Best Hacksaw Blades (2026): 5 Packs Compared for Metal
Five hacksaw blade packs compared by length, TPI, material, pack size and safety, from mixed-TPI 10-packs to shatter-resistant 2-packs.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallHanpex 10-Pack9.7/10View on Amazon - 2
Best Fine ToothJUGREAT 10-Pack9.6/10View on Amazon - 3
Best Pro PickStarrett 10-Pack9.6/10View on Amazon - 4
Best 10-InchLenox 2-Pack9.6/10View on Amazon - 5
Best 2-PackImachinist 2-Pack9.5/10View on Amazon
The best hacksaw blades are the ones that cut straight without snapping, because a blade that shatters mid-cut wastes the workpiece and the afternoon. Bi-metal flex, the right teeth per inch and a pack size that matches how often you cut matter more than the brand on the box. A dull blade makes you push harder, and pushing harder is what snaps blades and ruins workpieces. We compared five hacksaw blade packs by length, TPI, material, pack size and stated safety features, using only what each listing publishes. Every pack here is bi-metal, so the differences come down to tooth count, pack size and what each listing actually promises.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Hanpex 10-Pack: 18, 24 and 32 TPI in one 10-pack, bi-metal HSS, case included Check price on Amazon
- Best Fine Tooth JUGREAT 10-Pack: 32 TPI bi-metal, Safe Flex, 10-pack for clean cuts Check price on Amazon
- Best Pro Pick Starrett 10-Pack: Starrett SafeFlex bi-metal, 18 TPI, contractor 10-pack Check price on Amazon
- Best 10-Inch Lenox 2-Pack: Shatter resistant bi-metal, 24 TPI, longer blade life claim Check price on Amazon
- Best 2-Pack Imachinist 2-Pack: M2 bi-metal, 24 TPI, wavy teeth for ferrous metal Check price on Amazon
Best hacksaw blades: the picks

Hanpex Hacksaw Replacement Blade Sets (10 Pack)
A 10-pack of 12 in bi-metal HSS blades in 18, 24 and 32 TPI with wavy set teeth and a plastic storage case.
Pros
- 18, 24 and 32 TPI in one 10-pack for any stock
- Bi-metal HSS with wavy set teeth for fast cutting
- 15X longer blade life is claimed by the listing
- Plastic case keeps spare blades organized and sharp
Cons
- Mixed TPI means fewer blades of each size
- 1.6 mm thickness figure needs checking against the listing
- No warranty term is stated
- Yellow coating shows grime after use

JUGREAT 12" Hacksaw Blades Replacement
A 10-pack of 12 in bi-metal blades at 32 TPI with high-speed steel edges for fine, clean cuts in metal and pipe.
Pros
- 32 TPI for fine, clean cuts in thin stock
- Flexible bi-metal Safe Flex structure
- High-speed steel cutting edge stays sharp
- 10-pack suits a busy shop's consumption
Cons
- 32 TPI only, with no coarse-tooth option
- Table lists 0.03 in vs the bullets' 0.025 in
- No warranty term is stated
- White finish shows marks quickly

Starrett Hacksaw Blade, 12" Length, 1/2" Width
A 10-pack of 12 in Starrett SafeFlex bi-metal blades at 18 TPI, aimed at contractors and tradesmen.
Pros
- SafeFlex shatter-resistant bi-metal build
- Aimed at contractors and tradesmen
- 0.024 in thin kerf wastes less material
- 10-pack comes in a storage case
Cons
- Table lists 24 teeth vs the title's 18 TPI
- Bullets give minimal specification detail
- 1.44 oz per blade feels light
- No warranty term is stated

LENOX Tools Hacksaw Blade, Bi-Metal
A 2-pack of 10 in Lenox bi-metal blades at 24 TPI with a shatter-resistant build for general metal cutting.
Pros
- Shatter resistant bi-metal build
- Up to 100% longer blade life is claimed
- 24 TPI suits general metal cutting
- Bends and flexes without breaking
Cons
- Only 2 blades per pack
- Table's 0.45 in thickness figure looks off
- No warranty term is stated
- Multi-color finish with no choice

