Types of Band Saws: Vertical, Horizontal and Portable
Vertical benchtop, horizontal and vertical metal, and portable handheld band saws compared by capacity, blade speed, table and motor, with figures from real listings.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
WORKPRO 8-Inch Metal File Set9.7/10View on Amazon - 2
KUZURYU 31PCS Metal File Set9.7/10View on Amazon - 3
Cobalt Drill Bit Set9.6/10View on Amazon
Types of band saws split by how the blade meets the work: upright on a bench, flat in a frame that feeds itself, or handheld for cuts out in the field. The shape decides what the saw cuts well, how straight it cuts, and how much floor space it needs. This guide explains each type, with capacities and speeds taken from real listings, so the choice follows the work on the bench.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The types in one paragraph
A vertical benchtop saw stands the blade upright over a tilting table and suits curves and straight cuts in wood and light metal. A horizontal metal saw lays the blade flat, clamps the stock in a vise and feeds itself through the cut, with some models turning upright for contour work. A portable handheld saw carries the blade to the stock for pipe, tubing and rebar on site. Blade speed, table size and cutting capacity separate them, and the listings below show the range.
Side by side
| Vertical benchtop | Horizontal / vertical metal | Portable handheld | |
|---|---|---|---|
| Typical work | Curves and straight cuts in wood and light metal | Straight and angled cuts in metal stock | Pipe, tubing and rebar on site |
| Cutting capacity | 3-1/2 in deep, 9 in wide (WEN BA3959) | 7 x 8.25 in rectangular (VEVOR) | 5 in round stock (VEVOR) |
| Blade speed | Up to 2500 feet per minute | 80, 120 or 200 feet per minute | 137.8-472.4 ft/min |
| Table or support | 12-1/4 x 11-7/8 in table, bevels to 45 degrees | 9 x 12 in infeed table, vise mitering | Handheld, no table |
| Motor | 2.8-amp motor | 3/4 HP motor | 10 amp, 1100W motor |
| Blade | 59-1/2 in blades, 1/8 to 3/8 in | 93 in blade, 5/8 TPI | Bi-metal blade |
| Warranty | 2-year warranty | 2-year warranty | Not stated |
Blade speeds are manufacturer rated as listed. Metal cutting runs slower than wood cutting: the WEN BA4664 (on Amazon) lists 80, 120 or 200 feet per minute, while the WEN BA3959 benchtop (on Amazon) lists up to 2500 feet per minute.
Vertical benchtop band saws
The benchtop vertical saw is the home shop staple. The WEN BA3959 runs a 2.8-amp motor at up to 2500 feet per minute, cuts up to 3-1/2 inches deep and 9 inches wide, and takes 59-1/2-inch blades from 1/8 to 3/8 inches, on a 12-1/4 x 11-7/8-inch table that bevels up to 45 degrees. The Hoteche 7-1/2-inch saw (on Amazon) runs a 3-amp motor with a no-load speed of 14.7 m/s, cuts 3.2 inches deep and 7.5 inches wide, and ships with a 56-inch x 1/4-inch blade at 6 teeth per inch. The VEVOR 10-inch benchtop saw (on Amazon) runs two speeds, 560 and 1100 RPM, from a 370W 1/2 HP motor, with a cutting height of 6 inches and a throat width of 9.65 inches. The Bucktool 5-inch benchtop metal saw runs a 1.5 HP 10A motor with speeds from 137 to 472 FPM, a 5-inch cutting capacity and a work table of 13-3/8 x 9-5/8 inches that expands to 13-3/8 x 11-3/4 inches. Our best band saw blade for metal guide covers blades for these saws, and band saw blade sizes explains length and width.
