Best Hacksaw Blade for Stainless Steel (2026): 5 Bi-Metal Picks
Five 12 inch hacksaw blades for stainless steel and general metal cutting, compared on TPI, tooth material, stated thickness, pack size and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Stainless PickGRAFF 8% Cobalt 24 TPI9.6/10View on Amazon - 2
Named ProcessStarrett KBS12242 24 TPI9.6/10View on Amazon - 3
Finest PitchLenox 20162T232HE 32 TPI9.5/10View on Amazon - 4
Bulk PackJUGREAT 24 TPI 10-Pack9.4/10View on Amazon
A stainless bracket needs trimming, a bolt is too long for its hole, and the chop saw is across the shop. A hacksaw with the right blade handles the job without heat or sparks. This guide to the best hacksaw blade for stainless steel compares five listings on what each one states: tooth pitch, tooth material, blade thickness, pack size and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Stainless Pick GRAFF 8% Cobalt 24 TPI: The only listing that names stainless steel, with 8% cobalt bi-metal teeth. Check price on Amazon
- Named Process Starrett KBS12242 24 TPI: Starrett’s patented diffusion process, listed for interrupted cuts and bending stresses. Check price on Amazon
- Finest Pitch Lenox 20162T232HE 32 TPI: 32 TPI, the finest pitch here, with shatter resistant bi-metal construction. Check price on Amazon
- Bulk Pack JUGREAT 24 TPI 10-Pack: A stated 10-pack of 24 TPI blades with wavy set teeth, the most blades per listing. Check price on Amazon
The machines

GRAFF 8% Cobalt Premium Hacksaw Blades 12 Inch
A 12 inch (300 mm) bi-metal blade with 8% cobalt teeth, the only listing here that names stainless steel.
Pros
- The only listing that names stainless steel
- 8% cobalt teeth stated for abrasion resistance
- Bends without losing working qualities, per the maker
- Stated 0.62 mm thickness
Cons
- Pack count is muddled: 1 count, 3 packs, 3 items
- No warranty term is stated
- Listing labels the 0.62 mm thickness figure inconsistently

Starrett Hacksaw Blade, 12" Length, 1/2" Width
A 12 inch bi-metal blade, 24 TPI, in a 2-pack, with the maker's patented solid state diffusion process.
Pros
- Patented solid state diffusion process stated
- Listed for interrupted cuts and bending or twisting stresses
- Stated 0.024 inch thickness
- 2-pack for contractors and tradesmen
Cons
- No warranty term is stated
- The most advanced and Best Performance lines are marketing, not specs

LENOX Tools Hacksaw Blade, 12-inch, 32 TPI
A 12 inch bi-metal blade with the finest pitch here, 32 TPI, in a 2-pack.
Pros
- 32 TPI, the finest pitch in this guide
- Up to 100% longer blade life claim versus the prior generation
- Shatter resistant bi-metal that bends and flexes, per the maker
- Copper hardened steel stated
Cons
- No warranty term is stated
- The life claim is against the maker's own prior generation, not rivals

LENOX Tools Hacksaw Blade, 12-Inch, 24 TPI
A 12 inch bi-metal blade, 24 TPI, in a 2-pack, with the maker's shatter resistant construction.
Pros
- Up to 100% longer blade life claim versus the prior generation
- Shatter resistant bi-metal that bends and flexes, per the maker
- Included components list a 12 inch, 1/2 inch, 24 TPI blade, 2-pack
- 2-pack
Cons
- No warranty term is stated
- Spec table tooth count 24 conflicts with 24 TPI on a 12 inch blade

