Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Bi-Metal vs Carbon Steel Hacksaw Blade: Which One Should You Buy?

Two bi-metal hacksaw blade packs and one carbon steel pack compared on pitch, material, pack size and storage, and on what each listing leaves unclear.

Bi-Metal vs Carbon Steel Hacksaw Blade: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1HAUTMEC 12" Bi-Metal Hacksaw Blades SetHAUTMEC 12" Bi-Metal Hacksaw Blades Set9.7/10View on Amazon
  2. 2JUGREAT 12" Hacksaw Blades ReplacementJUGREAT 12" Hacksaw Blades Replacement9.6/10View on Amazon
  3. 3Hanpex Hacksaw Replacement Blades (10 Pack)Hanpex Hacksaw Replacement Blades (10 Pack)9.5/10View on Amazon

Verdict. Bi-metal vs carbon steel hacksaw blade: pick a bi-metal pack for high-speed steel on a flexible spring steel back or body, and pick the carbon steel pack for its single 24 TPI pitch and stated fit for all 12 inch frames. Pitch, storage and unclear figures matter more than the side label alone.

Cutting a pipe or a rod on the bench starts with a blade that fits the frame and matches the metal in front of you. This comparison puts bi-metal vs carbon steel hacksaw blade packs side by side on what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Affiliate disclosure.

The blades

HAUTMEC 12" Bi-Metal Hacksaw Blades Set

HAUTMEC 12" Bi-Metal Hacksaw Blades Set

HAUTMEC9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Suits a reader who wants a choice of pitch in one pack with a storage case; skip it if you want a single-pitch pack only.

Pros

  • 18, 24 and 32 TPI options, with 4 blades of each pitch
  • High-speed steel teeth welded to a flexible spring steel back
  • White anti-rust coating stated for corrosion resistance
  • Plastic storage case included for transport and protection

Cons

  • Pack mixes all three pitches, so no single-pitch pack is stated
  • Longer life claimed against carbon steel, with no life figure
  • No blade weight is stated in the listing
  • No warranty term is stated in the listing
JUGREAT 12" Hacksaw Blades Replacement

JUGREAT 12" Hacksaw Blades Replacement

JUGREAT9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Suits a reader who wants a single 18 TPI bi-metal pack for general metal cutting; skip it if you want a choice of pitch.

Pros

  • 18 TPI in a standard 12 inch by 1/2 inch size
  • Spring steel body with high-speed steel stated
  • Shatter-proof and flexible construction stated
  • Wide cutting list stated, including wood, PVC, copper tube and rebar

Cons

  • Only 18 TPI is stated, with no other pitch option
  • No storage case is stated in the listing
  • No warranty term is stated in the listing
Hanpex Hacksaw Replacement Blades (10 Pack)

Hanpex Hacksaw Replacement Blades (10 Pack)

Hanpex9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Suits a reader who wants a single 24 TPI carbon steel pack for the metals named in its listing; skip it if you want a choice of pitch.

Pros

  • 24 TPI high carbon steel blades with wavy teeth stated
  • Flexible and shatterproof construction stated
  • Universal fit stated for all 12 inch hacksaw frames
  • Cutting list stated, including soft steel pipes, cast iron rods and aluminum brackets

Cons

  • Only 24 TPI is stated, with no other pitch option
  • No storage case is stated in the listing
  • No warranty term is stated in the listing

Other welders and gear to compare

Side by side

HAUTMEC Bi-Metal Hacksaw Blades JUGREAT Bi-Metal Hacksaw Blades Hanpex Carbon Steel Hacksaw Blades
Gear Score 62 56 55
TPI 18, 24, 32 18 24
Length 12 inches 12 inches 12 inches
Pack 12 10 10
Material Bi-metal: high-speed steel teeth, spring steel back Bi-metal: spring steel body, high-speed steel High carbon steel
Storage Plastic storage case Not stated Not stated

Ratings in this table are the makers’ own claims taken from each product page (2 November 2026). No listing states a warranty term or a formal safety standard.

bi-metal vs carbon steel hacksaw blade: what differs

Bi-metal, as these listings describe it, means high-speed steel teeth joined to a spring steel back or body. Carbon steel, as the Hanpex listing describes it, means high carbon steel blades with wavy teeth. That material difference does not by itself decide pitch or storage, which differ pack by pack.

