Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Chop Saw vs Band Saw for Metal: Which One Should You Buy?

The Evolution S15CPS chop saw and the WEN BA3962 band saw compared on cutting action, capacity, weight and warranty, with a pack of cut-off wheels as the odd listing out.

Chop Saw vs Band Saw for Metal: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Evolution S15CPS 15" Heavy-Duty Metal Cutting ChopEvolution S15CPS 15" Heavy-Duty Metal Cutting Chop9.7/10View on Amazon
  2. 2WEN Band Saw with Stand, 10-Inch, 3.5-AmpWEN Band Saw with Stand, 10-Inch, 3.5-Amp9.6/10View on Amazon
  3. 310 Pcs 14 Inch Cut Off Wheel,Abrasive Cut Off10 Pcs 14 Inch Cut Off Wheel,Abrasive Cut Off9.2/10View on Amazon

Verdict. The Evolution S15CPS is the chop saw to buy for straight cuts in mild steel, with a 14 inch EVOMAX blade, an E-Brake and a shadow line guide. The WEN BA3962 is the band saw to buy for curved cuts, with a 6 inch depth and a 9-3/4 inch width. The VVoodeinck listing is a 10-pack of 14 inch cut-off wheels, not a saw, so it does not belong in the same choice.

Chop saw vs band saw for metal is the choice between a plunge cut with a spinning blade and a loop blade that follows a curve. A chop saw plunges a spinning blade straight down through the stock, and a band saw runs a loop blade through the cut. The listings below show what each side actually offers. This comparison puts the Evolution S15CPS chop saw against the WEN BA3962 band saw, with a pack of cut-off wheels as the odd listing out.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The saws and the wheels

Evolution S15CPS 15" Heavy-Duty Metal Cutting Chop

Evolution S15CPS 15" Heavy-Duty Metal Cutting Chop

EVOLUTION9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15 inch heavy-duty metal cutting chop saw with a 14 inch EVOMAX blade, soft start motor, E-Brake and shadow line guide.

Pros

  • 14 inch EVOMAX blade delivers over 3,500 precise cuts
  • E-Brake stops the blade within 2-3 seconds
  • Soft start motor reduces current surges
  • Shadow line guide and cast iron fence for accurate cuts

Cons

  • Sold as a 15 inch saw with a 14 inch blade
  • No cut capacity figure is stated
  • No warranty term is stated
  • 71.0 pounds, a bench machine rather than a carry-around
WEN Band Saw with Stand, 10-Inch, 3.5-Amp

WEN Band Saw with Stand, 10-Inch, 3.5-Amp

WEN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 inch band saw with a stand, a 3.5-amp motor, two speeds and a 2-year warranty, cutting up to 6 inches deep and 9-3/4 inches wide.

Pros

  • Cuts up to 6 inches deep and 9-3/4 inches wide
  • Two speeds, 1520 or 2620 FPM
  • 2-year warranty
  • Work light, 3-in-1 dust port, fence, miter gauge and 3/8 inch blade included

Cons

  • No item weight is stated
  • No blade life figure is stated
  • No CSA, UL or ETL listing is stated
  • Ships with a single 3/8 inch blade; other widths in the 1/8 to 1/2 inch range are not included
10 Pcs 14 Inch Cut Off Wheel,Abrasive Cut Off

10 Pcs 14 Inch Cut Off Wheel,Abrasive Cut Off

VVoodeinck9.2/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pack of 14 inch abrasive cut-off wheels, 1/8 inch thick with a 1 inch arbor, for metal cutting chop saws.

Pros

  • 10 wheels in the pack
  • 14 inch diameter, 1/8 inch thick, 1 inch arbor
  • Abrasive wheels for metal cutting
  • Fits a chop saw that takes 14 inch wheels

Cons

  • Not a saw, only the wheels
  • No warranty term is stated
  • No cut capacity or blade life figure is stated

Other welders and gear to compare

Side by side: chop saw vs band saw for metal

Evolution S15CPS WEN BA3962 VVoodeinck Cut-Off Wheels
Gear Score 72 68 43
Type 15 in chop saw 10 in band saw with stand 14 in cut-off wheels, 10-pack
Blade 14 in EVOMAX mild steel blade 72 in blade, 1/8 to 1/2 in 14 in abrasive wheel, 1/8 in thick
Cut capacity Not stated 6 in deep, 9-3/4 in wide Not stated
Motor Soft start motor 3.5-amp motor Not stated
Speeds Not stated 1520 or 2620 FPM Not stated
Weight 71.0 pounds Not stated Not stated
Warranty Not stated 2-year warranty Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 13 November 2026. No listing here states a CSA, UL or ETL listing.

Cutting action

The cutting action is the real divide. The Evolution is a chop saw: a 15 inch saw with a 14 inch EVOMAX mild steel blade that plunges down through the stock, with a shadow line guide that shows the cutting path and a cast iron fence that holds the work steady. The WEN is a band saw: a 10 inch saw with a stand whose 72 inch blade runs in a loop, with a cast aluminum work table that bevels up to 45 degrees. A chop saw cuts straight down; a band saw follows a line and cuts curves. The VVoodeinck listing is neither: it is a 10-pack of 14 inch abrasive cut-off wheels, the consumable a chop saw spins, not a machine. See the types of chop saws guide and the portable vs stationary band saw comparison for the wider choice.

