Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Types of Chop Saws and How to Choose One

Abrasive chop saws, cold cut saws, and compound miter saws cut steel and wood in different ways: the blade, the cut capacity, and the job decide which one fits.

Types of Chop Saws and How to Choose One
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1DEWALT Chop SawDEWALT Chop Saw9.4/10View on Amazon
  2. 2Evolution S15CPS 15" Heavy-Duty Metal Cutting Chop SawEvolution S15CPS 15" Heavy-Duty Metal Cutting Chop Saw9.7/10View on Amazon

A pile of steel angle and a stack of trim boards ask for different saws, and the name on the box does not always say which one you hold. The types of chop saws on the market fall into families: the abrasive chop saw that grinds through steel, the cold cut saw that cuts it with a carbide blade, and the compound miter saw that cuts angles in wood and trim. This guide explains each family, what it cuts, and how to pick one.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Types of chop saws

A chop saw drops a spinning blade straight down through work clamped against a fence. What changes between families is the blade and the pivot: an abrasive disc that grinds, a carbide blade that cuts, or a wood blade on a pivoting arm that also swings for miters and tilts for bevels. The listings in this guide show all 3 with blade sizes from 7-1/4 inch to 15 inch and miter saw motors from 10 amp to 15 amp, plus 20V MAX cordless models.

Side by side

Abrasive chop saw Cold cut saw Compound miter saw
Blade Abrasive disc, 14 inch Carbide tipped blade, 8-1/4 inch to 15 inch Carbide blade, 7-1/4 inch to 12 inch
Cuts Steel angle, tube, and bar Steel, with less heat Wood, trim, steel, and plastic with the right blade
Heat and sparks Hot, with showers of sparks Cooler chips, less sparking Sawdust on wood, chips on metal
Angle cuts 45 degree pivoting fence 45 degree miter and bevel on the Evolution R210CMS Miter to 50 degrees, bevel to 48 degrees
Typical blade size 14 inch 14 inch 10 inch or 12 inch
Weight example Not stated 71.0 pounds Under 25 pounds to 51.7 pounds
Power 2300W 1200W (R210CMS) 10 amp to 15 amp, or 20V MAX
Best for Fast rough cuts in steel Cleaner cuts in steel Trim, framing, and angle cuts

Blade size is a rough guide to capacity: a 14 inch chop saw handles bigger steel than an 8-1/4 inch saw, and a 12 inch miter saw crosscuts wider boards than a 7-1/4 inch saw.

Abrasive chop saw

The abrasive chop saw is the classic steel saw: a 14 inch abrasive disc spins down through angle, tube, and bar, throwing sparks. The DEWALT D28730 (on Amazon) lists a 2300W motor with overload protection, a quick-lock vise for fast clamping on different size materials, and a 45 degree pivoting fence for angle cuts. The handle is shaped for a comfortable hand position.

Abrasive discs wear as they cut, and the cut runs hot, so this is the saw for fast rough cuts in steel, not for fine work or for wood. See the best chop saw blade for steel guide for blades that fit this family.

Cold cut saw

A cold cut saw, also sold as a dry cut saw, swaps the abrasive disc for a carbide tipped blade that cuts the steel, so the cut runs cooler and throws chips instead of a shower of sparks. The Evolution S15CPS (on Amazon) is a 15 inch saw that takes a 14 inch blade, and the listing says its EVOMAX blade delivers over 3,500 precise cuts. The saw weighs 71.0 pounds, has a soft start motor, and an E-Brake that stops the blade within 2-3 seconds after the trigger is released.

The smaller end of the family cuts more than steel. The Evolution R210CMS (on Amazon) is an 8-1/4 inch saw with a 1200W motor that the listing says cuts steel, aluminium, wood with embedded nails, and plastic with one blade, a 45 degree miter range, and a 0 degree to 45 degree bevel. It carries a 3 year limited warranty. See the dry cut saw vs abrasive chop saw comparison for how the two steel saws differ.

Compound miter saw

The compound miter saw is the wood saw of the family: the blade swings for miter cuts and tilts for bevel cuts, so one saw cuts trim, framing, and angles. The Skil MS6305-00 (on Amazon) is a 10 inch dual bevel sliding saw with a 15 amp motor that delivers 4,800 RPM, cuts 2×12 lumber at 90 degrees and 2×8 at 45 degrees, and swings to 50 degrees left and right with 11 positive stops.

