Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Extra Long Screw Extractor (2026): 5 Sets Compared

Screw extractor sets compared by piece count, size range, steel, drill bits and warranty for broken bolts and stripped screws.

Best Extra Long Screw Extractor (2026): 5 Sets Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1CRAFTSMAN CMMT14108Best OverallCRAFTSMAN CMMT141089.5/10View on Amazon
  2. 2WYBENZ 14-Piece SetBest Kit With Drill BitsWYBENZ 14-Piece Set9.5/10View on Amazon
  3. 3DUNDOO 15-Piece SetWidest Size RangeDUNDOO 15-Piece Set9.5/10View on Amazon
  4. 4Wolfride 10-Piece SetBest Hex Shank SetWolfride 10-Piece Set9.4/10View on Amazon

A bolt snaps off flush in a bracket on the bench, and the head is gone, so no wrench can grab it. A best extra long screw extractor bites into the stub and backs it out without drilling the whole hole oversize. This guide compares the sets on piece count, size range, steel, drill bits and warranty, so the set on your bench fits the fasteners you face.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall CRAFTSMAN CMMT14108: Size ranges from 1/8 in to 3/4 in with a full lifetime warranty. Check price on Amazon
  • Best Kit With Drill Bits WYBENZ 14-Piece Set: 7 left-hand cobalt HSS drill bits and 7 Cr-Mo extractors in a storage case. Check price on Amazon
  • Widest Size Range DUNDOO 15-Piece Set: 15 pieces from 1/8 in to 1/2 in with hex head multi-spline grip. Check price on Amazon
  • Best Hex Shank Set Wolfride 10-Piece Set: 10 pieces in 5 sizes with a 1/4-inch hex shank for drills and impact drivers. Check price on Amazon

The machines

CRAFTSMAN CMMT14108 Spiral Screw Extractor

CRAFTSMAN CMMT14108 Spiral Screw Extractor

CRAFTSMAN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A spiral screw extractor that covers size ranges from 1/8 in to 3/4 in, with a left-hand spiral design for grip and a full lifetime warranty.

Pros

  • Size ranges from 1/8 in to 3/4 in
  • Left-hand spiral design for extra gripping power
  • Full lifetime warranty
  • Removes broken studs, bolts, socket screws and fittings

Cons

  • No drill bits are included
  • Steel type is not stated
  • No storage case is stated
  • Ranges share endpoints, so match the extractor to the fastener with care
14Pcs Screw Extractor Set and Left Hand Drill Bits

14Pcs Screw Extractor Set and Left Hand Drill Bits

WYBENZ9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 14-piece set with 7 cobalt HSS left-hand drill bits and 7 Cr-Mo extractors, in a storage case, with a 135-degree cutting angle and HRC 63-66 hardness.

Pros

  • 7 left-hand cobalt HSS drill bits included
  • 7 Cr-Mo extractors in sizes 1# to 5#
  • 135-degree angle cuts with less axial resistance
  • Storage case keeps the set together

Cons

  • Do not use on 440 stainless or similarly hardened alloys
  • No warranty term is stated
  • High speed needs coolant and firm control
15 Pieces Screw Extractor Set

15 Pieces Screw Extractor Set

DUNDOO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-piece set of hex head multi-spline extractors from 1/8 in to 1/2 in, in heat-treated Cr-Mo steel, with a wrench-direct design and adapters for hex and impact drives.

Pros

  • 15 pieces from 1/8 in to 1/2 in
  • Hex head multi-spline grip with a spiral left-hand design
  • Connects directly with a wrench, no connecting sleeve
  • Includes 3/8 in to 1/4 in hex adapter and 3/8 in to 1/2 in impact adapter

Cons

  • No drill bits are included
  • No warranty term is stated
  • No storage case is stated
  • Largest size is 1/2 in, below the 3/4 in top of the CRAFTSMAN set
Wolfride 10Pcs Broken Screw Extractor Set

Wolfride 10Pcs Broken Screw Extractor Set

Wolfride9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-piece set in 5 sizes from #1 to #5, in heat-treated carbon steel, with a 1/4-inch hex shank for drills, screwdrivers and impact drivers.

Pros

  • 10 pieces in 5 sizes from #1 to #5
  • 1/4-inch hex shank fits drills, screwdrivers and impact drivers
  • Heat-treated carbon steel with strong wear resistance
  • Hand spiral design grips with less slipping

Cons

  • No drill bits are included
  • No warranty term is stated
  • No storage case is stated
  • Needs a pilot hole drilled first
BOSCH BSPE1 1-Piece #1 Spiral Flute High-Carbon

BOSCH BSPE1 1-Piece #1 Spiral Flute High-Carbon

Bosch9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single #1 spiral flute extractor in heat-treated high-carbon steel, with left-hand flutes, rolled threads and laser-etched marking.

Pros

  • Left-hand flutes grip the metal firmly
  • Rolled threads are cleaner and more accurate than machined threads
  • Laser-etched marking will not wear off
  • Rust- and tarnish-resistant design

Cons

  • A single #1 extractor, not a set
  • No drill bit is included
  • No warranty term is stated
  • No storage case is stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Pieces Size range Material Drill bits Warranty
CRAFTSMAN CMMT14108 9.5/10 Not stated 1/8 in to 3/4 in Not stated Not included Full Lifetime Warranty
WYBENZ 14-Piece Set 9.5/10 14 pieces 1/8 in to 19/64 in Cr-Mo and 6542 HSS 7 left-hand bits Not stated
DUNDOO 15-Piece Set 9.5/10 15 pieces 1/8 in to 1/2 in Cr-Mo steel Not included Not stated
Wolfride 10-Piece Set 9.4/10 10 pieces #1 to #5 Carbon steel Not included Not stated
Bosch BSPE1 9.4/10 1 piece #1 High-carbon steel Not included Not stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 11 November 2026.

Buying guide: best extra long screw extractor

Piece count and size range

Count the sizes before you buy. The WYBENZ set holds 14 pieces, the DUNDOO set holds 15 pieces and the Wolfride set holds 10 pieces, while the CRAFTSMAN set covers size ranges from 1/8 in to 3/4 in and the Bosch is a single #1 extractor. The DUNDOO set spans 1/8 in to 1/2 in across its 15 pieces, and the WYBENZ drills run 1/8 in to 19/64 in.

Left-hand drill bits

Some sets include the drill bits and some do not. The WYBENZ set is the only set here with left-hand drill bits: 7 cobalt HSS bits in 1/8 in, 5/32 in, 3/16 in, 1/4 in and 19/64 in. The other sets need a drill bit of the right size before the extractor goes in, so check what you already own.

Steel and hardness

Steel decides how the extractor holds up under torque. The WYBENZ drills are cobalt fortified 6542 HSS at HRC 63-66, and its extractors are 35# Cr-Mo steel. The DUNDOO set is heat-treated chromium molybdenum steel, the Wolfride set is heat-treated carbon steel and the Bosch is heat-treated carbon steel with rolled threads. The CRAFTSMAN listing states no steel type.

Drive and shank

How the extractor connects decides what turns it. The DUNDOO set connects directly with a wrench, with no connecting sleeve, and includes a 3/8 in to 1/4 in hex adapter and a 3/8 in to 1/2 in impact adapter. The Wolfride set has a 1/4-inch hex shank that fits most power drills, electric screwdrivers and impact drivers. The Bosch and CRAFTSMAN listings state no drive size, so check your wrench and chuck before you buy.

Warranty

Only the CRAFTSMAN set states a warranty: a full lifetime warranty. The other listings state no warranty term, so the warranty score goes to the CRAFTSMAN set alone.

Use as directed. Wear eye protection, clamp the work before you drill, and keep your hands clear of the bit. Run the drill in reverse at low speed, as the WYBENZ listing directs, and use coolant if you run at high speed. Never force a stuck extractor, since a snapped extractor is harder to remove than the bolt. See the OSHA welding overview before you start.

Before You Strike an Arc

  • Check the extractor size against the broken fastener before you drill the pilot hole.
  • Set the drill to reverse and low speed, as the WYBENZ listing directs, and keep coolant on hand for high speed work.
  • Confirm the left-hand drill bits are in the case: only the WYBENZ set includes them.
  • Check the drive fit on arrival: the DUNDOO set takes a wrench directly, and the Wolfride set takes a 1/4-inch hex shank.
  • Keep the storage case closed between jobs so the small sizes do not go missing.

FAQ for welders

Do I need left-hand drill bits to use a screw extractor?

Not always. The WYBENZ set includes 7 left-hand drill bits, so the drill and the extractor come together. The other sets need a drill bit of the right size first, so drill the pilot hole, then turn the extractor in by hand or with a wrench.

What size screw extractor do I need?

Match the extractor to the broken fastener. The DUNDOO set spans 1/8 in to 1/2 in, the CRAFTSMAN set covers 1/8 in to 3/4 in and the Wolfride set covers #1 to #5. Measure the fastener first, then pick the extractor that bites without splitting the stub.

Can I use a screw extractor with an impact driver?

The Wolfride set has a 1/4-inch hex shank that fits impact drivers, and the DUNDOO set includes a 3/8 in to 1/2 in impact adapter. The other listings do not say they fit an impact driver, so use a hand wrench or a drill in reverse instead.

Why did my screw extractor snap?

Extractors snap when the bite is shallow or the turn is forced. Drill a pilot hole first, run the drill in reverse at low speed, and turn the extractor slowly with steady pressure. The WYBENZ listing warns against high speed without coolant and against use on 440 stainless or similarly hardened alloys.

Does a screw extractor set include a warranty?

Only the CRAFTSMAN set states one: a full lifetime warranty. The other listings state no warranty term.

Related: the best cobalt drill bit set, the best drill bits for steel, the best twist drill bit set and the metal fab tools hub. Also see our cobalt vs HSS drill bits for steel. Also see our black oxide vs cobalt drill bits. Also see our how to sharpen a drill bit. Also see our best step drill bit under 15.

Scoring, line by line

Each extractor set is scored on performance, build, value, safety and warranty. How we pick explains the weights. No listing states a safety standard, so safety adds no points here, and only the CRAFTSMAN set states a warranty term.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
CRAFTSMAN CMMT14108 9.5 29 21 20 0 4
WYBENZ 14-Piece Set 9.5 32 21 21 0 0
DUNDOO 15-Piece Set 9.5 30 21 21 0 0
Wolfride 10-Piece Set 9.4 28 20 20 0 0
Bosch BSPE1 9.4 26 21 18 0 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

More buying guides