Cut capacity

Cut capacity is where the listings split. The WEN band saw cuts up to 6 inches deep and 9-3/4 inches wide, with blades from 1/8 to 1/2 inches in size. The Evolution listing gives no cut capacity figure, only that its blade delivers over 3,500 precise cuts. The VVoodeinck wheels are 14 inch diameter by 1/8 inch thick with a 1 inch arbor, but a wheel on its own has no cut capacity figure. Only the band saw states a capacity figure, so capacity is not a fair point of comparison here.

Blade and wheel

The blade is the working part on each side. The Evolution ships with a 14 inch EVOMAX mild steel blade, and the listing says the blade delivers over 3,500 precise cuts and that its motor technology extends blade life by 30%. The WEN uses 72 inch blades from 1/8 to 1/2 inches in size and ships with a 3/8 inch blade at 6 TPI. The VVoodeinck wheels are 14 inch abrasive wheels, 1/8 inch thick with a 1 inch arbor, sold as a 10-pack. The chop saw blade vs cut off wheel guide explains the difference between a blade and a wheel, and the band saw blade sizes guide covers width and length.

Weight and build

The Evolution is the heavy machine here at 71.0 pounds, with a cast iron fence and a soft start motor. The WEN listing states no item weight, and its table lists 20.0 by 25.0 by 58.0 inches with a stand. The VVoodeinck wheels list no weight either; the table lists 14.0 by 14.0 by 0.1 inches, the size of a wheel. A 71.0 pound chop saw sits heavy on the bench, while a band saw on a stand needs floor space for the table and the work.

What is in the box

The WEN listing names a work light, a 3-in-1 dust port, a fence, a miter gauge and a 3/8 inch blade. The Evolution listing names the saw and its EVOMAX blade, with a shadow line guide and an E-Brake. The VVoodeinck listing names 10 cut-off wheels. Neither saw listing names a spare blade or wheel in the box.

Warranty

Only the WEN states a warranty term: a 2-year warranty. The Evolution and VVoodeinck listings state no warranty term. A warranty term does not change how a saw cuts, but it is the only stated promise about how long a maker stands behind the machine, and it belongs to the band saw side here.

Choose the Evolution S15CPS if

  • You cut mild steel straight and want a shadow line guide and a cast iron fence.
  • You want an E-Brake that stops the blade within 2-3 seconds.
  • You want a soft start motor that reduces current surges.
  • A 71.0 pound machine on the bench suits the shop.

Choose the WEN BA3962 if

  • You cut curves or need a 6 inch depth and a 9-3/4 inch width.
  • You want two speeds, 1520 or 2620 FPM.
  • You want a 2-year warranty in writing.
  • A stand, a work light and a dust port suit the shop.

FAQ for welders

Is a chop saw or a band saw better for cutting metal?

It depends on the cut. The Evolution chop saw plunges straight down with a 14 inch blade and a shadow line guide, while the WEN band saw runs a 72 inch loop blade through curves and cuts up to 6 inches deep. Pick the chop saw for straight cuts and the band saw for curves, with a stated 6 inch depth and 9-3/4 inch width.

What size blade does the Evolution S15CPS use?

The listing says the saw ships with a 14 inch EVOMAX mild steel blade, though the saw is sold as a 15 inch chop saw. The title also says 15 inch blade compatible. Check the blade size against the saw before ordering a spare.

How is a band saw blade changed?

Follow the saw manual for the blade change, since the WEN listing does not give the steps. The WEN uses 72 inch blades from 1/8 to 1/2 inches in size. See the how to coil band saw blade guide for handling a loop blade.

Can cut-off wheels cut metal?

Yes, a chop saw spins cut-off wheels to cut metal. The VVoodeinck wheels are 14 inch abrasive wheels, 1/8 inch thick with a 1 inch arbor, sold as a 10-pack. See the how to change a chop saw blade guide for fitting a wheel.

Does the WEN band saw come with a warranty?

Yes. The WEN listing includes a 2-year warranty, with a work light, a 3-in-1 dust port, a fence, a miter gauge and a 3/8 inch blade. The Evolution and VVoodeinck listings state no warranty term.

Related: best hand held band saw, metal circular saw vs chop saw, cut off wheel vs cold saw, chop saw sizes, and band saw blade sizes.

Scoring, line by line

Each listing is scored out of 10 on performance, build, value, safety and warranty. The Evolution scores highest on performance for its blade life and safety features, and the WEN scores highest on warranty for its stated 2-year term. The VVoodeinck wheels score lowest, since they are consumable wheels, not a saw.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Evolution S15CPS 9.7 32 22 21 7 0
WEN BA3962 9.6 30 21 21 0 3
VVoodeinck Cut-Off Wheels 9.2 18 18 18 0 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

Before you strike an arc. Wear eye and face protection, clamp the work, keep guards in place, and keep gloves away from rotating parts. Clear anything flammable from the area and keep an extinguisher close. See OSHA machine guarding guidance for saws and rotating equipment.

More buying guides