Best Chop Saw Blade for Aluminum (2026): 5 Blades Compared
Five saw blades for aluminum compared by diameter, tooth count, arbor, stated max RPM and warranty, from 10-inch 120-tooth fine finish to a 14-inch low-RPM chop saw blade.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDiablo 12 in 96T blade9.5/10View on Amazon - 2
Best for Chop SawsEVOLUTION 14 in 80T blade9.5/10View on Amazon - 3
Best 100-ToothFOXBC 10 in 100T blade9.4/10View on Amazon - 4
Best 80-ToothFOXBC 10 in 80T blade9.4/10View on Amazon - 5
Best Fine FinishTOYAKI 10 in 120T blade9.4/10View on Amazon
Aluminum gums up the wrong blade and cuts clean with the right one, so the blade matters as much as the saw. This best chop saw blade for aluminum comparison covers five blades by diameter, tooth count, arbor, stated max RPM and warranty, from a 12-inch 96-tooth TCG blade to a 14-inch low-RPM chop saw blade and three 10-inch options.
Aluminum is soft, gummy and quick to grab, which is why a wood blade tears it and a proper non-ferrous blade slices it. The five blades below are all stated for aluminum, and they are scored on what their listings actually publish: tooth count and grind, diameter and arbor, a stated max RPM where one exists, and warranty, which none of them states as a term.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Affiliate disclosure.
Quick picks
- Best Overall Diablo 12 in 96T blade: 12 in 96-tooth TCG blade with a -5 degree hook angle, 5000 max RPM and a non-stick coating. Check price on Amazon
- Best for Chop Saws EVOLUTION 14 in 80T blade: 14 in 80-tooth blade designed for low RPM saws, max 1600 RPM, fitting named chop saw models. Check price on Amazon
- Best 100-Tooth FOXBC 10 in 100T blade: 10 in 100-tooth TCG blade for thin to thick aluminum with a 5/8 in arbor. Check price on Amazon
- Best 80-Tooth FOXBC 10 in 80T blade: 10 in 80-tooth TCG blade with laser-cut stabilizer vents and a 5/8 in arbor. Check price on Amazon
- Best Fine Finish TOYAKI 10 in 120T blade: 10 in 120-tooth blade for ultra-fine finish work with a 5/8 in arbor. Check price on Amazon
The machines

Diablo Saw Blade - 12" Diameter, 96 TCG Teeth
A 12 in 96-tooth TCG saw blade for aluminum with a -5 degree hook angle, 1 in arbor and 5000 max RPM.
Pros
- 96 TCG teeth with -5 degree hook angle stated
- 5000 max RPM stated
- Perma-SHIELD non-stick coating stated
- Tri-metal shock-resistant brazing stated
Cons
- Warranty stated with no term
- 1 in arbor only

Evolution 14BLADEAL14" 80T Aluminum Blade TCT Saw
A 14 in 80-tooth aluminum blade for low RPM saws with a 1 in arbor and 1600 max RPM.
Pros
- Designed for low RPM chop saws stated
- Fits named saw models listed
- 80 carbide teeth, 0.094 in kerf stated
- 1.6 lb stated weight
Cons
- Max 1600 RPM, not for high RPM saws
- No Warranty stated
- 14 in only
- 1 in arbor only

FOXBC 10-Inch Saw Blade 100-Tooth TCG for Aluminum
A 10 in 100-tooth TCG blade for aluminum with a 5/8 in arbor, stated for thin to thick stock.
Pros
- 100 TCG teeth for finer cuts
- States thin, medium and thick aluminum ranges
- Laser-cut stabilizer vents stated
- Tungsten carbide teeth stated
Cons
- No max RPM stated
- No warranty term is stated
- 5/8 in arbor only
- 0.8 kg stated weight

FOXBC 10-Inch Saw Blade 80-Tooth TCG for Aluminum
A 10 in 80-tooth TCG blade for aluminum and non-ferrous metal with a 5/8 in arbor and stabilizer vents.
Pros
- 80 TCG teeth, faster cutting than 100T
- Laser-cut stabilizer vents stated
- Stated 0.094 in kerf
- Wide saw compatibility stated
Cons
- No max RPM stated
- No warranty term is stated
- 5/8 in arbor only
- 0.78 kg stated weight

