Best Drill Bits for Steel (2026): 5 M35 Sets
Five M35 cobalt drill bit sets compared by piece count, size range, finish, shank and warranty for drilling steel.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Top PickGMTOOLS 13-Pc Cobalt9.6/10View on Amazon - 2
Bulk PickSinyeenglon 99-Pc9.6/10View on Amazon - 3
Range PickCaRoller 29-Pc9.6/10View on Amazon - 4
Refill PickDrill Hulk 12-Pc9.6/10View on Amazon
Drilling steel wants M35 cobalt, not plain high-speed steel. The best drill bits for steel in this comparison are all M35 cobalt, with 135-degree split points and self-centering tips, made for stainless steel, cast iron and hardened metal. Five sets compared by what their listings state: piece counts from 12 to 99, size ranges, finishes and warranty terms.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Top Pick GMTOOLS 13-Pc Cobalt: 13 M35 bits 1/16 to 1/4 in, titanium finish, 30-day money back. Check price on Amazon
- Bulk Pick Sinyeenglon 99-Pc: 99 M35 bits in many sizes, hardness up to 67 stated, indexed case. Check price on Amazon
- Range Pick CaRoller 29-Pc: 29 M35 bits 1/16 to 1/2 in, zirconium nitride, belt-clip holder. Check price on Amazon
- Refill Pick Drill Hulk 12-Pc: 12 resharpenable 1/4 in M35 bits with 3-flat shanks. Check price on Amazon
The machines

GMTOOLS 13Pcs Cobalt Drill Bits Set
Thirteen M35 cobalt bits from 1/16 to 1/4 in with 135-degree split points, titanium finish and a storage case, backed by a stated 30-day money back term.
Pros
- 13 pieces from 1/16 to 1/4 in in a storage case
- M35 with 5 percent cobalt and 135-degree split points
- Titanium finish over stated 6542 high speed steel
- 30-day money back stated, the only warranty here
Cons
- Tops out at 1/4 in, no larger sizes
- No resharpening claim is stated
- Finish thickness is not stated

Cobalt Drill Bits Set for Hardened Metal
Ninety-nine M35 cobalt bits from 1/16 to 3/8 in from 1/16 to 3/8 in, with stated hardness up to 67 and an indexed plastic case.
Pros
- 99 pieces with spares of the small sizes
- sizes from 1/16 to 3/8 in
- Hardness up to 67 stated, with 12x life claim vs HSS
- Indexed case with sizes printed under the lid
Cons
- No warranty term is stated
- No single-bit detail beyond the counts
- Bulk set: duplicates you may never use

CaRoller Cobalt Drill Bit Set 29-Piece M35 Cobalt
Twenty-nine M35 cobalt bits from 1/16 to 1/2 in with a zirconium nitride finish and a cup-type belt-clip holder.
Pros
- 29 pieces from 1/16 to 1/2 in, the widest range here
- Zirconium nitride finish with amber coating
- Cup-type holder with belt clip for portability
- 135-degree split points, self-centering
Cons
- No warranty term is stated
- One bit per size: no spares
- No resharpening claim is stated

1/4-Inch Cobalt Steel M35 Jobber Length Twist
Twelve 1/4 in M35 cobalt jobber bits with 3-flat shanks and 135-degree split points, stated resharpenable, in a case.
Pros
- 12 pieces of the shop-standard 1/4 in size
- 3-flat shank for chuck grip
- Stated resharpenable without damaging the edge
- Gold oxide finish in a case
Cons
- One size only: 1/4 in
- No warranty term is stated
- No size range for varied work

