Best Drill Bit Set for Hard Steel (2026): 4 Picks, Cobalt and HSS
Four drill bit sets for hard steel, compared on cobalt steel, size range, point, shank and case, from what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallHIDOTOL 115-Piece M359.6/10View on Amazon - 2
Best Compact SetWildBossy 20-Piece M359.6/10View on Amazon - 3
Best Stubby SetNordWolf 5-Piece Stubby9.5/10View on Amazon - 4
Best HSS SetDrill America KFD29J-PC9.5/10View on Amazon
A bracket goes back on a trailer frame, a bolt hole lands in a plate that has already been hardened, and the bit on the drill press starts to skate instead of bite. Hard steel does that to ordinary bits: the point dulls, the hole wanders, and the work heats up. The best drill bit set for hard steel is the one that keeps a sharp point in that kind of metal, in the sizes a shop actually drills, and this guide compares sets on what each listing states: cobalt steel, size range, point, shank and case.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall HIDOTOL 115-Piece M35: M35 cobalt in 115 pieces, fractional, letter and wire sizes, a 135 degree split point and an indexed metal case. Check price on Amazon
- Best Compact Set WildBossy 20-Piece M35: M35 cobalt in 20 pieces with doubled small sizes, a 3-flat shank and a maker claim of 67 Rockwell hardness. Check price on Amazon
- Best Stubby Set NordWolf 5-Piece Stubby: Five short M35 cobalt bits, 1.83 to 2.32 inches, with a 1/4 inch hex shank for tight spaces. Check price on Amazon
- Best HSS Set Drill America KFD29J-PC: 29 HSS bits, 1/16 to 1/2 inch in 1/64 inch steps, with a black and gold oxide finish and a round case. Check price on Amazon
The machines

HIDOTOL 115PCS Cobalt Drill Bit Set M35 HSS
A 115-piece M35 cobalt set covering fractional, letter and wire sizes, with a 135 degree split point and an indexed metal case.
Pros
- 115 pieces: 29 fractional, 26 letter and 60 wire sizes in one case
- M35 cobalt steel with 5% cobalt, listed for stainless steel, cast iron, titanium alloy and hard plastics
- 135 degree split point and fully ground twist for self-centering and chip clearing
- Indexed metal case keeps every size in its marked slot
Cons
- At 7.5 lb, the heaviest set here to carry to a job
- A 13.5 inch case takes more bench and shelf space than the smaller sets
- Round straight shank only, with no flat or hex shank to resist spinning
- No hardness rating is stated in the listing

M35 Cobalt Drill Bit Set 20PCS(1/16"-1/2")
A 20-piece M35 cobalt set with doubled small sizes, a 3-flat shank and a maker claim of 67 Rockwell hardness.
Pros
- M35 cobalt steel, listed at 67 Rockwell hardness by the maker
- Doubled bits in the small sizes: 1/16, 5/64, 3/32, 7/64, 1/8 and 3/16 inch
- 3-flat shank resists spinning in the chuck
- Ti surface and 135 degree split point for self-centering and chip clearing
Cons
- Only 20 pieces, with single bits in the larger sizes
- No letter or wire sizes for odd holes
- Plastic storage case, not a metal case
- No warranty term is stated

NordWolf 5-Piece M35 Cobalt Stubby Drill Bit Set
Five short M35 cobalt bits with a 1/4 inch hex shank, sized 3/32 to 5/16 inch for tight spaces in stainless steel and hard metals.
Pros
- Stubby bits, 1.83 to 2.32 inches, reach tight spaces a jobber bit cannot
- M35 cobalt steel, listed for stainless steel, cast iron, titanium, bronze and aluminium
- 1/4 inch hex shank fits standard and quick-change chucks and drivers
- 135 degree split point multi-blade tip for self-centering and fast drilling
Cons
- Only five sizes, 3/32 to 5/16 inch, so larger holes need another set
- No bit larger than 5/16 inch in the set
- Short length limits depth on thick stock
- No hardness rating is stated in the listing