10-Inch Miter Saw Blade, TCG Aluminum Working
A 10 in 120-tooth blade for aluminum with a 5/8 in arbor, stated for ultra-fine finish work.
Pros
- 120 teeth, the finest pitch here
- 2.8 mm thickness stated
- 5/8 in arbor fits common saws
- 1.5 lb stated weight
Cons
- No max RPM stated
- No warranty term is stated
- Thin listing with few details
- No kerf stated
Other welders and gear to compare
FOXBC 12 Inch Saw Blade 96-Tooth TCG for Aluminum Non-FerrousCheck price on Amazon
VEVOR Chop SawCheck price on Amazon
VEVOR Chop Saw 14-inch Cold Cut Blade 2800 W Powerful MotorCheck price on Amazon
VEVOR Compound Miter SawCheck price on Amazon
FOXBC 14 Inch Metal Steel Cutting Saw Blade 72 Tooth forCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Diameter | Teeth | Arbor | Max RPM (stated) | Warranty (stated) |
|---|---|---|---|---|---|---|
| Diablo 12 in 96T blade | 9.5/10 | 12 in | 96 TCG | 1 in | 5000 | Warranty (no term) |
| EVOLUTION 14 in 80T blade | 9.5/10 | 14 in | 80 | 1 in | 1600 | No Warranty |
| FOXBC 10 in 100T blade | 9.4/10 | 10 in | 100 TCG | 5/8 in | Not stated | Not stated |
| FOXBC 10 in 80T blade | 9.4/10 | 10 in | 80 TCG | 5/8 in | Not stated | Not stated |
| TOYAKI 10 in 120T blade | 9.4/10 | 10 in | 120 | 5/8 in | Not stated | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 20 October 2026. Only two listings state a max RPM, and none states a warranty term.
Buying guide: choosing the best chop saw blade for aluminum
Tooth count and grind
More teeth mean a finer cut and slower feed. The TOYAKI leads at 120 teeth for ultra-fine finish, the FOXBC 100-tooth sits in the middle, the FOXBC 80-tooth cuts faster, and the EVOLUTION 80-tooth is the chop saw size. The Diablo’s 96 teeth use a triple chip grind, stated for clean, burr-free finishes; both FOXBC blades also state TCG geometry. For thin aluminum, more teeth; for thick stock, fewer.
Diameter and arbor
Match both to the saw. Diameters here are 10, 12 and 14 inches; arbors are 5/8 in on the 10-inch blades and 1 in on the 12 and 14-inch blades. A blade that does not match the arbor does not mount, and a blade larger than the saw’s rating does not belong on it. The 5/8 in arbor is stated as standard for most common 10-inch saws.
Max RPM: the safety number
Only the Diablo (5000) and the EVOLUTION (1600) state a max RPM. Never run a blade above its stated max, and note the EVOLUTION is designed for low RPM saws: it belongs on a dry-cut chop saw, not a high-speed circular saw. The three 10-inch listings state no max RPM, so confirm the rating before mounting one on a fast saw.
Kerf and plate
Stated kerfs run 0.094 to 0.095 in on the FOXBC blades and 0.094 in on the EVOLUTION; the Diablo listing states its own kerf and plate figures, and the TOYAKI states a 2.8 mm thickness. Thinner kerfs remove less material and load the saw less; the hook angle is stated only on the Diablo.
What the listings leave out
No listing here states a warranty term: the Diablo table says only Warranty, the EVOLUTION table says No Warranty, and the rest say nothing. The Diablo spec table also lists plastic as the material type and 4.8 ounces as the weight, both of which contradict the blade the title and bullets describe; the guide trusts the title and bullets. Weights that are stated run from 0.78 kg to 1.6 lb across the group.
Chop saw, miter saw or table saw
The keyword says chop saw, but the listings cover three saw types, so buy for the saw you own. The EVOLUTION 14-inch is the true chop saw blade here, designed for low RPM dry-cut chop saws with named model compatibility. The Diablo 12-inch lists circular saw compatibility. Both FOXBC blades and the TOYAKI state miter, slide miter and table saw compatibility, with DeWalt, Skil, Metabo and Makita named. A blade that fits the saw type and arbor is the first filter; everything else is second.
Aluminum thickness ranges
Only the FOXBC 100-tooth states thickness ranges: thin aluminum up to 1/8 in, medium from 3/32 to 1/4 in, and thick from 3/16 to 7/16 in. That makes it the pick when the stock varies. The other listings state no thickness guidance, so match tooth count to the job: the 120-tooth TOYAKI for thin sheet and fine edges, the 80-tooth options for faster cutting in thicker stock.
The Diablo spec table, read carefully
