 degree twist bits from 1/8 to 15/32 inch
  • Grinds a bit within 10 seconds, per the listing
  • Non-slip base and one-touch switch suit a beginner
  • Grinding wheel accessories in the box for a worn wheel

Cons

  • Fixed 130 degree angle, so no 118 or 135 degree choice
  • No warranty term is stated
  • Bit range stops at 15/32 inch, so larger bits need another tool
  • Hand pressure sets the grind, so results vary with the hand on the bit
𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 Circular Drill Bit Sharpener for 4-1/2in

𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 Circular Drill Bit Sharpener for 4-1/2in

smartang9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A circular jig that mounts on a 4-1/2 or 5 inch angle grinder and sharpens 2 to 13 mm bits at 118 degrees, with metal screws and copper rings in the screw holes.

Pros

  • Fits 4-1/2 inch (115 mm) and 5 inch (125 mm) angle grinders
  • Sharpens 2 to 13 mm bits, 0.08 to 0.63 inch
  • Metal screws and copper rings where other jigs use plastic screws
  • Integrated molding in place of 3D printed parts, per the listing

Cons

  • Needs an angle grinder to work; it is a jig, not a standalone sharpener
  • Fixed 118 degree grinding angle, with no 135 degree option
  • No warranty term is stated
  • Uses the angle grinder for grinding, so no wheel comes with it

Do drill bit sharpeners work?

They work by grinding the cutting edge of a twist bit back to a set point angle. The point angle decides how the bit bites: the Drill Doctor lists 118 degrees for general purpose work and 135 degrees for harder materials, while the VEVOR adjusts from 95 to 135 degrees. What a sharpener cannot do is fix a bit that is bent or cracked past the point; it grinds the point, not the body of the bit.

Wheel choice matters too. The Drill Doctor runs a 180 grit diamond wheel, the VEVOR offers CBN for high speed steel and SDC for alloy tungsten steel, and the MDPSDS ships grinding wheel accessories for a worn wheel. Match the wheel to the bit steel the listing names.

What a sharpener has to get right

  • Point angle. 118 degrees suits general purpose work and 135 degrees suits harder materials, per the Drill Doctor listing. The VEVOR covers 95 to 135 degrees, while the MDPSDS holds a fixed 130 degrees and the smartang jig holds a fixed 118 degrees.
  • Bit range. The Drill Doctor covers 3/32 to 1/2 inch, the VEVOR covers 3 to 20 mm, the MDPSDS covers 1/8 to 15/32 inch, and the smartang jig covers 2 to 13 mm.
  • Lip relief. The VEVOR grinds 4 types of lip relief angle through positioner pins. The other 3 state no lip relief figure.
  • Wheel and material. Carbide, cobalt, high speed steel, black oxide, TiN coated and masonry bits are all named in the Drill Doctor listing, and the VEVOR pairs its CBN wheel with high speed steel and its SDC wheel with alloy tungsten steel.

See the 118 vs 135 degree drill bit guide for how the two common angles differ, and how to sharpen a drill bit for the steps a jig or machine follows.

The gear for this job

Sharpening is the step that brings a dull bit back to work, and each sharpener below handles a different slice of that step.

Side by side

Gear Score Bit range Point angle Wheels
Drill Doctor 500X 9.5/10 3/32 to 1/2 in 118 or 135 degrees 180 grit diamond
VEVOR MR-20G 9.5/10 3 to 20 mm 95 to 135 degrees CBN and SDC
MDPSDS RS-1 9.4/10 1/8 to 15/32 in 130 degrees Grinding wheel accessories
smartang Circular Jig 9.3/10 2 to 13 mm 118 degrees Angle grinder wheel

Every figure in the table matches the card for that sharpener.

How to pick one for your bench

  • Match the range to your bits. Only the VEVOR covers bits above 13 mm, with collets for 3 to 20 mm, while common twist bits fit the Drill Doctor range of 3/32 to 1/2 inch.
  • Pick the angle you need. The Drill Doctor gives a choice of 118 or 135 degrees, the VEVOR adjusts across 95 to 135 degrees, and the MDPSDS and the smartang jig each hold one fixed angle.
  • Count the collets. The VEVOR ships 18 collets for its range, the Drill Doctor ships a 1/2 inch chuck with a 3/4 inch chuck sold separately, and the MDPSDS holds its bits on a positioning plate.
  • Check the warranty. Only the Drill Doctor states one, 3 years; the other 3 state no term.

For the bits themselves, see the best drill bit set for metal guide and drill bit tips for metal and fabrication.

Grinding safety on the bench

A sharpener is a grinder, so treat it like one. Wear eye and face protection, keep gloves away from rotating parts, and keep the guards in place. Work with ventilation and keep flammable material clear of sparks. See the OSHA machine guarding page and the drill press safety guide.

FAQ for welders

Can a drill bit sharpener fix a chipped bit?

A sharpener grinds a fresh point onto the cutting edge, so a bit with a chipped or dull tip can come back to work when enough steel is left at the point. The Drill Doctor lists split point sharpening for bits that walk at the start of a hole, and the VEVOR grinds both point angle and lip relief. When the damage runs past the point, no sharpener in this guide states a fix for it.

What point angle should I use, 118 or 135 degrees?

The Drill Doctor listing ties 118 degrees to general purpose work and 135 degrees to harder materials. The VEVOR adjusts from 95 to 135 degrees, so it covers both, and the MDPSDS holds a fixed 130 degrees. When the bit maker states an angle, use that one; otherwise 118 degrees is the general purpose angle the Drill Doctor lists.

Do drill bit sharpeners work on masonry bits?

The Drill Doctor lists masonry bits among the bits it sharpens, along with carbide, cobalt, high speed steel, black oxide and TiN coated bits. The VEVOR lists a CBN wheel for high speed steel and an SDC wheel for alloy tungsten steel. The MDPSDS lists twist bits and the smartang jig lists bits from 2 to 13 mm without naming masonry, so check the listing for the model you pick.

What size bits can these sharpeners handle?

The Drill Doctor covers 3/32 to 1/2 inch, with a 3/4 inch chuck sold separately. The VEVOR covers 3 to 20 mm through 18 collets. The MDPSDS covers 1/8 to 15/32 inch, and the smartang jig covers 2 to 13 mm, or 0.08 to 0.63 inch.

How long does it take to sharpen a bit?

The MDPSDS listing says a bit grinds within 10 seconds, and the smartang listing says the grind finishes within a few seconds once the jig is on the grinder. The Drill Doctor and the VEVOR state no grind time, so their listings give no figure to quote.

Related: do drill bit sharpeners work, best drill bit set for metal, drill bit tips, and HSS vs cobalt drill bit.

More buying guides