Best Bolt Extractor Set (2026): 5 Sets for Stripped, Rusted and Broken Bolts
Five bolt extractor sets, from a 6-piece HSS set to 46-piece Cr-Mo kits, compared on size range, steel, grip design and the warranty each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best Overalltoolant 46-Piece Impact9.5/10View on Amazon - 2
Most Complete Runner-UpWYBENZ 46-Piece9.5/10View on Amazon - 3
Best CaseVEVOR 29-Piece9.4/10View on Amazon - 4
Best for Lug NutsDPTOOL 22-Piece9.4/10View on Amazon
A bolt head rounds off at the worst moment, usually on a rusted bracket that has to come off before the real job starts. The wrench slips, the corners go smooth, and the fastener sits there while the work waits. A best bolt extractor set turns that stuck fastener into a short job: the extractor bites into the damaged head or shank and backs it out in reverse. This guide compares the sets on what each listing states: piece count, size range, steel, grip design, drive fit and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall toolant 46-Piece Impact: 46 pieces, Cr-Mo steel, adapters and a knockout pin, and the only stated warranty here, one year. Check price on Amazon
- Most Complete Runner-Up WYBENZ 46-Piece: 46 pieces with dual-head drill and extract screw extractors, lug nut extractors from 17mm to 22mm, and an orange case. Check price on Amazon
- Best Case VEVOR 29-Piece: Cr-Mo set from 6mm to 3/4 inch in a waterproof case, with laser-engraved sizes and a hex top. Check price on Amazon
- Best for Lug Nuts DPTOOL 22-Piece: 22 pieces with 1/2 and 3/8 inch square drive sockets and spiral grip teeth for stripped lug nuts. Check price on Amazon
The machines

toolant 46-Piece Impact Bolt Extractor Set
A 46-piece impact set with bolt extractors, multi-spline screw extractors, hand extractors and deep bolt extractors, plus adapters and a knockout pin, and the only stated warranty here.
Pros
- 46 pieces covering bolt extractors, multi-spline screw extractors, hand extractors and deep bolt extractors
- Cr-Mo steel with phosphating and blackening for corrosion resistance
- Includes 3/8 to 1/2 inch adapter, 3/8 inch hex adapter and a knockout pin
- One year warranty stated in the listing, the only stated term here
Cons
- No case is mentioned in the listing
- No weight is stated
- No drive size is stated for the main extractors
- No hardness figure is stated

46Pcs Screw Extractor Set & Impact Lug Nut
A 46-piece set that pairs bolt extractors with multi-spline screw extractors, lug nut extractors and a dual-head drill and extract design, in an orange case.
Pros
- 46 pieces across bolt, multi-spline, lug nut and stripped screw extractors
- Dual-head screw extractors drill and extract without a tool change
- Forged Cr-Mo steel with a phosphated black finish for rust resistance
- Orange case keeps the set organized, with adapters and a knockout pin included
Cons
- No warranty term is stated
- No hardness figure is stated for the Cr-Mo extractors
- No weight is stated
- Lug nut extractors cover 17mm to 22mm only

VEVOR Bolt Extractor Set, 29-Piece Set
A Cr-Mo set in a waterproof case, sized from 6mm to 3/4 inch, with laser-engraved sizes and a hex top to stop slipping.
Pros
- Cr-Mo steel with a sandblasted surface for wear and rust resistance
- Laser-engraved sizes for quick selection
- Hexagonal top design keeps wrenches and sockets from slipping off
- Waterproof PP case included; weighs 1.1 lb
Cons
- No warranty term is stated
- No hardness figure is stated
- Adapters fit 3/8 and 1/4 inch tools only

DPTOOL Lug Nut Extractor Set, Bolt Nut Extractor
A 22-piece impact lug nut and bolt extractor set with 1/2 and 3/8 inch square drive sockets, spiral grip teeth and a storage case.
Pros
- 22 pieces with both 1/2 and 3/8 inch square drive sockets
- Internal threads and reverse spiral grooves grip tighter as you turn
- Chrome molybdenum steel, hardened and heat-treated with a black oxide coating
- Sockets engraved with imperial dimensions; case included with 2 solid iron bars
Cons
- Not intended for deep applications, per the listing
- No warranty term is stated
- No hardness figure is stated
- No weight is stated