The Diablo listing deserves a second look because its spec table fights its own title. The title and bullets describe a 12-inch aluminum-cutting blade with 96 TCG teeth, a -5 degree hook and 5000 max RPM, but the spec table lists the material type as plastic and the item weight as 4.8 ounces. A 12-inch carbide blade at under 5 ounces is implausible, and plastic is simply wrong for this blade. This guide trusts the title and bullets over the spec table, and the table’s oddities cost the listing on build scoring.
Noise and vibration
Both FOXBC blades state laser-cut stabilizer vents that trap noise and reduce vibration for accuracy and durability. On a miter saw cutting aluminum extrusions all afternoon, less vibration means a steadier cut and less fatigue. The other three listings state no vibration control, which is normal for blades at this level but worth noting when two picks do state it.
What kerf should I choose?
Stated kerfs here are 0.094 in on the EVOLUTION and FOXBC 80-tooth, and 0.095 in on the FOXBC 100-tooth; the Diablo states its own kerf in its listing and the TOYAKI states a 2.8 mm thickness instead. The differences are small, and the stated kerfs sit in the same thin-kerf class that keeps the saw load light. Do not overthink it: pick by teeth, arbor and max RPM first, and let the kerf follow.
Speed ratings and saw matching
Two numbers decide whether a blade suits your saw: the arbor and the max RPM. The 10-inch blades all use a 5/8 in arbor, stated as standard for most common 10-inch saws, while the 12 and 14-inch blades use a 1 in arbor. On speed, the Diablo states 5000 max RPM and the EVOLUTION states 1600 max for low RPM saws; the other three state no max RPM at all. A blade with no stated max RPM is not automatically unsafe, but the guide cannot score what is not stated, and you should confirm the rating with the maker before spinning it on a fast saw.
Coatings and vents
The Diablo states a Perma-SHIELD non-stick coating against heat, gumming and corrosion, plus tri-metal shock-resistant brazing. Both FOXBC blades state laser-cut stabilizer vents to trap noise and reduce vibration. These are maker-stated extras, not essentials, but they separate the detailed listings from the thin ones.
[wgl_safety kind=”tool”]
Before You Strike an Arc
- Match the blade diameter and arbor to the saw: 10 in with 5/8 in arbor, 12 and 14 in with 1 in arbor here.
- Check the stated max RPM against the saw: the EVOLUTION is for low RPM saws only, max 1600.
- Confirm the blade is rated for aluminum and non-ferrous metal before the first cut.
- Wear eye and hearing protection and clamp the work; aluminum chips are sharp and hot.
FAQ for welders
Can I cut aluminum with a chop saw?
Yes, with a blade made for it, like the EVOLUTION 14-inch here, which is designed for low RPM chop saws. Use a non-ferrous blade, clamp the work, and never use an abrasive wood blade on aluminum.
How many teeth do I need for aluminum?
These picks range from 80 to 120 teeth. More teeth give a finer finish; the 120-tooth TOYAKI is the finest here, while the 80-tooth options cut faster. The FOXBC 100-tooth states ranges for thin, medium and thick aluminum.
What is TCG?
Triple chip grind, a tooth geometry the Diablo and both FOXBC listings state for clean, burr-free cuts with long blade life on aluminum and non-ferrous metals.
Does arbor size matter?
Yes. The 10-inch blades here use a 5/8 in arbor and the 12 and 14-inch blades use a 1 in arbor. The blade must match the saw’s arbor to mount safely.
Do any of these have a warranty?
None states a usable term. The Diablo table says only Warranty, the EVOLUTION table says No Warranty, and the others state nothing.
Scoring, line by line
Each blade is scored on performance, build, value, safety and warranty, using only what the listing publishes. Safety reflects a stated max RPM; the Diablo and EVOLUTION state one. The weights are on our How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Diablo 12 in 96T blade | 9.5 | 30 | 21 | 20 | 3 | 0 |
| EVOLUTION 14 in 80T blade | 9.5 | 29 | 21 | 19 | 3 | 0 |
| FOXBC 10 in 100T blade | 9.4 | 28 | 20 | 20 | 0 | 0 |
| FOXBC 10 in 80T blade | 9.4 | 28 | 20 | 19 | 0 | 0 |
| TOYAKI 10 in 120T blade | 9.4 | 27 | 19 | 19 | 0 | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.
More welding guides
See the best chop saw blade for steel, best cut off wheel for aluminum, chop saw vs horizontal band saw and dry cut saw vs abrasive chop saw. For the saw itself, see the best metal chop saw for home shop.