Single bevel saws tilt mainly one way. The DEWALT DWS715 (on Amazon) is a 12 inch, 15 amp single bevel saw with 14 positive stops, a tall sliding fence that supports 5-1/2 inch base vertically, and bevels from 0 degrees to 48 degrees left and 0 degrees to 3 degrees right. It crosscuts 2 inch by 8 inch lumber at 90 degrees and 2 inch by 6 inch at 45 degrees. The 10 inch DWS713 follows the same pattern with a 4-1/4 inch base capacity and 2 inch by 6 inch lumber at 90 degrees.

Sliding compound miter saw

A sliding saw rides on rails, so the blade travels across the board and crosscuts wider stock than a fixed saw of the same blade size. The DEWALT DCS785B is a 12 inch double bevel sliding saw that runs on 20V MAX batteries and cuts up to 14 inch horizontally, with 6-1/2 inch baseboard standing up and 6-1/2 inch crown nested. The listing says it delivers up to 371 cuts in 3 1/4 inch MDF base molding and up to 153 cuts in 4 inch by 4 inch timber, captures up to 97% of dust, and weighs 51.7 lbs tool only.

Compact sliders trade capacity for weight. The Skil MS6306-00 is a 7-1/4 inch single bevel saw with a compact rail system, a 10 amp motor that delivers up to 4,800 RPM, and a weight under 25 lbs. It crosscuts up to 2×10 at 0 degrees, handles 3-1/2 inch crown moulding nested and 2×6 at 45 degrees, and miters from 0 to 47 degrees left and 0 to 50 degrees right. The DOVAMAN DMS01A is a 10 inch sliding saw with 2 speed settings at 5000 RPM and 3200 RPM, a 15 amp motor, 3 TCT blades, and a max cut of 3.5 by 13.4 inch. The DEWALT DCS361B is a cordless 7-1/4 inch saw that runs on 20V MAX, handles 3 5/8 inch nested crown and 3 1/2 inch base vertically, and weighs 30 lbs.

How to choose one

Match the saw to the material first. Steel angle, tube, and bar point to an abrasive chop saw or a cold cut saw; trim, framing, and crown point to a compound miter saw. Then check the cut capacity against the stock you cut most: a 12 inch miter saw listed at 2×8 lumber at 90 degrees is not the saw for 2×12 boards

  • Material. Steel needs an abrasive disc or a carbide metal blade; wood and trim take a wood blade or a multi-material blade.
  • Cut capacity. Check the crosscut at 90 degrees and at 45 degrees in the listing, plus the base and crown figures if you cut trim.
  • Angles. Check the miter range and the bevel range, and whether the saw bevels one way or both ways.
  • Power. Corded 15 amp saws plug in anywhere; 20V MAX cordless saws go where the work is.
  • Weight. A 71.0 pound chop saw stays on the bench; a saw under 25 lbs travels to the job.

Chop saw sparks and hot chips. An abrasive chop saw throws hot sparks, and a cold cut saw throws sharp chips, so clear anything flammable from the area, clamp the work, and let the blade reach full speed before it touches the metal. Wear eye and hearing protection, and let the blade stop before lifting it out of the cut.

FAQ for welders

What is the difference between a chop saw and a miter saw?

A chop saw drops a blade straight down through steel, usually an abrasive disc or a carbide metal blade. A miter saw swings for miter cuts and tilts for bevel cuts, and usually cuts wood and trim. Check the blade and the cut capacity in the listing, not the name alone.

Can a miter saw cut metal?

Some can, with the right blade. The Evolution R210CMS is a compound miter saw that the listing says cuts steel, aluminium, wood with embedded nails, and plastic with one multi-material blade. Match the blade to the material.

What size chop saw do I need?

The DEWALT D28730 is a 14 inch steel saw, and the 15 inch Evolution S15CPS takes a 14 inch blade. For wood, a 10 inch or 12 inch miter saw covers trim and framing. Match the blade size and the stated cut capacity to the stock you cut most.

Are cold cut saws better than abrasive chop saws?

They cut cooler and cleaner, with chips instead of a shower of sparks, and the S15CPS listing claims over 3,500 cuts per blade. For fast rough cuts in steel, an abrasive saw still does the job.

Do I need a sliding miter saw?

A slider crosscuts wider boards than a fixed saw with the same blade. The DEWALT DCS785B cuts up to 14 inch horizontally, and the DOVAMAN DMS01A cuts up to 3.5 by 13.4 inch. If you cut wide boards or crown, a slider earns its keep.

Related: best chop saw blade for aluminum, best cordless chop saw for job site, dry cut saw vs abrasive chop saw, chop saw vs horizontal band saw, and how to change a chop saw blade. Back to all metal fab tools.

More buying guides