Horizontal and vertical metal band saws
Metal cutting saws run slower and feed themselves. The WEN BA4664 works in vertical and horizontal positions, with blade speeds of 80, 120 or 200 feet per minute, a mitering vise for cuts from 0 to 45 degrees, a stand with wheels and a 4.6 amp motor. The JET HVBS-712D (on Amazon) is a 7 x 12 inch horizontal and vertical saw with a 3/4 HP motor on 115/230V, a quick-lock vise with preset mitering at 15, 30 and 45 degrees, a 9 x 12 inch infeed table and CSA/CUS certification. The VEVOR 7 x 8.25 inch saw runs a 1.1 kW motor at 1680 RPM on 110/220V, with four speeds of 86, 132, 178 and 260 FPM and a 93 inch blade at 5/8 TPI. See our best horizontal band saw guide for scored picks, and horizontal vs vertical metal band saw for the head-to-head.
Portable handheld band saws
A portable saw goes to the work instead of the other way around. The VEVOR portable saw cuts 5 inch round stock and 4.7 x 4.7 inch rectangular stock without its base, and 3.93 inch round stock with the base fitted, from a 1100W 10 amp motor with speeds from 137.8 to 472.4 ft/min. Its bi-metal blade changes without tools, using a tool-free blade changing lever, and the saw fits metal, steel, aluminum and composite cable. Our best portable band saw for metal guide scores four picks for shop and field, and chop saw vs band saw for metal compares the portable saw with a chop saw.
How to choose among the types of band saws
Start with the stock: long bar and tube suit a horizontal saw with a vise, while sheet and curved work suit a vertical saw with a table. Check the cutting capacity against the stock: the VEVOR portable saw takes 5 inch round stock, the Bucktool takes a 5-inch capacity, and the JET takes a 7 x 12 inch size. Check blade speed against the metal: the WEN BA4664 lists 80, 120 or 200 feet per minute, and the VEVOR 7 x 8.25 inch saw lists 86, 132, 178 and 260 FPM. Check the table too: the WEN BA3959 table measures 12-1/4 x 11-7/8 inches, and the VEVOR 10-inch saw table measures 13.39 x 13.19 inches. For blade help, see our band saw blade speed chart and how to sharpen band saw blades guide.
Band saw safety. Wear eye and face protection, clamp the work before cutting, keep guards in place and keep gloves away from rotating parts. The VEVOR 7 x 8.25 inch saw includes an emergency stop button and automatic shut-off after the cut, and the WEN BA4664 shuts off automatically after a cut. See the OSHA machine guarding guidance for shop machines.
FAQ for welders
What is the difference between a vertical and a horizontal band saw?
A vertical saw stands the blade upright over a table and the operator feeds the work by hand, which suits curves and shaped cuts. A horizontal saw lays the blade flat, clamps the stock in a vise and feeds itself, which suits straight cuts in bar, tube and pipe.
Can a band saw cut metal?
Yes, with the right blade and speed. The VEVOR portable saw cuts metal, steel, aluminum and composite cable with a bi-metal blade at 137.8 to 472.4 ft/min, the WEN BA4664 lists blade speeds of 80, 120 or 200 feet per minute for a variety of metals, and the Bucktool saw cuts metal at 137 to 472 FPM.
What blade speed suits metal cutting?
Metal cutting runs slower than wood cutting. The WEN BA4664 lists 80, 120 or 200 feet per minute, the VEVOR 7 x 8.25 inch saw lists 86, 132, 178 and 260 FPM, and the Bucktool lists 137 to 472 FPM. Match the speed to the metal using the band saw blade speed chart.
What size band saw do I need for metal stock?
Match the capacity to the stock. The VEVOR portable saw takes 5 inch round stock, the VEVOR 7 x 8.25 inch saw takes 7 x 8.25 inch rectangular stock, and the JET HVBS-712D is a 7 x 12 inch saw. Check the capacity in the listing before buying.
Do band saws need a stand?
It depends on the saw. The WEN BA3959 benchtop saw sits on a bench, while the VEVOR 10-inch benchtop saw includes a metal stand. Larger metal saws include a stand too: the WEN BA4664 includes a stand with wheels, and the JET HVBS-712D has a stand with a built-in storage cabinet and four 8-inch rubber wheels.
Related: best horizontal band saw, best portable band saw for metal, chop saw vs band saw for metal, and the metal fab tools hub. Also see our band saw blade sizes.




