Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Band Saw Blade Sizes: Width and Length Chart (2026)

Band saw blade sizes explained by length, width, thickness and TPI, with 4 bi-metal blades in 64-1/2, 93 and 93-1/2 in lengths for metal cutting.

Band Saw Blade Sizes: Width and Length Chart (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1FOXBC 93" X 3/4" X 10/14 TPI Metal CuttingFOXBC 93" X 3/4" X 10/14 TPI Metal Cutting9.6/10View on Amazon
  2. 2Imachinist S9312121014 Bi-Metal Band Saw BladesImachinist S9312121014 Bi-Metal Band Saw Blades9.6/10View on Amazon
  3. 3FOXBC 64-1/2 Inch Bi-Metal Bandsaw Blade MetalFOXBC 64-1/2 Inch Bi-Metal Bandsaw Blade Metal9.6/10View on Amazon
  4. 4Imachinist S6412121418 Bi-Metal Band Saw BladesImachinist S6412121418 Bi-Metal Band Saw Blades9.5/10View on Amazon

Band saw blade sizes come down to length, width, thickness and teeth per inch. Length must match the saw, width suits the cut, thickness follows the wheels, and TPI suits the metal. Get length wrong and the blade will not fit the saw; get the rest wrong and the cut suffers.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

FOXBC 93" X 3/4" X 10/14 TPI Metal Cutting

FOXBC 93" X 3/4" X 10/14 TPI Metal Cutting

FOXBC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Bi-metal M42 blade, 93 in x 3/4 in, 10/14 TPI, 0.035 in, 8% cobalt, 2% tungsten.

Pros

  • Widest blade here at 3/4 in
  • M42 teeth with 8% cobalt and 2% tungsten
  • Rc 66-68 tooth hardness stated
  • Electron beam welded tooth point

Cons

  • No warranty term is stated
  • One blade per listing
  • Claims it outlasts conventional blades up to 3 times, with no basis stated
Imachinist S9312121014 Bi-Metal Band Saw Blades

Imachinist S9312121014 Bi-Metal Band Saw Blades

Imachinist9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Bi-metal M42 blade, 93-1/2 in x 1/2 in, 10/14 TPI, 0.025 in, spring steel backing.

Pros

  • Recommended speed of 100 to 300 FPM for ferrous metals
  • Spring steel backing stated
  • Variable 10/14 TPI for pipe and tube profiles
  • M42 grade with 8% cobalt

Cons

  • No warranty term is stated
  • Limited to soft ferrous metal
  • One blade per listing
  • No tooth hardness is stated
FOXBC 64-1/2 Inch Bi-Metal Bandsaw Blade Metal

FOXBC 64-1/2 Inch Bi-Metal Bandsaw Blade Metal

FOXBC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Bi-metal M42 blade, 64-1/2 in x 1/2 in, 10/14 TPI, 0.02 in, for 6 in x 4 in saws.

Pros

  • Lists the saws it fits, including WEN 3970 and Grizzly G0622
  • M42 grade with 8% cobalt
  • Recommended for mild steel, aluminum and stainless
  • Fits most 6 in x 4 in band saws

Cons

  • No warranty term is stated
  • Weight is not stated
  • One blade per listing
Imachinist S6412121418 Bi-Metal Band Saw Blades

Imachinist S6412121418 Bi-Metal Band Saw Blades

Imachinist9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Bi-metal M42 blade, 64-1/2 in x 1/2 in, 14/18 TPI, 0.025 in, for carbon mild steel.

Pros

  • 14/18 TPI for thin pipe and tube profiles
  • Recommended speed of 100 to 300 FPM for ferrous metals
  • M42 tooth edge with 8% cobalt
  • High quality welded joint stated

Cons

  • Not for non-ferrous metal such as aluminum
  • No warranty term is stated
  • One blade per listing
  • No tooth hardness is stated

Length: match the saw

Length is the measurement the saw dictates: a blade that is too long will not tension, and one that is too short will not reach the wheels. The listings here state 93 in, 93-1/2 in and 64-1/2 in blades, and each listing states the length and width the saw must take.

Width: straight cuts and curves

Width is the height of the blade from tooth to back edge, and the blades here are 3/4 in and 1/2 in wide. A wider blade tracks straighter on long cuts, while a narrower blade turns tighter curves.

Thickness: match the wheels

The listings here state thicknesses of 0.02, 0.025 and 0.035 in. Watch the spec tables: the FOXBC 93 in table lists 0.039 in where the bullets list 0.035 in, and the FOXBC 64-1/2 in table lists 0.024 in where the bullets list 0.02 in.

TPI: teeth per inch and the metal

TPI counts the teeth in each inch of blade, and the blades here are 10/14 and 14/18 TPI, each variable pitch. The FOXBC 10/14 TPI blades are recommended for aluminum, mild steel and tougher steels including stainless. The Imachinist 10/14 TPI blade is for soft ferrous metal and suits pipe and tube profiles. The 14/18 TPI blade suits thin pipe and tube in carbon mild steel, and its listing says do not cut any non-ferrous metal like aluminum with it. The Imachinist listings state a recommended blade speed of 100 to 300 FPM for ferrous metals.

Bi-metal blades for the job

The blades below cover the lengths, widths, thicknesses and TPI in the sections above: match the length to the saw, then pick width and TPI for the metal.

Common mistakes to avoid

  • Buying a 93 in blade for a saw that takes 93-1/2 in.
  • Cutting aluminum with the 14/18 TPI blade.
  • Trusting the spec table thickness over the bullets.
  • Picking by TPI alone, without matching the length.

Band saw blade sizes: the short version

  1. Match the length to the saw: 93 in, 93-1/2 in or 64-1/2 in here.
  2. Pick the width for the cut: 3/4 in or 1/2 in here.
  3. Check the thickness in the bullets: 0.02, 0.025 or 0.035 in here.
  4. Pick TPI for the metal: 10/14 for soft ferrous metal and pipe and tube profiles, 14/18 for thin ferrous tube.

FAQ for welders

What length band saw blade do I need?

The length the saw requires: the listings here state 93 in, 93-1/2 in and 64-1/2 in blades, and each listing states the length and width the saw must take.

What does 10/14 TPI mean?

It is a variable pitch: the tooth spacing varies along the blade, across the 10/14 TPI range.

Can a 14/18 TPI blade cut aluminum?

Not this one. The Imachinist 64-1/2 in listing says do not cut any non-ferrous metal like aluminum with its 14/18 TPI blade. For aluminum, the FOXBC listings recommend their 10/14 TPI blades.

How thick is a band saw blade?

The listings here state 0.02, 0.025 and 0.035 in. The FOXBC 93 in bullets state 0.035 in while its spec table lists 0.039 in, so trust the bullets.

Related: the metal fab tools hub, best hand held band saw, bi-metal vs carbon steel hacksaw blade and steel sheet metal gauge chart.

More buying guides

Metal Fab Tools ·

Types of Band Saw Blades and How to Choose

Band saw blades differ by tooth count, width, length and material, and this guide explains each type with figures from real listings so the…