How to Sharpen Drill Bit Edges: Tools and Method
How to sharpen a drill bit at home: set the angle, grind each edge the same, and check the point, with sharpeners from 3/32 to 3/4 inch.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Drill Doctor 750X Drill Bit Sharpener9.6/10View on Amazon - 2
Drill Doctor 350X Electric Drill Bit Sharpener9.5/10View on Amazon - 3
Electric Drill Bit Sharpener for 3mm to 12mm Drill9.4/10View on Amazon - 4
Electric Drill Bit Sharpener9.3/10View on Amazon
The question of how to sharpen drill bit edges comes up when a dull bit skates across metal instead of cutting, and the answer is a sharpener that holds the bit at the right angle while a wheel grinds the edge back. The sharpener holds the bit in its chuck or guide, the wheel takes a little metal off each cutting edge, and the point comes back with even edges at the angle the sharpener is set to. This guide shows the method and the sharpeners that do it.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Drill Doctor 750X Drill Bit Sharpener
A full-size electric sharpener for twist and masonry bits from 3/32 to 3/4 inch, with adjustable point angles from 115 to 140 degrees and a 180 grit diamond wheel.
Pros
- Widest range here: 3/32 to 3/4 inch bits
- Point angles adjust from 115 to 140 degrees
- Creates or restores split points with a Push to Stop port
- Sharpens carbide, cobalt, HSS, black oxide, TiN coated and masonry bits
Cons
- Needs a power outlet where you sharpen
- No spare diamond wheel is listed in the box
- 6 foot cord limits where it sits on the bench

Drill Doctor 350X Electric Drill Bit Sharpener
An electric sharpener for twist and masonry bits from 3/32 to 1/2 inch, with V Block chuck jaws that stop smaller bits from twisting.
Pros
- Covers 3/32 to 1/2 inch, the common homeowner sizes
- V Block chuck jaws help prevent smaller bits from twisting
- Sharpens HSS, masonry, carbide and coated bits
- 3 year warranty stated
Cons
- No adjustable point angle is stated
- No split point feature is stated
- No wheel grit is stated
- No carrying bag is listed in the box

Electric Drill Bit Sharpener for 3mm to 12mm Drill
A 95W electric sharpener for HSS and carbon steel bits from 3mm to 12mm, grinding at 118° on 120V power.
Pros
- Covers 3mm to 12mm bits
- Fixed 118° angle for standard twist bits
- 95W motor at 1500 rpm
- Compact at 4.7 x 4.7 x 6.3 in and 2.6 lb
Cons
- No warranty term is stated
- No masonry bits are listed
- No chuck or guide detail is stated

Electric Drill Bit Sharpener
A 3-in-1 sharpening station for HSS drill bits from 7/64 to 3/8 inch, plus knives, scissors, chisels and plane blades.
Pros
- Sharpens drill bits, knives, scissors, chisels and plane blades
- Drill range 7/64 to 3/8 inch, or 3mm to 13mm
- Adjustable angle from 15 to 50 degrees
- Compact at 6.38 x 5.63 x 6.1 in and 3.26 lb
Cons
- No warranty term is stated
- No drill point angle is stated, only the station angle
- Plastic body rather than a metal one
How to sharpen drill bit: the method
Grinding a drill bit is a matter of angle and evenness. The point angle sets how the bit cuts, and the cutting edges must match in length and angle, or the bit drills oversize and wanders. A sharpener holds the bit at a set angle and grinds each edge the same way, which is what hand grinding on a bench grinder makes hard to repeat. The generic sharpener in this guide states 118°, and the Drill Doctor 750X (on Amazon) adjusts from 115 to 140 degrees, so the angle is a setting, not a guess.
- Check the bit. Look at the point under a good light. A dull bit has rounded edges and a flat where the point should be, and a chipped bit needs more grinding than a bit that is only dull.
- Pick the angle. The generic sharpener states 118°, and the 750X adjusts from 115 to 140 degrees for bits that need a different point for the material.
- Mount the bit. Seat it in the chuck or guide the sharpener provides, with the point against the wheel. The 350X uses V Block chuck jaws that help prevent smaller bits from twisting.
- Grind each edge the same. Run the wheel and grind one edge, then turn the bit and grind the other edge to match. Short passes keep the heat down; if the edge turns blue, let the bit cool before the next pass, since overheating can soften the edge.
- Check the point. The two cutting edges should be the same length and meet at the chisel edge, and the point should sit in the middle of the bit. A split point, which the 750X can create or restore, helps the bit start without wandering.
- Try the bit. Drill a scrap piece of steel and watch the cut: a sharp bit throws even curls and needs little push, while a dull bit squeals and makes dust.
Side by side
| Product | Bit size | Materials | Warranty |
|---|---|---|---|
| Drill Doctor 750X | 3/32 to 3/4 in | Twist, masonry, carbide, cobalt, HSS, TiN | 3 years |
| Drill Doctor 350X | 3/32 to 1/2 in | HSS, masonry, carbide, coated | 3 years |
| Generic 95W Sharpener | 3mm to 12mm | HSS, carbon steel | Not stated |
| Generic 3-in-1 Station | 7/64 to 3/8 in | HSS bits; knives, scissors, chisels | Not stated |
All four sharpeners grind drill bits; the 3-in-1 station also sharpens knives, scissors, chisels and plane blades, so check the bit range before buying for drill bits alone.
Bit sizes each sharpener covers
Size range is the first filter. The 750X covers 3/32 to 3/4 inch, the widest range in the Drill Doctor lineup per its listing, and the 350X covers 3/32 to 1/2 inch. The generic 95W sharpener (on Amazon) covers 3mm to 12mm, and the 3-in-1 station covers drill bits from 7/64 inch to 3/8 inch, or 3mm to 13mm. Match the range to the bits in your case before buying, and check the shank size the sharpener accepts: the 750X includes a 3/4 inch chuck, and the 350X accepts shanks from 3/32 through 1/2 inch. See our best twist drill bit set picks for the bits themselves.
Point angles and split points
The 750X sets point angles from 115 to 140 degrees and can create or restore a split point, with a Push to Stop port that helps prevent over splitting. The generic 95W sharpener grinds at 118°. The 350X and the 3-in-1 station do not state a drill point angle in their listings: the 3-in-1 states an adjustable angle from 15 to 50 degrees for the station, which covers its knife, scissor and chisel modules. If the point angle matters for your bits, pick a sharpener that states it.
Materials: HSS, carbide, cobalt and masonry
The 750X lists carbide, cobalt, high speed steel, black oxide, TiN coated and masonry bits. The 350X lists high speed steel, masonry, carbide and coated bits. The generic 95W sharpener lists HSS and carbon steel bits. The 3-in-1 station lists high speed steel drill bits, plus knives, scissors, chisels and plane blades. Masonry bits need a sharpener that states masonry, so check the material list before buying for masonry bits. Our titanium vs black oxide drill bits guide and the carbide vs cobalt drill bits guide compare the coatings and materials these sharpeners list.
The gear: sharpeners that do the job
Each sharpener below handles one part of the job: the 750X sets the angle and the point, the 350X covers the common sizes, and the generic machines cover small bits and extra tools.
FAQ for welders
What angle should a drill bit be sharpened to?
The generic sharpener in this guide states 118°, and the Drill Doctor 750X adjusts from 115 to 140 degrees. Set the angle the sharpener states for your bit, and keep it the same on each edge.
What size drill bits can these sharpeners handle?
The 750X covers 3/32 to 3/4 inch, the 350X covers 3/32 to 1/2 inch, the generic 95W sharpener covers 3mm to 12mm, and the 3-in-1 station covers drill bits from 7/64 inch to 3/8 inch. Check the range against the bits in your case.
Can these sharpeners handle masonry bits?
The 750X and the 350X list masonry bits. The generic sharpeners do not state masonry, so check the material list before buying for masonry bits.
What is a split point?
A split point is a point with a small notch ground at the center, which splits the chisel edge and helps the bit start without wandering. The 750X can create or restore a split point, and its Push to Stop port helps prevent over splitting.
How do I know when a drill bit is sharp again?
Drill a scrap piece of steel and watch the cut: a sharp bit throws even curls and needs little push, while a dull bit squeals and makes dust. Check the point too: the two cutting edges should be the same length and meet at the chisel edge.
Related: best drill bit set for wood and metal, annular cutter vs twist drill bit, best cobalt drill bit set, and the metal fab tools hub.