Damaged Screw Extractor Set,Christmas Stocking
A compact 6-piece HSS set for screws and bolts from 3 to 12mm, with a stated hardness of 63 to 65HRC.
Pros
- HSS 4341 steel with a stated hardness of 63 to 65HRC
- Covers screws and bolts from 3 to 12mm
- Works with any drill, per the listing
- Smallest set here, easy to store
Cons
- No case is mentioned
- No warranty term is stated
- Six pieces, the fewest here, so size coverage is narrow
Other welders and gear to compare
NEIKO 01925A Screw-Extractor And Left-Hand Drill-Bit SetCheck price on Amazon
IRWIN Bolt Extractor Set for Deep Well BoltsCheck price on Amazon
19 Piece Easy Out Screw Extractor Set and Left Hand DrillCheck price on Amazon
BOSCH BSPE6D 12-Piece Assorted Set Spiral Flute High-CarbonCheck price on Amazon
LOPMOU Damaged Screw Extractor SetCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Pieces | Size range | Steel | Drive | Case | Warranty |
|---|---|---|---|---|---|---|---|
| toolant 46-Piece Impact | 9.5/10 | 46 | 1/4 to 3/4 in bolt extractors | Cr-Mo | 3/8 to 1/2 in adapter | Not stated | 1 year |
| WYBENZ 46-Piece | 9.5/10 | 46 | 1/4 to 3/4 in bolt extractors | Cr-Mo, 4341 HSS | 3/8 to 1/2 in adapter | Orange case | None stated |
| VEVOR 29-Piece | 9.4/10 | 29 | 6mm to 3/4 in | Cr-Mo | 3/8 and 1/4 in | Waterproof PP case | None stated |
| DPTOOL 22-Piece | 9.4/10 | 22 | 1/4 in to 27mm | Chrome molybdenum | 1/2 and 3/8 in | Case included | None stated |
| THOSAF 6-Piece | 9.4/10 | 6 | 3 to 12mm | HSS 4341 | Any drill | Not stated | None stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 11 November 2026.
Buying guide: what matters in the best bolt extractor set
Piece count and size range
Piece count sets the range of fasteners a set can cover. The THOSAF set has 6 pieces for screws and bolts from 3 to 12mm, and the DPTOOL set has 22 pieces, with 3/8 inch drive sockets from 1/4 inch to 13mm and 1/2 inch drive sockets from 14mm to 27mm. The VEVOR set covers 6mm to 3/4 inch. Both 46-piece sets cover the widest range: WYBENZ bolt extractors run 1/4 inch to 3/4 inch with lug nut extractors from 17mm to 22mm, and toolant adds multi-spline screw extractors from 1/8 inch to 1/2 inch, hand extractors numbered 1 to 6, and deep bolt extractors in 17, 19, 21 and 22.
Steel and hardness
Four sets here use chrome molybdenum steel: DPTOOL, VEVOR, toolant and WYBENZ. The THOSAF set uses HSS 4341 steel and states a hardness of 63 to 65HRC, the only hardness figure in this guide. WYBENZ states that its 6 screw extractors use 4341 HSS while its Phillips bits use S2 steel. DPTOOL states hardening and heat treatment with a black oxide coating, VEVOR states a sandblasted surface, and toolant and WYBENZ state phosphating and blackening.
Grip design
Every extractor here grips by biting into the damaged fastener as it turns counterclockwise. DPTOOL uses internal threads and reverse spiral grooves, and states that the grip tightens the more you turn. VEVOR uses a reverse spiral with a hexagonal top so wrenches and sockets do not slip off. WYBENZ adds a dual-head screw extractor that drills the pilot hole with one end and extracts with the other, so there is no tool change in the middle of the job.
Drive fit
Check the drive before you buy, since a set that does not fit your tools is dead weight in the box. DPTOOL sockets take 1/2 inch and 3/8 inch square drive wrenches. VEVOR adapters fit 3/8 inch and 1/4 inch manual or power tools. toolant and WYBENZ include a 3/8 to 1/2 inch adapter and a 3/8 inch hex adapter. THOSAF states only that its extractors work with any drill, with no drive size given.
Case and storage
A case keeps small extractors from wandering off between jobs. VEVOR includes a waterproof PP case, DPTOOL includes a case with its 2 solid iron bars, and WYBENZ includes an orange case. toolant and THOSAF list no case, so plan a pouch or a drawer tray for them. Laser engraved sizes, which VEVOR states, and engraved imperial dimensions, which DPTOOL states, make it faster to pick the right extractor from a full case.
Use as directed. Wear eye protection and clamp the work before the drill starts, since a snapped extractor or a spinning fastener throws sharp chips. Run the drill in reverse for extraction, keep hands clear of the bit, and stop if the extractor starts to slip instead of bite. See the OSHA welding overview and our Safety Disclaimer.
Before You Strike an Arc
- Match the extractor to the fastener size before you drill; the sets here cover 3 to 12mm at the small end and 1/4 inch to 3/4 inch at the large end.
- Check that your ratchet or drill fits the drive the set states: 1/2 and 3/8 inch square drive, or 3/8 and 1/4 inch tools.
- Lay out the case on arrival and count every piece against the listing, since two listings here disagree with their own spec tables on piece count.
- Keep the knockout pin and adapters with the set so the deep extractors and lug nut sockets stay usable.
- Wear eye protection and clamp the work before the drill starts.
For more options, see our metal fab tools guides.
FAQ for welders
How to use a bolt extractor set?
Drill a pilot hole with the right size extractor, then seat the extractor and turn it counterclockwise to back the fastener out. DPTOOL states to tap the extractor into the damaged nut with a hammer, then loosen it with a 1/2 inch or 3/8 inch square drive wrench.
How much is a bolt extractor set?
This guide does not list prices, and listings do not publish one price for the category. Piece count is the clearest guide: the sets here run from 6 pieces to 46 pieces, and the larger Cr-Mo kits with cases sit at the top end of the range.
How does a screw extractor set work?
A screw extractor bites into the damaged screw as it turns counterclockwise, and the reverse spiral or multi-spline teeth grip tighter as you turn. Once it bites, steady reverse pressure backs the screw out instead of driving it deeper.
How do you use a screw extractor set?
Pick the extractor that matches the screw size, drill a pilot hole, seat the extractor, and turn it counterclockwise with a drill in reverse or a wrench. WYBENZ dual-head extractors drill and extract with one tool: drill end first, flip, then reverse to extract.
What is the best screw extractor set?
The best screw extractor set depends on the fasteners you face, but in this guide the toolant 46-piece set ranks first: it covers bolt, multi-spline, hand and deep extractors with adapters and a knockout pin, and it carries the only stated warranty here, one year. WYBENZ ranks second with the same piece count and a dual-head design, while VEVOR suits a shop that wants a waterproof case and engraved sizes.
Related: Screw Extractor vs Bolt Extractor: Which One Should You Buy?, Best Extra Long Screw Extractor (2026): 5 Sets Compared, Best Twist Drill Bit Set (2026): 5 Picks for Wood, Plastic and Thin Metal, and Types of Drill Bit: Which One to Buy.
Scoring, line by line
Each set is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Bolt extractor sets carry no electrical safety listing to state, so every set here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| toolant 46-Piece Impact | 9.5 | 30 | 21 | 21 | 0 | 0 |
| WYBENZ 46-Piece | 9.5 | 29 | 21 | 21 | 0 | 0 |
| VEVOR 29-Piece | 9.4 | 28 | 20 | 20 | 0 | 0 |
| DPTOOL 22-Piece | 9.4 | 27 | 20 | 20 | 0 | 0 |
| THOSAF 6-Piece | 9.4 | 26 | 19 | 20 | 0 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.