Drill America - KFD29J-PC 29 Piece Heavy Duty High
A 29-piece HSS set, 1/16 to 1/2 inch in 1/64 inch steps, with a black and gold oxide finish and a round case.
Pros
- 29 jobber length bits cover 1/16 to 1/2 inch in 1/64 inch steps
- 135 degree split point penetrates hard material without a pilot hole, per the maker
- Black and gold oxide finish resists corrosion and adds hardness, per the maker
- Round case keeps the set together on the bench
Cons
- HSS steel, while the other three sets here use M35 cobalt
- Shank type is not stated in the listing
- Jobber length only, with no stubby bit for tight spaces
- No warranty term is stated
Other welders and gear to compare
DEWALT Drill Bit SetCheck price on Amazon
M35 5% Cobalt Metric Drill Bits SetCheck price on Amazon
STROTON Cobalt Drill Bit SetCheck price on Amazon
EZARC M35 Cobalt Stubby Drill Bit Set for Hard MetalCheck price on Amazon
NordWolf 14-Piece M35 Cobalt Drill Bit SetCheck price on Amazon
toolant Center Drill Bit SetCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Material | Pieces | Size range | Point | Shank | Case |
|---|---|---|---|---|---|---|---|
| HIDOTOL 115-Piece M35 | 9.6/10 | M35 cobalt HSS | 115 | 1/16 to 1/2 in, A to Z, #1 to #60 | 135 degree split | Round straight | Indexed metal |
| WildBossy 20-Piece M35 | 9.6/10 | M35 cobalt HSS | 20 | 1/16 to 1/2 in | 135 degree split | 3-flat | Plastic |
| NordWolf 5-Piece Stubby | 9.5/10 | M35 cobalt | 5 | 3/32 to 5/16 in | 135 degree split | 1/4 in hex | Plastic box |
| Drill America KFD29J-PC | 9.5/10 | HSS | 29 | 1/16 to 1/2 in | 135 degree split | Not stated | Round |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 18 November 2026.
How the sets were scored
Each set is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Drill bit sets carry no electrical safety listing to state, and no listing here states a warranty term, so every set scores zero on those two criteria; the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| HIDOTOL 115-Piece M35 | 9.6 | 30 | 21 | 21 | n/a | 0 |
| WildBossy 20-Piece M35 | 9.6 | 29 | 20 | 21 | n/a | 0 |
| NordWolf 5-Piece Stubby | 9.5 | 28 | 20 | 18 | n/a | 0 |
| Drill America KFD29J-PC | 9.5 | 24 | 20 | 20 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.
Buying guide: the best drill bit set for hard steel, what to check
M35 cobalt or plain HSS
Three sets here use M35 cobalt steel with 5% cobalt, and one uses plain high speed steel. The HIDOTOL listing describes M35 cobalt as suited to tough, high tensile strength material, naming stainless steel, cast iron, high temperature alloy and titanium alloy. The WildBossy listing claims 67 Rockwell hardness and a life 12 times longer than normal HSS bits. See HSS vs cobalt drill bit.
Point angle and shank
All four sets list a 135 degree split point, which the makers describe as self-centering, so the bit starts where it is placed instead of walking. Shanks differ: the HIDOTOL set uses a round straight shank, the WildBossy set a 3-flat shank that resists spinning, and the NordWolf set a 1/4 inch hex shank for standard and quick-change chucks. The Drill America listing does not state a shank type.
Size range
The HIDOTOL set covers the widest range: 29 fractional sizes from 1/16 to 1/2 inch in 1/64 inch steps, plus 26 letter sizes from A to Z and 60 wire sizes from #1 to #60. The WildBossy and Drill America sets cover the same fractional range in 20 and 29 pieces. The NordWolf set covers only five sizes, 3/32 to 5/16 inch.
Length and tight spaces
The NordWolf bits are stubby, 1.83 to 2.32 inches, and that short length reaches into spaces a jobber length bit cannot. The Drill America bits are jobber length, and the other two listings do not state a length.
Cutting oil and heat
Hard steel rewards slow speed, steady pressure and cutting oil. The WildBossy listing advises attention to speed, pressure and heat control, and the HIDOTOL listing notes that a fully ground twist clears chips faster and cuts friction and heat. See best cutting oil for drilling metal.
Use as directed. Clamp the work before drilling, wear eye protection, keep gloves away from rotating parts, and keep guards in place on the drill press. Let the bit cut at its own pace and use cutting oil on hard steel to keep the point cool. See the drill press safety guide and the Safety Disclaimer.
Before You Strike an Arc
- Check the case on arrival: every size should sit in its marked slot, and a missing bit shows at a glance.
- Match the shank to the chuck: round straight, 3-flat and 1/4 inch hex shanks all fit a standard chuck, and the hex shank also fits quick-change drivers.
- Keep cutting oil on hand for hard steel, and mind speed, pressure and heat control when drilling.
- Clamp the work and check the point before the first hole: a 135 degree split point should start on its mark without walking.
FAQ for welders
What makes a drill bit set good for hard steel?
Cobalt steel holds a point in hard metal longer than plain high speed steel, and a 135 degree split point starts on its mark without walking. Three sets here use M35 cobalt steel with 5% cobalt, and all four list a 135 degree split point.
Is M35 cobalt better than HSS for hard steel?
For hard steel, the cobalt sets here rank above the plain HSS set. The WildBossy listing claims 67 Rockwell hardness and a life 12 times longer than normal HSS bits, while the Drill America set is the plain HSS one and ranks last here. See HSS vs cobalt drill bit.
What does a 135 degree split point do?
A split point is ground so the bit centers itself on the mark and starts cutting at once, instead of skating across the work. The Drill America listing adds that its point penetrates hard material without a pilot hole and makes small chips that reduce clogging.
What sizes do I need in a drill bit set for hard steel?
Most shop work in hard steel falls in the fractional range from 1/16 to 1/2 inch, which three sets here cover. The HIDOTOL set adds 26 letter sizes and 60 wire sizes for odd holes, while the NordWolf set covers only five sizes, 3/32 to 5/16 inch.
Do I need cutting oil when drilling hard steel?
Cutting oil keeps the point cool and the chips clearing, which matters more in hard steel than in mild steel. The WildBossy listing advises attention to speed, pressure and heat control when drilling.
Related: best drill bit to drill hardened steel, best drill bit set for metal, best drill bits for drilling stainless steel, best drill bit to drill through steel, best step drill bit for thick metal, and the metal fab tools hub.




