Best Cobalt Drill Bit Set (2026)
Cobalt drill bit sets compared for hard metal work, with stated cobalt grades, size ranges and cases.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Top PickBosch CO21B M42 Cobalt Set9.7/10View on Amazon - 2
Widest RangeMACXCOIP M35 Cobalt Set, 29 Pieces9.7/10View on Amazon - 3
Stated TermGMTOOLS M35 Cobalt Set, 15 Pieces9.6/10View on Amazon - 4
Clear Lid StorageDEWALT DWA1240 Cobalt Set, 14 Pieces9.5/10View on Amazon
A repair on the bench starts with a hole that has to land where it is marked, in steel that does not forgive a wandering bit. When the bit walks, the hole moves, and the best cobalt drill bit set is the set whose split point starts on the mark and whose cobalt steel keeps cutting in hard metal.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Top Pick Bosch CO21B M42 Cobalt Set: M42 cobalt with 8% cobalt stated, 21 pieces, three-flat shank, included case Check price on Amazon
- Widest Range MACXCOIP M35 Cobalt Set, 29 Pieces: 29 pieces from 1/16 inch to 1/2 inch, M35 cobalt, index storage case Check price on Amazon
- Stated Term GMTOOLS M35 Cobalt Set, 15 Pieces: M35 cobalt with 5% cobalt stated, 15 pieces, and a 30-day money back term stated Check price on Amazon
- Clear Lid Storage DEWALT DWA1240 Cobalt Set, 14 Pieces: 14-piece cobalt alloy set with clear lid, clip latch and connectable storage Check price on Amazon
The machines

BOSCH CO21B 21-Piece Assorted Set with Included
A 21-piece M42 cobalt set with an included case, 8% cobalt stated, split points on bits 1/8 inch and larger, and a three-flat shank on bits 3/16 inch and larger.
Pros
- M42 cobalt with 8% cobalt stated, the highest cobalt content stated here
- Split points on bits 1/8 inch and larger for easy starts
- Three-flat shank on bits 3/16 inch and larger for better bit grip
- Included case stated, with a thick web-helix design for stability
Cons
- No full size range is stated
- No concrete warranty term is stated
- No safety standard is stated

MACXCOIP 29Pcs(1/16"-1/2")
A 29-piece M35 cobalt set from 1/16 inch to 1/2 inch, with a 135 degree point tip, twist design and an index storage case.
Pros
- 29 pieces, the largest piece count here
- Size range of 1/16 inch to 1/2 inch, the widest range stated here
- M35 cobalt stated for stainless steel, cast iron, copper and aluminum
- Index storage case stated for easy storage and sorting
Cons
- Cobalt percentage is not stated
- No concrete warranty term is stated
- No safety standard is stated
- No shank style is stated

GMTOOLS 15Pcs Cobalt Drill Bit Set, M35 HSS
A 15-piece M35 cobalt set from 1/16 inch to 3/8 inch, with 5% cobalt stated, a 135 degree split point, gold oxide finish and an indexed storage case.
Pros
- M35 cobalt with 5% cobalt stated
- 135 degree split point stated to center on its own and clear chips faster
- Gold oxide finish with round straight shanks and a fully ground spiral groove
- Indexed storage case stated, with a 30-day money back term stated
Cons
- Size range tops out at 3/8 inch, narrower than the 1/2 inch range here
- No safety standard is stated
- Round straight shanks, without the three-flat grip stated for Bosch
- 15 pieces, a smaller piece count than the larger sets here

