Best Screw Extractor Set with Left Hand Drill Bits (2026)
Five screw extractor sets with left hand drill bits, from 10 to 55 pieces, compared on extractor sizes, drill bit sizes, steel, case and the warranty each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallIRWIN 111199.6/10View on Amazon - 2
Largest KitTHINKWORK W60959.5/10View on Amazon - 3
Tap Wrench IncludedGRENPRO 15-Piece9.4/10View on Amazon - 4
Titanium-Coated Bitscoobeast 11-Piece9.4/10View on Amazon
A sheared bolt head on a rusted bracket can stop a repair cold, and a drilled-out stub with no grip left is worse. The best screw extractor set with left hand drill bits gives you a way back: a reverse-flute bit that bites as it turns counter-clockwise, and a spiral extractor that wedges tighter as resistance rises. This guide compares the kits on what each listing states: extractor sizes, drill bit sizes, steel, case and warranty, so you can match the kit to the fasteners you face.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall IRWIN 11119: The only stated warranty here, limited lifetime, plus a metal index case and extractor and drill bit sizes etched on each tool. Check price on Amazon
- Largest Kit THINKWORK W6095: 55 pieces with a drill bit guide and long extractor pins for hard-to-reach fasteners, in a heavy-duty blow-molded case. Check price on Amazon
- Tap Wrench Included GRENPRO 15-Piece: A 15-piece kit with 35# Cr-Mo extractors, 6542 HSS left-hand drill bits and a tap wrench for controlled manual turning. Check price on Amazon
- Titanium-Coated Bits coobeast 11-Piece: 11 pieces with 135° left-hand bits, a quick-change adapter and a palm-sized case for carry. Check price on Amazon
The machines

Irwin Tools IRWIN Screw Extractor/ Drill Bit Set
A 10-piece set with 5 spiral flute extractors and 5 matched left-hand drill bits, etched sizes, a metal index case and the only stated warranty here.
Pros
- Limited lifetime warranty, the only stated warranty in this guide
- Extractor and drill bit sizes etched on each tool
- 5 spiral flute extractors, EX-1 to EX-5, with 5 matched drill bits
- Metal index case keeps the 10 pieces in order
Cons
- No steel grade stated for the extractors or the drill bits
- 10 pieces covers fewer fastener sizes than the 55-piece kit here
- Largest drill bit is 19/64 inch, so larger broken bolts need a bigger set
- No tap wrench or quick-change adapter in the listing

55-Piece Easy Out Screw Extractor Set with Broken
A 55-piece set with a drill bit guide and long extractor pins for hard-to-reach fasteners, in a heavy-duty blow-molded case.
Pros
- 55 pieces, the largest kit in this guide
- Drill bit guide and long extractor pins for hard-to-reach fasteners
- Laser-etched markings stay readable in low light
- Heavy-duty plastic blow-molded carrying case keeps the set organized
Cons
- No warranty term in the listing
- Extractor and drill bit sizes not stated
- No steel grade beyond Cr-Mo steel and HSS in the title
- At 1.0 lb it is the heaviest stated weight here

GRENPRO 15-Piece Screw Extractor Set with Left
A 15-piece kit with 35# Cr-Mo spiral extractors, 6542 HSS left-hand drill bits and a tap wrench for controlled manual turning.
Pros
- Tap wrench included for controlled manual turning
- 35# Cr-Mo extractors with a reverse spiral design
- 6542 HSS left-hand drill bits for a centered removal hole
- Covers stripped, broken and rusted screws, bolts and studs
Cons
- No warranty term in the listing
- Extractor and drill bit sizes not stated
- No case stated in the listing
- 15 pieces covers fewer fastener sizes than the 55-piece kit here