Cobalt Drill Bit Set - 15Pcs M35 HSS Twist Drill
Fifteen M35 cobalt bits from 1/16 to 3/8 in with 135-degree split points and an index storage case.
Pros
- 15 pieces from 1/16 to 3/8 in
- M35 with 5 percent cobalt stated
- Index storage case with size index
- Gold oxide finish
Cons
- No warranty term is stated
- One bit per large size: no spares
- No resharpening claim is stated
Other welders and gear to compare
Metric M42 8% Cobalt Twist Drill Bits Set for Stainless SteelCheck price on Amazon
8PCS Cobalt Drill Bits Set HSSCO M35 S&D Twist Drill Bits forCheck price on Amazon
ZELCAN Magnetic Drill Press with 6 Drill BitsCheck price on Amazon
ZELCAN Mag Drill Press with 6 Drill BitsCheck price on Amazon
Spec sheet comparison
| Set | Gear Score | Pieces | Range | Point | Finish | Warranty |
|---|---|---|---|---|---|---|
| GMTOOLS 13-Pc Cobalt | 9.6/10 | 13 | 1/16 to 1/4 in | 135 deg split | Titanium | 30-day money back |
| Sinyeenglon 99-Pc | 9.6/10 | 99 | 1/16 to 3/8 in | 135 deg split | Gold oxide | Not stated |
| CaRoller 29-Pc | 9.6/10 | 29 | 1/16 to 1/2 in | 135 deg split | Zirconium nitride | Not stated |
| Drill Hulk 12-Pc | 9.6/10 | 12 | 1/4 in | 135 deg split | Gold oxide | Not stated |
| SEDIANAS 15-Pc | 9.5/10 | 15 | 1/16 to 3/8 in | 135 deg split | Gold oxide | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 20 October 2026. “Not stated” means the listing does not give the figure.
What the listings tell you
We read five M35 cobalt listings. All five state M35 cobalt and 135-degree split points, and three of them state 5 percent cobalt: the Drill Hulk, GMTOOLS and SEDIANAS. Piece counts run from 12 to 99, with size ranges from 1/16 in to 1/2 in across the sets. Finishes include gold oxide, titanium and zirconium nitride. The Sinyeenglon states hardness up to 67 and up to 12 times the life of the average HSS titanium coated bit, as the maker’s claim. One listing states a warranty term: 30-day money back on the GMTOOLS.
Buying guide: best drill bits for steel
Why M35 cobalt
Every listing here names M35 cobalt; the Drill Hulk, GMTOOLS and SEDIANAS state 5 percent cobalt, and the claims are consistent: higher heat resistance from cobalt’s red hardness, harder than plain HSS, and uniform hardness through the material so the bits can be repeatedly sharpened, per the Drill Hulk listing. The Sinyeenglon states hardness up to 67 and up to 12 times the life of the average HSS titanium coated bit. Treat those as the maker’s claims; what the listings agree on is that M35 is the steel-grade answer for stainless, cast iron and hardened metal.
Piece counts and size ranges
The Drill Hulk is 12 pieces of one size: 1/4 in, a refill pack for the bit you burn through. The GMTOOLS is 13 pieces from 1/16 to 1/4 in. The SEDIANAS is 15 pieces from 1/16 to 3/8 in. The CaRoller is 29 pieces from 1/16 to 1/2 in. The Sinyeenglon is 99 pieces from 1/16 to 3/8 in from 1/16 to 3/8 in, with spares of the small sizes that break most. Buy the range you actually drill: a full 1/16 to 1/2 in set covers sheet metal to structural drilling; a 12-pack of 1/4 in covers the one size a shop goes through.
Point angle and shanks
All five state 135-degree split points with self-centering tips that reduce walking. Shanks differ: the Drill Hulk states a 3-flat shank for grip in the chuck; the GMTOOLS states a universal round shank; the CaRoller and SEDIANAS state round straight shanks; the Sinyeenglon states round shank. The 3-flat shank resists slipping in a hand drill; round shanks suit drill presses.
Finishes
The Drill Hulk, Sinyeenglon and SEDIANAS state gold oxide finish. The GMTOOLS states a titanium finish over what it calls 6542 high speed steel, harder than 4241 HSS used in other sets, per its listing. The CaRoller states a zirconium nitride finish with an amber coating. Finishes are stated as wear resistance; none of the listings gives a coating thickness.
Storage
The GMTOOLS, SEDIANAS and Sinyeenglon state index storage cases with sizes marked. The CaRoller states a cup-type round holder with a built-in clip that attaches to a tool belt. The Drill Hulk states a case for its 12 bits. For a 99-piece set, the indexed box is not a luxury: it is how you find the right bit.
Warranty
Only the GMTOOLS states a warranty term: 30-day money back with a 100 percent satisfaction guarantee. The other four state no warranty term. On consumable bits that is normal; the warranty covers the purchase, not the drilling.
Stated use notices