Teeth and pitch

The HAUTMEC pack is the only pack here with a pitch choice, at 18 TPI for fast cutting, 24 TPI for balanced performance and 32 TPI for smoother and cleaner cuts. The JUGREAT pack lists 18 TPI only. The Hanpex pack lists 24 TPI only. Pitch choice therefore belongs to one pack, not to the whole bi-metal side.

Materials and flex

Both bi-metal listings state a flexible spring steel body or back, with shatter-proof or shatter-resistant construction. The Hanpex listing also states flexible, shatterproof construction. Flex and shatter resistance are stated on both sides, so they do not divide the sides. Tooth material differs: high-speed steel on the bi-metal packs, and high carbon steel teeth on the Hanpex pack.

Size and fit

All three packs list a length of 12 inches. The bi-metal packs list a width of 1/2 inch and a thickness of 0.025 inch in their bullets, while their spec tables give a different third dimension. The Hanpex listing states a universal fit for all 12 inch hacksaw frames, and the HAUTMEC listing states a fit for most full-size hacksaw frames.

Pack and storage

The HAUTMEC pack holds 12 blades, with 4 of each pitch, inside a plastic storage case. The JUGREAT pack holds 10 blades, with no storage case stated. The Hanpex pack holds 10 blades, with no storage case stated. Storage is a pack difference, not a side difference.

Choose the HAUTMEC pack if

  • You want pitch choice in one pack.
  • You want a storage case included.
  • You cut the mix of materials named in its listing.

Choose the JUGREAT pack if

  • You want a single 18 TPI pack.
  • You want a standard size pack for general cutting.
  • You do not need a stated storage case.

Choose the Hanpex pack if

  • You want a single 24 TPI pack.
  • Your list centers on the metals named in its listing.
  • You want a stated fit for all 12 inch frames.

Before You Cut

  • Check the stated frame fit before ordering, since all three packs list 12 inches.
  • Check the pitch against the material you plan to cut, using the HAUTMEC pitch labels where a choice exists.
  • Check the pack count and whether a case is stated, since only one pack names a case.
  • Check the bullet thickness figure where a spec table differs.

FAQ for welders

Which side lasts longer?

The HAUTMEC listing claims its bi-metal blades outlast conventional carbon steel blades, but it gives no life figure to check. The Hanpex listing claims longer life and sharper teeth with no baseline figure, so the listings do not settle the life question.

Does pitch choice matter here?

The HAUTMEC listing labels its pitches for fast cutting, balanced performance and smoother and cleaner cuts. The other two packs each list a single pitch, so pitch choice is a pack point, not a side point.

Will these blades fit my hacksaw frame?

The HAUTMEC listing states a fit for most full-size hacksaw frames. The Hanpex listing states a fit for all 12 inch hacksaw frames. The JUGREAT listing states a standard size, with no frame fit claim stated.

Is there a warranty on these blades?

No listing states a warranty term, so warranty plays no part in choosing among these packs. Check the listing before ordering if a warranty term matters to you.

Related: best hacksaw blades, best 32 TPI hacksaw blade, steel pipe cutter vs hacksaw, and the metal fab tools hub.

Scoring, line by line

Each pack is scored on performance, build, value, safety and warranty, with weights on the How we pick page. No listing states a warranty term or a formal safety standard, so safety and warranty score 0 for all three packs.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
HAUTMEC Bi-Metal Hacksaw Blades 9.7 32 22 21 n/a 0
JUGREAT Bi-Metal Hacksaw Blades 9.6 28 20 20 n/a 0
Hanpex Carbon Steel Hacksaw Blades 9.5 27 20 20 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides