Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Self Centering Drill Bit (2026): 5 Vix Bit Sets Compared

Five self centering Vix bit sets compared on bit sizes, screw fit, shank, steel and extras, from 3-piece hinge sets to a 9-bit kit with a center punch.

Best Self Centering Drill Bit (2026): 5 Vix Bit Sets Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Bosch CC2430Best OverallBosch CC24309.6/10View on Amazon
  2. 2K Kwokker 9-PieceBest for Metal HingesK Kwokker 9-Piece9.6/10View on Amazon
  3. 3WORKPRO W124828Best CoatingWORKPRO W1248289.6/10View on Amazon

Hinge screws wander. Put a plain bit in a countersunk hinge hole and it walks off center, and the screw pulls the leaf sideways when you drive it. A self centering bit solves that with a spring guide that seats in the hole and holds the bit on center while you drill the pilot. The best self centering drill bit picks below are Vix-style sets compared on bit sizes, screw fit, shank, steel and what else is in the box.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Bosch CC2430: Bosch 3-piece set for no.6, no.8 and no.10 screws with Clic-Change and a stated 1 Year warranty. Check price on Amazon
  • Widest Size Range K Kwokker 9-Piece: 9 bits from 5/64 to 1/4 inch with a storage case and a 5.2 inch center punch. Check price on Amazon
  • Best Coating WORKPRO W124828: HSS4341 bits with black oxide coating and a hex key for swaps. Check price on Amazon
  • Best for Metal Hinges K Kwokker 9-Piece: Maker states use on aluminum, copper and stainless steel door and window hinges. Check price on Amazon

The machines

BOSCH CC2430 Clic-Change 1/4in Self-Centering

BOSCH CC2430 Clic-Change 1/4in Self-Centering

Bosch9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A Bosch 3-piece Clic-Change self-centering set with no.6, no.8 and no.10 shanks for hinge pilot holes, backed by a stated 1 Year warranty.

Pros

  • Clic-Change system for changing bits without re-chucking
  • Covers no.6, no.8 and no.10 screw sizes
  • Stated 1 Year warranty, the only term here
  • Made to fit 1/4 inch drills

Cons

  • Steel grade not stated
  • Only 3 bits, with no case or punch
  • No bit sizes in inches stated
  • No hex key included
K Kwokker Self Centering Drill Bit Set with Center

K Kwokker Self Centering Drill Bit Set with Center

K Kwokker9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9-bit self centering set from 5/64 to 1/4 inch with beveled tips, a color coded case and a 5.2 inch spring loaded center punch.

Pros

  • Widest size range here, 5/64 to 1/4 inch across 9 bits
  • Includes a 5.2 inch spring loaded center punch
  • Color coded aluminum alloy storage case
  • Maker states use on aluminum, copper and stainless steel hinges

Cons

  • No warranty term is stated
  • Duplicate sizes in 7/64 and 9/64 inch
  • Heaviest set here at 0.5 pounds
  • Screw sizes per bit not stated
WORKPRO Self Centering Drill Bit Set

WORKPRO Self Centering Drill Bit Set

WORKPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-piece Vix bit set in HSS4341 steel with black oxide coating, 3/32, 7/64 and 1/8 inch bits and a hex key for swaps.

Pros

  • HSS4341 steel with black oxide coating for rust resistance
  • Covers #6, #8 and #10 sizes in 3/32, 7/64 and 1/8 inch
  • Hex key included for quick bit swaps
  • Maker states use on wood, plastic and soft metals

Cons

  • No warranty term is stated
  • Only 3 bits, with no case or punch
  • No Clic-Change system stated
  • No storage case included
Upgraded Self-Centering Hinge Drill Bit

Upgraded Self-Centering Hinge Drill Bit

jiuoici9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-piece Vix bit set in heat-treated HSS 4341 with a spring self-centering guide and 3/32, 7/64 and 1/8 inch bits.

Pros

  • Heat-treated HSS 4341 high-speed steel
  • Spring self-centering guide for straight drilling
  • Covers #6, #8 and #10 screws in 3/32, 7/64 and 1/8 inch
  • Maker states use on hardwood, softwood, MDF and thin metal sheets

Cons

  • No warranty term is stated
  • Only 3 bits, with no case or punch
  • No hex key included
  • No coating stated
2026 Upgraded Self Centering Drill Bit Set VIX

2026 Upgraded Self Centering Drill Bit Set VIX

jiuoici9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-piece CC2430 self centering set in high speed steel with a spring loaded guide and a forked tip for curved material.