Imachinist S101224x2 10" Hacksaw Blades
A 2-pack of 10 in Imachinist bi-metal M2 blades at 24 TPI with wavy set teeth for ferrous metal.
Pros
- M2 grade bi-metal, flexible and durable
- Wavy set teeth cut ferrous metal well
- 24 TPI for general-purpose use
- Fits all standard 10 in hacksaw frames
Cons
- Table lists 18 TPI vs the title's 24 TPI
- Warns against non-ferrous metals
- 0.04 kg weight feels very light
- No warranty term is stated
Other welders and gear to compare
12" 24 TPI Standard Hacksaw Blades GF213Check price on Amazon
ValueMax 8-In-1 Multi-Blades Hand SawCheck price on Amazon
Spec sheet comparison
| Blade | Gear Score | Length | TPI | Pack | Material | Warranty |
|---|---|---|---|---|---|---|
| Hanpex 10-Pack | 9.7/10 | 12 in | 18TPI / 3Pc. 24TPI / 4Pc. 32TPI | 10 | Bi-metal HSS | Not stated |
| JUGREAT 10-Pack | 9.6/10 | 12 in | 32 | 10 | Bi-metal HSS | Not stated |
| Starrett 10-Pack | 9.6/10 | 12 in | 18 | 10 | BiMetal SafeFlex | Not stated |
| Lenox 2-Pack | 9.6/10 | 10 in | 24 | 2 | Bi-metal | Not stated |
| Imachinist 2-Pack | 9.5/10 | 10 in | 24 | 2 | Bi-metal M2 | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 22 October 2026. None of the five state a warranty term.
Buying guide: what matters in hacksaw blades
Length: 10 inch or 12 inch
The JUGREAT, Starrett and Hanpex are 12 in blades; the Lenox and Imachinist are 10 in. Match the blade to the hacksaw frame first, because a 12 in blade does not fit a 10 in frame and a 10 in blade leaves a 12 in frame underused. Longer blades cover more stroke per pull, which speeds long cuts through pipe and bar stock. Shorter blades suit tight spaces and smaller frames. All five list a 1/2 in width, the standard for full-size hacksaw frames, so width is not a differentiator here.
Teeth per inch
The JUGREAT lists 32 TPI, the Hanpex mixes 18, 24 and 32 TPI across its 10 pack, the Starrett lists 18 TPI, and the Lenox and Imachinist list 24 TPI. One mismatch each: the Starrett spec table says 24 teeth against the title’s 18 TPI, and the Imachinist table says 18 TPI against the title’s 24 TPI; we trusted the titles in both cases. Finer teeth suit thin stock and leave cleaner edges; coarser teeth clear thick stock faster but leave a rougher cut. The old rule is three teeth in the work at all times, which is why thin sheet wants fine teeth. The Hanpex 10-pack is the only one that lets you try all three common counts without buying three packs.
Bi-metal and HSS
All five are bi-metal: a high-speed steel cutting edge welded to a flexible spring steel body. The JUGREAT and Hanpex name D6A and M2 grades; the Imachinist names M2; the Starrett names its SafeFlex line; the Lenox claims up to 100% longer blade life than its prior generation. Bi-metal bends where plain carbon steel snaps, which is the whole safety story for hand sawing: a flexing blade warns you, a shattering one does not. The Starrett SafeFlex and Lenox shatter-resistant lines put that property in the product name. None of the five list a Rockwell hardness figure, so the grade names are all the listing gives.
Pack size and value
The JUGREAT, Starrett and Hanpex come in 10-packs; the Lenox and Imachinist come in 2-packs. A 10-pack suits a busy shop where blades are consumables; a 2-pack suits occasional use or trying a brand. The Hanpex adds a plastic case, which keeps spare blades from dulling against each other in the drawer. The Starrett 10-pack comes cased as well. Loose blades in a drawer dull fast and cut fingers, so a case is worth more than it looks.
What they cut
The JUGREAT lists wood, PVC, copper tube, iron pipe, stainless steel and rebar. The Hanpex lists wood, PVC, copper tube and aluminum pipe. The Imachinist warns against non-ferrous metals like aluminum, copper and brass with its TPI, which is an honest limit most listings skip. Match the TPI to the material: the wrong teeth chatter instead of cut, and chatter dulls teeth fast. Stainless needs patience and cutting fluid; rebar eats coarse teeth. See our best hacksaw for cutting steel for the frame side, and hacksaw vs band saw for metal when the job outgrows hand power.
Blade thickness and kerf
The JUGREAT states 0.025 in thick, the Starrett 0.024 in and the Imachinist 0.025 in, all on a 1/2 in wide blade. Thinner blades cut a narrower kerf and waste less material, but they wander more in thick stock. The Lenox table lists 0.45 in, which is clearly a data entry error, and the Hanpex lists 1.6 mm; neither is directly comparable. For most hand sawing, the standard 0.025 in bi-metal blade is the safe default.
FAQ for welders
What TPI should I use for metal?
The picks here run 18 to 32 TPI. Finer teeth (24 to 32) suit thin stock and leave clean edges; coarser teeth (18) suit thick stock and clear chips faster. The old rule is three teeth in the work at all times. The Hanpex 10-pack is the only one covering all three common counts.
How thick are these blades?
The JUGREAT states 0.025 in, the Starrett 0.024 in and the Imachinist 0.025 in. The Lenox and Hanpex list different figures in their tables; check the listing before buying.
Do bi-metal blades really flex?
That is the claim across all five listings: a high-speed steel edge on a spring steel body that bends instead of shattering. The Starrett SafeFlex and Lenox shatter-resistant lines name it directly.
Which pack is best for a beginner?
The Hanpex 10-pack, with 18, 24 and 32 TPI blades to try, plus a plastic case for storage. A beginner learns fastest by feeling the difference between tooth counts on scrap before touching the real workpiece.
Do any state a warranty?
No. None of the five state a warranty term, so warranty scored zero across the board. The Imachinist asks buyers to contact them about wrong or defective blades.
Related: the best hacksaw blade for stainless steel, the best hacksaw for cutting steel, hacksaw vs band saw for metal and all metal fab tools guides. Change blades before they dull completely; a fresh blade is safer than a tired one.
Scoring, line by line
Each blade pack is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. For blades, safety means stated shatter resistance or flexible bi-metal construction; all five state some form of it, from SafeFlex to shatter-proof to wavy-set flex. None state a warranty term, so warranty scored zero for every pick and the ranking comes from the other four lines. The Hanpex leads on TPI range and pack size; the JUGREAT follows on fine-tooth cutting.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Hanpex 10-Pack | 9.7 | 32 | 21 | 22 | 7 | 0 |
| JUGREAT 10-Pack | 9.6 | 30 | 21 | 22 | 7 | 0 |
| Starrett 10-Pack | 9.6 | 28 | 21 | 20 | 8 | 0 |
| Lenox 2-Pack | 9.6 | 28 | 21 | 19 | 8 | 0 |
| Imachinist 2-Pack | 9.5 | 27 | 20 | 20 | 7 | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.