DEWALT Cobalt Alloy Steel Drill Bit Set with Pilot
A 14-piece cobalt alloy steel set with a pilot point, a clear lid, a clip latch and a connectable storage system for wood, metal or I-beams.
Pros
- Cobalt alloy steel stated, with a pilot point
- Clear lid stated for seeing contents at a glance
- Clip latch stated for closing, with a connectable storage system
- Small bulk storage size stated to fit inside Small and Medium ToughCase+ units
Cons
- No cobalt grade or percentage is stated
- No full size range is stated
- No concrete warranty term is stated
- No safety standard is stated
Other welders and gear to compare
NordWolf 5-Piece M35 Cobalt Stubby Drill Bit SetCheck price on Amazon
IRWIN Drill Bit SetCheck price on Amazon
Cobalt Drill Bit SetCheck price on Amazon
SALI Cobalt Drill Bit SetCheck price on Amazon
NordWolf 14-Piece M35 Cobalt Drill Bit SetCheck price on Amazon
How the best cobalt drill bit set picks compare
| Model | Gear Score | Cobalt grade | Pieces | Size range | Point | Case | Warranty |
|---|---|---|---|---|---|---|---|
| Bosch CO21B M42 Cobalt Set | 9.7/10 | M42, 8% cobalt | 21 | Not stated | Split point | Included case | Not stated |
| MACXCOIP M35 Cobalt Set, 29 Pieces | 9.7/10 | M35 | 29 | 1/16 inch to 1/2 inch | 135 degree point | Index storage case | Not stated |
| GMTOOLS M35 Cobalt Set, 15 Pieces | 9.6/10 | M35, 5% cobalt | 15 | 1/16 inch to 3/8 inch | 135 degree split point | Indexed storage case | 30-day money back |
| DEWALT DWA1240 Cobalt Set, 14 Pieces | 9.5/10 | Cobalt alloy | 14 | Not stated | Pilot point | Connectable storage | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 29 October 2026. Not stated means the listing does not name that figure.
Buying guide: best cobalt drill bit set
Cobalt grade
Cobalt grade is stated for some sets and not stated for the rest. Bosch states M42 cobalt with 8% cobalt, while MACXCOIP and GMTOOLS state M35 cobalt, and GMTOOLS adds 5% cobalt. DEWALT DWA1240 states cobalt alloy steel without a grade or a percentage. Grade alone does not decide a pick, but a set that does not state cobalt cannot be scored as a cobalt set.
Point design
Point design decides whether a bit starts on the mark. MACXCOIP and GMTOOLS state a 135 degree point, with GMTOOLS calling it a split point that centers on its own and clears chips faster, and MACXCOIP stating self-centering to prevent walk-off. Bosch states split points on bits 1/8 inch and larger, with no degree stated. DEWALT DWA1240 states a pilot point without a degree. A split or pilot point matters most on hard, smooth metal where a plain point can skate.
Size range and piece count
Size range and piece count pull in different directions. MACXCOIP covers 1/16 inch to 1/2 inch in 29 pieces, the widest range here, while GMTOOLS covers 1/16 inch to 3/8 inch in 15 pieces. Bosch and DEWALT DWA1240 state piece counts of 21 and 14 without a full size range. A wide range suits varied shop work, while a smaller set suits a bench where the common sizes do most of the work.
Shank and case
Shank and case decide how a set holds up in daily shop use. Bosch states a three-flat shank on bits 3/16 inch and larger for better bit grip, while GMTOOLS states round straight shanks. Cases are stated for Bosch, MACXCOIP, GMTOOLS and DEWALT DWA1240, with MACXCOIP and GMTOOLS using an index so each size has a marked slot, and DEWALT DWA1240 using a clear lid, a clip latch and a connectable storage system.
Before You Strike an Arc
- Check the shank against the chuck: Bosch states a three-flat shank on bits 3/16 inch and larger for better grip.
- Check the size index in the case before starting, so the size needed is in its marked slot and not loose in a drawer.
- Check that the bit material matches the metal on the bench: M42 and M35 cobalt are stated for stainless steel, cast iron and hardened metal.
- Check the case on arrival: DEWALT DWA1240 states a clear lid for seeing contents at a glance and a clip latch for closing.
FAQ for welders
How do I use a cobalt drill bit set?
Pick the size for the hole, seat the bit in the chuck, and let the split or pilot point start on the mark before leaning into the cut. The listings here state split points that center on their own and twist designs that clear chips, so a steady feed and a clear chip path matter more than force. Keep the bit in its indexed case between jobs, since a dull edge and a lost size both slow the next repair.
How does a drill bit work?
A twist bit cuts with its point and lifts chips out through its flutes as it turns. The listings here state 135 degree points, split points and twist designs, with MACXCOIP stating self-centering to prevent walk-off and faster chip removal, and GMTOOLS stating a point that clears chips and particles faster. Cobalt steel is stated for cutting stainless steel, cast iron and hardened metal, where plain high speed steel dulls sooner.
How do I clean drill bits?
No listing here states a cleaning method, so no cleaning product or step is claimed from a listing. Chips and dust can be brushed from the flutes and the case after use, and bits go back into their indexed slots so edges do not knock together. A bit with a chipped point or a bent shank belongs out of the set, since it will not start true.
How do I remove a broken drill bit?
No listing here states a removal method, so the listings give no removal tool to recommend. Stop as soon as a bit breaks, let the work cool, and check how much of the bit stands proud of the hole before choosing a grip or a drill-out approach. A bit broken flush with the surface is a harder job than a bit with a shank to grip, and forcing another bit into the same hole risks more breakage.
What size range do these sets cover?
MACXCOIP covers 1/16 inch to 1/2 inch, and GMTOOLS covers 1/16 inch to 3/8 inch, both stated in their listings. Bosch states 21 pieces and DEWALT DWA1240 states 14 pieces without a full size range. A set with a stated range lets the bench match the hole size before ordering, while a set without a stated range leaves that check to the case index on arrival.
Related: black oxide vs cobalt drill bits, titanium vs cobalt drill bits, cobalt vs HSS drill bits for steel, best drill bits for steel, and the metal fab tools hub.
Scoring, line by line
Each set is scored on performance, build, value, safety listing and warranty. Performance follows stated cobalt grade, point design and size range; build follows stated material, shank and case; value follows piece count against the stated specs. No listing here states a safety standard, so every set scores zero on safety, and only the GMTOOLS set states a concrete term, so only that set scores on warranty. The ranking comes from the other factors, with the high speed steel set scored low for a cobalt roundup because its listing does not state cobalt at all.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Bosch CO21B M42 Cobalt Set | 9.7 | 32 | 22 | 21 | n/a | 0 |
| MACXCOIP M35 Cobalt Set, 29 Pieces | 9.7 | 30 | 21 | 22 | n/a | 0 |
| GMTOOLS M35 Cobalt Set, 15 Pieces | 9.6 | 28 | 20 | 19 | n/a | 2 |
| DEWALT DWA1240 Cobalt Set, 14 Pieces | 9.5 | 27 | 20 | 19 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