UYECOVE 14 Pieces Screw Extractor Set Left Hand
A 14-piece set with 35# Cr-Mo extractors and 6542 HSS left-hand bits, in working sizes from 1/8 to 19/64 inch.
Pros
- Working sizes from 1/8 to 19/64 inch, stated in the listing
- 35# Cr-Mo extractors and 6542 HSS steel bits
- 10+4 pieces covers extractors 1# to 5# with matched bits
- Plastic box for storage and carry
Cons
- No warranty term in the listing
- No tap wrench or adapter in the listing
- Quality help is a replace-or-refund promise, not a stated warranty term
- 14 pieces covers fewer fastener sizes than the 55-piece kit here

11 Pcs Screw Extractor Set,Left Hand Drill
An 11-piece kit with 5 titanium-coated left-hand bits, 5 spiral extractors and a quick-change adapter on a unified 1/4 shank.
Pros
- Quick-change adapter connects bits and extractors to hand or electric tools
- 135° bit angle cuts in with less axial resistance
- Titanium-coated HSS bits for hardness and wear resistance
- Palm-sized storage box is easy to carry
Cons
- No warranty term in the listing
- Extractor and drill bit sizes not stated
- 5 bits and 5 extractors cover fewer sizes than the larger kits here
- No tap wrench in the listing
Other welders and gear to compare
NEIKO 01925A Screw-Extractor And Left-Hand Drill-Bit SetCheck price on Amazon
NEIKO 10038A Left-Hand Drill-Bit SetCheck price on Amazon
NEIKO 10037A Left-Hand Drill-Bit SetCheck price on Amazon
24 Piece Left Hand Drill Bits Set and Easy Out ScrewCheck price on Amazon
19 Piece Easy Out Screw Extractor Set and Left Hand DrillCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Pieces | Extractors | Drill bits | Material | Case | Warranty |
|---|---|---|---|---|---|---|---|
| IRWIN 11119 | 9.6/10 | 10 | EX-1 to EX-5 | 5/64 to 19/64 in | Not stated | Metal index case | Limited lifetime |
| THINKWORK W6095 | 9.5/10 | 55 | Not stated | Not stated | Cr-Mo steel and HSS | Blow-molded plastic case | Not stated |
| GRENPRO 15-Piece | 9.4/10 | 15 | Not stated | 6542 HSS left-hand | 35# Cr-Mo and 6542 HSS | Not stated | Not stated |
| UYECOVE 14-Piece | 9.4/10 | 14 | 1# to 5# | 1/8 to 19/64 in | 35# Cr-Mo and 6542 HSS | Plastic box | Not stated |
| coobeast 11-Piece | 9.4/10 | 11 | 5 spiral extractors | 5 left-hand bits | Cr-Mo steel, HSS titanium coated | Palm-sized storage box | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 11 November 2026.
Buying guide: the best screw extractor set with left hand drill bits for seized fasteners
Extractor sizes and drill bit sizes
Match the extractor to the fastener and the bit to the extractor. The IRWIN set lists both sides of the match: extractors EX-1 to EX-5 with drill bits in 5/64, 7/64, 5/32, 1/4 and 19/64 inch, etched on each tool. The UYECOVE set lists extractors 1# to 5# with working sizes 19/64, 1/4, 3/16, 5/32 and 1/8 inch. The THINKWORK, GRENPRO and coobeast listings state no sizes, so check the listing before you buy if you need a match for a given fastener.
Steel: Cr-Mo and HSS
Extractors in this guide are chromium-molybdenum steel where the listing states it: 35# Cr-Mo on the UYECOVE and GRENPRO sets, and Cr-Mo steel on the THINKWORK and coobeast sets. Drill bits are high-speed steel where stated: 6542 HSS on the UYECOVE and GRENPRO sets, HSS with a titanium coating on the coobeast set, and HSS on the THINKWORK set. The IRWIN listing states no steel grade, so its build score rests on the etched sizes, the metal case and the warranty instead.
Left-hand flutes and spiral grip
Left-hand bits turn counter-clockwise, so the bit can spin a broken bolt out while it drills. Every set here states spiral flutes that embed deeper and grip harder as resistance rises. The coobeast set adds a 135° bit angle that cuts in with less axial resistance, and its flute design runs an impact wrench in reverse.
Case, adapter and tap wrench