Hacksaw Replacement Blades (10 Pack)
A 12 inch blade, 24 TPI, in a stated 10-pack with wavy set teeth.
Pros
- 10-pack, the most blades per listing here
- Wavy set teeth stated
- High speed steel teeth stated in the bullets
- Lists steel, piping, wood, angles and drill rod
Cons
- Title says carbon strength steel, bullets say bi-metal: material unclear
- No warranty term is stated
Other welders and gear to compare
Stanley 15-412 Carbide Grit Hacksaw Blade 12 InchCheck price on Amazon
Starrett Redstripe Power Hacksaw BladeCheck price on Amazon
Starrett Hacksaw BladeCheck price on Amazon
Spec sheet comparison
| Blade | Gear Score | TPI | Length | Teeth | Pack | Warranty |
|---|---|---|---|---|---|---|
| GRAFF 8% Cobalt 24 TPI | 9.6/10 | 24 | 12 in (300 mm) | Bi-metal, 8% cobalt | 3 items | Not stated |
| Starrett KBS12242 24 TPI | 9.6/10 | 24 | 12 in | BiMetal Unique HSS SafeFlex | 2-Pack | Not stated |
| Lenox 20162T232HE 32 TPI | 9.5/10 | 32 | 12 in | Bi-metal, copper hardened steel | 2-Pack | Not stated |
| Lenox 20161T224HE 24 TPI | 9.5/10 | 24 | 12 in | Bi-metal | 2-Pack | Not stated |
| JUGREAT 24 TPI 10-Pack | 9.4/10 | 24 | 12 in | High speed steel teeth (bullets) | 10-Pack | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 22 October 2026.
Buying guide: the best hacksaw blade for stainless steel
Tooth pitch
Four listings state 24 TPI and one states 32 TPI, the Lenox 20162T232HE. Pitch is the one spec every listing here states plainly, so it is the easiest way to tell the blades apart.
Tooth material
The GRAFF states 8% cobalt bi-metal teeth and names stainless steel. Starrett states its patented solid state diffusion process and SafeFlex bi-metal. Both Lenox blades state shatter resistant bi-metal. The JUGREAT bullets state high speed steel teeth, though its title says carbon strength steel.
Blade length and thickness
Every listing states 12 inch; the GRAFF also states 300 mm. Stated thickness runs from Starrett at 0.024 inch to the GRAFF at 0.62 mm. The JUGREAT bullets state 0.025 inch while its spec table states 0.03 inches.
Pack size
The JUGREAT states a 10-pack, Starrett and both Lenox blades state 2-packs, and the GRAFF states 3 items. Count the blades on arrival and match the count to the listing.
Use as directed. Clamp the work before you cut and keep fingers clear of the blade path. A bound blade can snap, so keep the cut straight and let the teeth do the work; the Lenox listing says its bi-metal blades bend and flex without breaking. Wear eye protection when a blade breaks, since the pieces are sharp.
Before You Strike an Arc
- Confirm the frame takes a 12 inch blade: every listing here states 12 inch, and the GRAFF states 300 mm.
- Count the blades on arrival: the JUGREAT states 10, Starrett and Lenox state 2 each, and the GRAFF states 3 items.
- Check the tooth material before cutting stainless: only the GRAFF listing names stainless steel.
- Match the TPI to your stock before you mount the blade: four listings state 24 TPI, one states 32 TPI.
FAQ for welders
Which listing names stainless steel?
The GRAFF: its bullets say 300mm hacksaw blades are suitable for stainless steel, and it is the only one of the five to name the metal. The other four list Metal as the compatible material.
What TPI do the blades list?
Four list 24 TPI; the Lenox 20162T232HE lists 32 TPI, the finest pitch here.
How long are these blades?
All five list 12 inch; the GRAFF also states 300 mm.
Do any of these blades list a warranty?
No. None of the five listings states a warranty term, so every blade here scores zero on warranty.
Which pack states the most blades?
The JUGREAT states a 10-pack. Starrett and both Lenox blades state 2-packs, and the GRAFF states 3 items.
Why do the spec tables disagree with the titles?
Each listing has quirks: the Lenox tables state odd dimensions against 12 inch titles, the GRAFF table describes a disc, and the Starrett and Lenox tables state tooth counts of 24 or 32 against their TPI. Trust the title and bullets over the spec table.
Related: best hacksaw for cutting steel, best band saw blade for stainless steel, jigsaw vs hacksaw for metal, reciprocating saw vs hacksaw for metal, hacksaw vs band saw for metal, best deburring tool for stainless steel, and the metal fab tools hub.
Scoring, line by line
Each blade is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Hacksaw blades carry no electrical safety listing, so every blade here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| GRAFF 8% Cobalt 24 TPI | 9.6 | 30 | 21 | 20 | n/a | 0 |
| Starrett KBS12242 24 TPI | 9.6 | 29 | 21 | 19 | n/a | 0 |
| Lenox 20162T232HE 32 TPI | 9.5 | 28 | 20 | 19 | n/a | 0 |
| Lenox 20161T224HE 24 TPI | 9.5 | 27 | 20 | 19 | n/a | 0 |
| JUGREAT 24 TPI 10-Pack | 9.4 | 23 | 18 | 20 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.