The Sinyeenglon is the only listing with use guidance: drill vertically to the workpiece, control low speed from 200 to 1000 rpm, and use cutting fluid to stay cool and make the bit last longer. The other four state no speed or fluid guidance. The notices are worth following whoever makes your bits: cobalt cuts hot steel, and heat is what kills the edge.
Speeds and cooling
Only the Sinyeenglon states speeds: 200 to 1000 rpm, with cutting fluid. The other four state no rpm range. As a general rule from the one stated notice, keep the speed low and the cutting fluid flowing; the M35 heat resistance the listings claim does not make dry drilling at high speed a good idea. The Drill Hulk’s resharpening claim assumes you have not cooked the temper out of the bit.
Contradictions to note
Three listings disagree with themselves. The GMTOOLS spec table says High Carbon Steel while its bullets say M35 with 5 percent cobalt. The SEDIANAS spec table says High Speed Steel (HSS) while its bullets say M35 with 5 percent cobalt. The Sinyeenglon spec table says cutting diameter 1.59 mm while its bullets list sizes to 3/8 in. The CaRoller spec table says 3 flutes and the Drill Hulk says 1 flute on twist bits the bullets describe as fully ground. In each case the bullets win, per the site rules.
When a set beats single bits
Buy the set when you drill varied sizes: the 29-piece CaRoller covers 1/16 to 1/2 in in one purchase, and the 99-piece Sinyeenglon covers the breakage problem with multiples of the small sizes. Buy single-size packs when you know the size: the Drill Hulk 12-pack of 1/4 in is for the bit a shop goes through weekly. A set with one bit per size, like the SEDIANAS 15-piece, leaves you reordering the moment one bit snaps.
Materials each set states
All five state stainless steel, cast iron and hardened metal. The GMTOOLS adds plastic and wood to its surface list. The Sinyeenglon adds zinc alloy, titanium, hard sheet, mild steel tube, flat bar and aluminum. The CaRoller adds high temperature alloy, titanium alloy, hard plastics and wood. The SEDIANAS adds high temperature alloy, titanium alloy, hard plastics and woods. For plain mild steel any of the five states suitability; for stainless and hardened stock, the M35 cobalt grade is the stated answer across the board.
What “5 percent cobalt” buys you
The listings are consistent on the mechanism: cobalt raises red hardness, the hardness the bit keeps when hot, which the Drill Hulk, GMTOOLS and SEDIANAS all describe. The GMTOOLS contrasts its 6542 steel with 4241 HSS in other sets. The Drill Hulk adds that uniform hardness lets the bit be resharpened repeatedly without damaging the cutting edge. None of the listings states a coating on the cobalt itself; the gold oxide, titanium and zirconium nitride finishes are surface treatments, not the grade.
FAQ for welders
What does M35 mean?
M35 is the cobalt high-speed steel grade named by all five listings; three of them state 5 percent cobalt: the Drill Hulk, GMTOOLS and SEDIANAS. The listings claim higher heat resistance and hardness than plain HSS, with uniform hardness through the bit so it can be resharpened.
How many bits do I need?
Match the set to the work: 12 pieces of 1/4 in for refills, 13 to 29 pieces for a general 1/16 to 1/2 in range, 99 pieces for a shop that wants spares of every size. The Sinyeenglon includes multiples of the small sizes that break most.
What is a 135-degree split point?
The point style all five listings state: a self-centering tip that reduces walking when the bit starts. Every set here has it, so it is a baseline, not a differentiator.
Do any have a warranty?
Only the GMTOOLS: the listing states 30-day money back. The other four state no warranty term.
Can these drill stainless steel?
All five listings state suitability for stainless steel, cast iron and hardened metal. The Sinyeenglon adds zinc alloy, titanium and aluminum to its stated list.
Related: the best drill press for metalworking, the best angle grinder for beveling steel and the best cut-off wheel for steel.
Scoring, line by line
Each set is scored on performance, build, value, safety and warranty. Safety scoring follows the stated certifications; no listing here states a safety standard, so safety scores are zero. Only the GMTOOLS listing states a warranty term: 30-day money back.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| GMTOOLS 13-Pc Cobalt | 9.6 | 29 | 20 | 21 | n/a | 2 |
| Sinyeenglon 99-Pc | 9.6 | 30 | 20 | 21 | n/a | 0 |
| CaRoller 29-Pc | 9.6 | 29 | 20 | 20 | n/a | 0 |
| Drill Hulk 12-Pc | 9.6 | 28 | 20 | 20 | n/a | 0 |
| SEDIANAS 15-Pc | 9.5 | 28 | 19 | 20 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