Pros

  • Spring loaded self-centering guide centers the bit
  • Forked tip stated for curved and arc materials
  • Anti-slip hex shank for torque transmission
  • Clic-Change system for one-handed load and release

Cons

  • No warranty term is stated
  • Only 3 bits, with no case or punch
  • Steel grade not stated beyond high speed steel
  • No hex key included

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Bits Sizes Shank Steel Extras Warranty
Bosch CC2430 9.6/10 3 no.6, no.8, no.10 1/4 in Clic-Change Not stated None stated 1 Year
K Kwokker 9-Piece 9.6/10 9 5/64 to 1/4 in 1/4 in hex High-speed steel Case, center punch, hex key Not stated
WORKPRO W124828 9.6/10 3 3/32, 7/64, 1/8 in 1/4 in hex HSS4341, black oxide Hex key Not stated
jiuoici VIX Set 9.6/10 3 3/32, 7/64, 1/8 in 1/4 in hex HSS 4341 None stated Not stated
jiuoici CC2430 Set 9.5/10 3 3/32, 7/64, 1/8 in 1/4 in hex High speed steel None stated Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 19 November 2026.

Buying guide: choosing the best self centering drill bit

Match the bit to the screw

Size is the first check. The Bosch, WORKPRO and both jiuoici sets cover the same three sizes for #6, #8 and #10 screws, stated as 3/32, 7/64 and 1/8 inch bits on the jiuoici and WORKPRO sets. The K Kwokker set runs wider, with 9 bits from 5/64 to 1/4 inch, including duplicates in 7/64 and 9/64. Pick the set that covers the screws on your bench. Our drill index sizes guide explains how bit sizes are read.

Shank and change system

Every set here uses a 1/4 inch hex shank. Bosch and the jiuoici sets state a Clic-Change system for changing bits without re-chucking, and the WORKPRO and K Kwokker sets include a hex key for swaps. A hex shank also seats in quick-change holders and impact drivers. See our drill bit set for impact driver picks for shank fit.

Steel and coating

The jiuoici and WORKPRO sets state HSS 4341 high-speed steel, and WORKPRO adds a black oxide coating for rust resistance. The K Kwokker core is stated as high-speed steel with beveled tips that seat into a countersunk hinge hole. Bosch does not state the steel grade. For drilling metal beyond hinge work, see our drill bit to drill through metal guide.

What else is in the box

Extras differ. The K Kwokker set adds a 5.2 inch spring loaded center punch and a color coded aluminum alloy storage case. The WORKPRO set adds a hex key. The Bosch and jiuoici sets are bits only. A center punch marks the spot before drilling on metal, which suits bracket and plate work in the shop.

Use as directed. Clamp small work before drilling, keep the guide seated in the hinge hole while the bit turns, and wear eye protection. Check bit sizes against your screws on arrival, and stop if a bit runs out of true. See our Safety Disclaimer.

Before You Strike an Arc

  • Match the bit to the screw first: 3/32, 7/64 and 1/8 inch cover #6, #8 and #10 screws on the sets that state them.
  • Confirm your drill takes a 1/4 inch hex shank or a Clic-Change holder before you order.
  • Check the guide spring on arrival: it should seat in the countersunk hole and retract as you drill.
  • On metal hinges and brackets, mark the spot with a center punch before the bit touches the work.

FAQ for welders

What is a self centering drill bit?

It is a pilot bit inside a spring-loaded guide. The guide seats in a countersunk hinge hole and holds the bit on center, so the pilot hole lands in the middle of the hole instead of wandering to one side.

What sizes fit #6, #8 and #10 screws?

The jiuoici and WORKPRO sets state 3/32, 7/64 and 1/8 inch bits for #6, #8 and #10 screws. The Bosch set states no.6, no.8 and no.10 shanks. The K Kwokker set runs from 5/64 to 1/4 inch across 9 bits.

Can self centering bits drill metal?

Some makers state metal use. The K Kwokker set states use on aluminum, copper and stainless steel hinges. The jiuoici set states thin metal sheets, and WORKPRO states soft metals. Check the maker statement for your material.

How long do drill bits last?

Life depends on material, speed and heat, and no maker here states a hole count. The sets state HSS 4341 or high-speed steel, and WORKPRO adds a black oxide coating for rust resistance. Keep bits sharp and replace a bit that starts to wander.

Do I need a center punch with these bits?

For hinge holes, the guide centers the bit, so no punch is needed. For flat metal stock without a countersunk hole, a punch mark gives the bit a starting point. The K Kwokker set includes a 5.2 inch spring loaded center punch.

Related: drilling tips for metal, best drill bit set for hard steel, and the metal fab tools hub.

Scoring, line by line

Each set is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Drill bits carry no electrical safety listing to state, so every set here scores zero on that criterion; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Bosch CC2430 9.6 29 21 20 n/a 2
K Kwokker 9-Piece 9.6 32 21 22 n/a 0
WORKPRO W124828 9.6 29 20 20 n/a 0
jiuoici VIX Set 9.6 28 20 20 n/a 0
jiuoici CC2430 Set 9.5 28 19 20 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides