Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Extra Long Hacksaw Blades (2026): 4 Packs Compared

Four packs of hacksaw blades for metal cutting, compared on length, teeth per inch, width, material and pack size from what each listing states.

Best Extra Long Hacksaw Blades (2026): 4 Packs Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1LENOX 12-Inch 18 TPIBest OverallLENOX 12-Inch 18 TPI9.6/10View on Amazon
  2. 2Hanpex 12-Inch 18 TPIBest 10 PackHanpex 12-Inch 18 TPI9.6/10View on Amazon
  3. 3Imachinist 10-Inch 32 TPIFinest TeethImachinist 10-Inch 32 TPI9.5/10View on Amazon
  4. 4JUGREAT Bi-Metal 24 TPIWidest Material ListJUGREAT Bi-Metal 24 TPI9.5/10View on Amazon

A bench job often ends with a cut: a threaded rod that needs trimming, a copper pipe that needs shortening, a length of rebar that needs sizing before it goes into a frame. When the cut runs through metal, the blade matters more than the frame, and the best extra long hacksaw blades match tooth count and width to the metal in front of you. This roundup compares blade packs on what each listing states: length, teeth per inch, width, material and pack size.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall LENOX 12-Inch 18 TPI: A consistent 12 inch, 18 TPI bi-metal listing with a shatter-resistant build and stated uses from black pipe to rebar. Check price on Amazon
  • Best 10 Pack Hanpex 12-Inch 18 TPI: A 12 inch, 18 TPI high carbon steel pack of 10 with a stated universal fit for all 12 inch frames. Check price on Amazon
  • Finest Teeth Imachinist 10-Inch 32 TPI: A 32 TPI bi-metal M2 blade, 10 inch long and 1/2 inch wide, with wavy set teeth for metal cutting. Check price on Amazon
  • Widest Material List JUGREAT Bi-Metal 24 TPI: A 24 TPI bi-metal pack of 10 stated for wood, PVC, copper tube, iron pipe, stainless steel and rebar. Check price on Amazon

The machines

LENOX Tools Hacksaw Blade, 12-inch, 18 TPI

LENOX Tools Hacksaw Blade, 12-inch, 18 TPI

Lenox9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12 inch bi-metal blade in a 2 pack, with 18 teeth per inch and a 1/2 inch width. The listing states T2 Technology for long blade life and a shatter-resistant build that bends and flexes without breaking. Listed uses cover black pipe, Unistrut, copper pipe, hardened steel, threaded rod and rebar.

Pros

  • Bi-metal build stated as shatter-resistant, bending and flexing without breaking
  • Length, width and tooth count are all stated clearly in the title and bullets
  • Listed for a wide set of metals: black pipe, Unistrut, copper pipe, hardened steel, threaded rod and rebar
  • T2 Technology is stated for long blade life

Cons

  • Blade thickness is not stated in usable form
  • Only a 2 pack is stated
  • No warranty term is stated
  • Material is stated only as Blend in the spec table
Hanpex Hacksaw Replacement Blades (10 Pack)

Hanpex Hacksaw Replacement Blades (10 Pack)

Hanpex9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12 inch high carbon steel blade in a 10 pack, with 18 teeth per inch and wavy teeth. The listing states a universal fit for all 12 inch hacksaw frames and lists soft steel pipes, cast iron rods, copper and aluminum brackets among its uses. The maker describes the blades as flexible and shatterproof.

Pros

  • 10 blades per pack
  • Universal fit stated for all 12 inch hacksaw frames
  • Wavy high carbon steel teeth, stated for copper and aluminum brackets as well as steel pipes and cast iron rods
  • Flexible, shatterproof build as described by the maker

Cons

  • Blade width is not stated
  • Blade thickness is not stated
  • No bi-metal construction is stated
  • No warranty term is stated
Imachinist S101232x2 10" Hacksaw Blades

Imachinist S101232x2 10" Hacksaw Blades

Imachinist9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 inch bi-metal blade in a 2 pack, with 32 teeth per inch, a 1/2 inch width and a 0.025 inch thickness. The listing states an M2 grade bi-metal build with wavy set teeth and a spring steel body, suited to metal cutting. It suits saws which use a 10 inch, 1/2 inch blade.

Pros

  • 32 teeth per inch, the finest pitch here
  • Bi-metal M2+D6A build with a spring steel body
  • Wavy set teeth stated for metal cutting
  • Width, thickness and length all stated in the title and bullets

Cons

  • Only a 2 pack is stated
  • No warranty term is stated
  • A bore diameter is listed with no stated purpose
JUGREAT 10" Hacksaw Blades Replacement Bi-Metal

JUGREAT 10" Hacksaw Blades Replacement Bi-Metal

JUGREAT9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A bi-metal blade in a 10 pack, with 24 teeth per inch, a 1/2 inch width and a spring steel body with a high speed steel edge. The listing states uses across wood, PVC, copper tube, iron pipe, stainless steel and rebar. Length is stated differently in different parts of the listing, as covered in the review.

Pros

  • Bi-metal D6A M2 build with a spring steel body
  • 24 teeth per inch, between the 18 and 32 tooth options here
  • 10 blades per pack
  • Stated for wood, PVC, copper tube, iron pipe, stainless steel and rebar

Cons

  • No warranty term is stated
  • No safety listing is stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Length Teeth per inch Width Pack size
LENOX 12-Inch 18 TPI 9.6/10 12 in 18 TPI 1/2 in 2
Hanpex 12-Inch 18 TPI 9.6/10 12 in 18 TPI Not stated 10
Imachinist 10-Inch 32 TPI 9.5/10 10 in 32 TPI 1/2 in 2
JUGREAT Bi-Metal 24 TPI 9.5/10 10 in title, 12 in bullets 24 TPI 1/2 in 10

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 23 October 2026.

How the scoring works

Each blade is scored on performance, build, value, safety listing and warranty. The method page explains the weights. No listing here states a safety listing or a warranty term, so no blade earns points on those two criteria, and the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
LENOX 12-Inch 18 TPI 9.6 30 21 20 n/a 0
Hanpex 12-Inch 18 TPI 9.6 28 20 21 n/a 0
Imachinist 10-Inch 32 TPI 9.5 27 20 19 n/a 0
JUGREAT Bi-Metal 24 TPI 9.5 26 19 20 n/a 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

Buying guide: best extra long hacksaw blades for the shop

Tooth count

Tooth count runs from 18 teeth per inch to 32 teeth per inch here. The Lenox and Hanpex listings state 18 teeth per inch, the JUGREAT listing states 24 teeth per inch, and the Imachinist listing states 32 teeth per inch in its title and bullets. The JUGREAT listing advises checking its table to match tooth count to material, so match the stated count to the metal on the bench.

Length and width

Length is the least consistent figure here. Lenox and Hanpex state 12 inch blades, Imachinist states a 10 inch blade, and JUGREAT states 10 inch in its title and 12 inch in its bullets. Width is 1/2 inch where stated, and Hanpex states no width. Match the stated length to the frame on the bench, since a frame takes the blade length it is built for.

Blade material

Three listings state bi-metal builds: Lenox, Imachinist with M2 and D6A, and JUGREAT with a spring steel body and high speed steel edge. Hanpex states high carbon steel with wavy teeth. Lenox and JUGREAT both describe their blades as shatter-resistant or shatterproof and able to bend and flex, while Hanpex uses the same shatterproof wording for its carbon steel blades.

Pack size

Pack size splits two and two: Lenox and Imachinist state 2 packs, while JUGREAT and Hanpex state 10 packs. A 10 pack suits a shop that goes through blades, while a 2 pack suits a short job or a spare drawer. Pack size says nothing about blade quality on its own, so weigh it with length, tooth count and material.

Use as directed. Keep hands clear of the cut, keep the workpiece clamped, and stop if a blade binds or bends. A worn or damaged blade should be swapped before it snaps.

Before You Strike an Arc

  • Match the blade length and width to the frame: the listings here state 12 inch and 10 inch lengths, with a 1/2 inch width where stated.
  • Match tooth count to the job: 18 teeth per inch, 24 teeth per inch and 32 teeth per inch are all covered here, so pick from the listings for the metal at hand.
  • Seat the blade fully in the frame before cutting.
  • Check the pack on arrival: count the blades against the stated pack size and look for bent or damaged blades.

FAQ for welders

What hacksaw blade for aluminum?

The Hanpex listing names aluminum brackets among its uses, alongside soft steel pipes, cast iron rods and copper. No other listing here names aluminum. For aluminum brackets, Hanpex is the listing that states the use.

What size is a standard hacksaw blade?

The listings here state two lengths: 12 inch and 10 inch, with a 1/2 inch width where width is stated. Lenox and Hanpex state 12 inch, Imachinist states 10 inch, and JUGREAT states both figures in different parts of its listing. Match the stated length and width to the frame rather than assuming a size fits all frames.

How thick is hacksaw blade?

Thickness is stated as 0.025 inch in the JUGREAT bullets and the Imachinist bullets, while both spec tables state 0.03 inches. Lenox and Hanpex state no usable thickness figure. Where the two parts of a listing disagree, this article follows the bullets.

What hacksaw blade for metal?

All four listings state metal cutting uses. The Imachinist listing states metal cutting and thick metal, the JUGREAT listing names iron pipe, stainless steel and rebar, and the Lenox listing names black pipe, hardened steel and threaded rod. Tooth count and length narrow the choice: 18, 24 and 32 teeth per inch are all covered here.

Related: hacksaw blade for aluminum, hacksaw blades, hacksaw vs angle grinder for metal, bolt cutters vs hacksaw for metal, and the metal fab tools hub.

More buying guides