The IRWIN set ships in a metal index case, the THINKWORK set in a heavy-duty plastic blow-molded carrying case, the UYECOVE set in a plastic box and the coobeast set in a palm-sized storage box. The coobeast adapter is the only quick-change adapter here, connecting bits and extractors to hand tools or electric tools through magnetic suction on a unified 1/4 size shank. The GRENPRO set is the only one here with a tap wrench, for steady manual turning.
Use as directed. Wear eye protection when drilling, since a broken bit or extractor can throw sharp fragments. Keep hands clear of the bit, clamp the work before you drill, and stop if the extractor starts to twist instead of turning the fastener.
Before You Strike an Arc
- Use a drill that runs in reverse for the left-hand bits, and match the bit to the extractor size etched on the tool.
- Check the case on arrival: the IRWIN metal index case, the THINKWORK blow-molded case, the UYECOVE plastic box and the coobeast palm-sized box each hold a different piece count.
- Confirm the coobeast 1/4 size shank fits your drill and adapter before you start.
- The GRENPRO tap wrench turns extractors by hand for controlled torque on stubborn fasteners.
- Keep the THINKWORK drill bit guide with the kit; it centers the bit on hard-to-reach fasteners.
FAQ for welders
What size screw extractor do I need?
Match the extractor to the broken fastener, then match the drill bit to the extractor. The IRWIN set pairs extractors EX-1 to EX-5 with drill bits in 5/64, 7/64, 5/32, 1/4 and 19/64 inch, and the UYECOVE set pairs extractors 1# to 5# with working sizes from 1/8 to 19/64 inch. If a listing states no sizes, measure the fastener and check the listing before you buy.
Do left-hand drill bits really remove a broken bolt?
A left-hand bit turns counter-clockwise, so it can spin a broken bolt out while it drills the hole. The spiral flutes on these sets embed deeper and grip harder as resistance rises, which is how the extractor takes over once the hole is drilled. If the bolt stays stuck, the extractor wedges tighter as you turn it counter-clockwise.
What drill do I need for left-hand drill bits?
You need a drill that runs in reverse, since left-hand bits cut counter-clockwise. The IRWIN listing states a corded electric power source type, and the coobeast set connects through a quick-change adapter to hand tools or electric tools. Check that your drill runs in reverse before you start.
What is the difference between Cr-Mo extractors and HSS drill bits?
Extractors in this guide are chromium-molybdenum steel, stated as 35# Cr-Mo on the UYECOVE and GRENPRO sets, and the drill bits are high-speed steel, stated as 6542 HSS on those same sets. The extractor wedges into the drilled hole and turns the fastener out, while the left-hand bit drills the hole. The coobeast set adds a titanium coating on its HSS bits for hardness and wear resistance.
How do I pick between a 10-piece set and a 55-piece set?
The 10-piece IRWIN set covers extractors EX-1 to EX-5 with matched drill bits, a metal index case and a limited lifetime warranty. The 55-piece THINKWORK set adds a drill bit guide, long extractor pins for hard-to-reach fasteners and a blow-molded case, but states no sizes or warranty. The 15-piece GRENPRO set sits between them and adds a tap wrench, while the 14-piece UYECOVE and 11-piece coobeast sets suit smaller kits with stated sizes or an adapter.
Related: metal fab tools, best screw extractor set, screw extractor vs bolt extractor, best cobalt drill bit set and best bolt extractor set.
Scoring, line by line
Each set is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the method page. Screw extractor sets carry no electrical safety listing to state, so every set here scores zero on that criterion, and the ranking comes from the rest.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| IRWIN 11119 | 9.6 | 30 | 21 | 21 | 0 | 3 |
| THINKWORK W6095 | 9.5 | 29 | 21 | 21 | 0 | 0 |
| GRENPRO 15-Piece | 9.4 | 28 | 20 | 20 | 0 | 0 |
| UYECOVE 14-Piece | 9.4 | 27 | 20 | 20 | 0 | 0 |
| coobeast 11-Piece | 9.4 | 26 | 19 | 20 | 0 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.




