Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Hacksaw vs Band Saw for Metal: Which One Should You Buy?

Hacksaw vs band saw for metal: the direct answer, then a side-by-side comparison of speed, cost, portability and cut quality for home shops.

Hacksaw vs Band Saw for Metal: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Lenox Tools HT50 High-Tension HacksawLenox Tools HT50 High-Tension Hacksaw9.7/10View on Amazon
  2. 2Imachinist S933414 M42 93" X 3/4" X 10/14tpi Bi-Metal MetalImachinist S933414 M42 93" X 3/4" X 10/14tpi Bi-Metal Metal9.6/10View on Amazon
  3. 3Pasco 4290 Tiny Tim HacksawPasco 4290 Tiny Tim HacksawView on Amazon
  4. 4WEN Portable Band Saw for MetalWEN Portable Band Saw for MetalView on Amazon
  5. 5VEVOR Portable Band SawVEVOR Portable Band SawView on Amazon
  6. 6MAXXT 2-in-1 Band Saw with Table Saw BaseMAXXT 2-in-1 Band Saw with Table Saw BaseView on Amazon
  7. 7Klutch Horizontal/Vertical Metal Cutting Band SawKlutch Horizontal/Vertical Metal Cutting Band SawView on Amazon

Hacksaw vs band saw for metal comes down to this: a hacksaw is the portable hand tool for occasional cuts, and a band saw is the powered machine for fast, square, repeatable cuts. If you cut metal a few times a month, a good high-tension hacksaw with 24 TPI bi-metal blades is enough. If you cut stock weekly, a band saw may earn its keep in time and square cuts.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The difference in one paragraph

A hacksaw moves a straight blade back and forth by hand; a band saw moves a looped blade continuously under power. The band saw cuts faster, straighter and with less effort, but it costs more and needs bench or floor space. The hacksaw goes anywhere and cuts anything the blade can reach, but it is slow and the cut quality depends on your hand.

Side by side

Hacksaw Band saw Our take
Power Hand power Motor power Band saw for volume
Cut speed Slow Fast Band saw
Portability Very portable Bench or floor size Hacksaw
Cost Low Higher Hacksaw
Cut quality Depends on the hand Square and repeatable Band saw
Blade 12 in, 24 TPI on three picks; 6 in, 32 TPI on the Pasco Loop blade Check blade size

Speed and effort

A band saw moves its blade continuously under power where a hacksaw moves one straight blade back and forth by hand, so volume cutting favors the band saw. For a single cut in the field, the hacksaw wins on setup time: grab it, clamp the work and saw. For a rack of parts, the band saw wins on every cut after the first.

Cost

Blades are the consumable on both: 24 TPI bi-metal hacksaw blades in 12 inch length are the consumable here, and a fresh blade is what keeps a hacksaw cutting straight.

Portability and space

The hacksaw lives in a toolbox. The Pasco 4290 Tiny Tim is made for tight spots a full frame cannot reach. A band saw lives on a bench or the floor and stays there. If your metal work happens at the farm gate, in the truck or on a ladder, the hacksaw is the one that fits any toolbox.

Cut quality

A band saw cuts square and repeatable with the work clamped in a vise. A hacksaw cut is only as square as your stroke. High-tension frames like the Lenox HT50 keep the 12 inch bi-metal blade taut, which is what separates a straight cut from a wandering one.

Blade tension and frames

Tension is what keeps a blade cutting straight. The Lenox HT50 uses an I-beam construction stated to tension the blade up to 50,000 psi, with rubberized handles for confident handling in wet and cold environments. It stores up to 5 extra 12 inch hacksaw blades in the I-beam, accepts any LENOX reciprocating saw blade as a jab saw, weighs 1.9 pounds at 15.75 by 6.5 by 1.25 inches, and states a limited lifetime warranty.

The AIRAJ adjusts tension through a wing knob on the head: loosen it fully to swap the blade, tighten for one-click replacement. It comes with one 24 TPI bi-metal blade plus 10 spare blades, a high-quality steel frame, and states a 4 inch (100 mm) maximum cutting depth at 18 by 5.5 by 0.75 inches. The Lenox states a limited lifetime warranty, and the AIRAJ and the Pasco state a limited warranty; the JUGREAT blades state no warranty.

The gear: hacksaws worth owning

Here are the four from our listings, ranked.

1. Lenox HT50 High-Tension Hacksaw

The Lenox HT50 is the top pick: a high-tension frame with a 12 in bi-metal blade at 24 TPI. The aluminum body keeps it light while the high tension keeps the cut straight. This is the hacksaw to buy first.

2. AIRAJ 12 Inch High-Tension Hacksaw

The AIRAJ is the value pick: a 12 inch high-tension hacksaw for metal with one 24 TPI bi-metal blade plus 10 spare blades and a wing knob for fast blade changes. One blade plus 10 spares covers a long stretch of occasional cutting.

3. Hacksaw Replacement Blades, 10 Pack

The blade pick: a 10 pack of high speed 24 TPI replacement blades in 12 inch length, carbon strength steel. Blades are consumables; buy the 10 pack and stop nursing dull blades.

4. Pasco 4290 Tiny Tim Hacksaw

The tight-spot pick: the Pasco 4290 Tiny Tim hacksaw for places a full frame cannot reach. Small, light and always in the toolbox.

Hacksaw vs band saw for metal: which should you buy?

Buy the hacksaw first: it handles occasional cuts, tight spots and field work. Buy the band saw when cutting volume makes hand sawing painful. Most home shops end up with both, and the hacksaw stays useful for tight spots and field work.

FAQ for welders

What TPI should a hacksaw blade be for metal?

Three listings use 24 TPI bi-metal or high speed steel blades; the Pasco uses a 6-inch, 32-tooth blade.

Can a hacksaw cut hardened steel?

The listings do not state hardened steel. They list steel, stainless steel, steel bars and drill rod for the 24 TPI bi-metal blades in these listings.

Why does my hacksaw blade keep breaking?

Low tension, too much pressure or the wrong TPI for the stock. The listings state tension only: the Lenox tensions its blade up to 50,000 psi, and the AIRAJ adjusts tension through a wing knob, with blades replaced when teeth are severely worn.

Is a band saw worth it for a home shop?

When you cut stock regularly. For a few cuts a month, a good hacksaw with fresh 24 TPI blades is often the better buy.

How many blades come with each saw?

The Lenox comes with one 12 inch 24 TPI blade and stores up to 5 extra in the I-beam. The AIRAJ comes with one blade plus 10 spares. The JUGREAT is a 10 pack of blades. The Pasco is a bare tool.

Related: bi-metal vs carbide band saw blade, portable vs horizontal band saw, deep cut vs compact band saw, and the metal fab tools hub.

More buying guides