Best Jigsaw Blade for Stainless Steel (2026)
Five jigsaw blade sets compared by tooth count, shank type, blade length and stainless cover, for clean cuts in stainless sheet and bar.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Bosch Pro-Metal SetBosch Pro-Metal Set9.7/10View on Amazon - 2
Bosch T118GFS 5-PackBosch T118GFS 5-Pack9.6/10View on Amazon - 3
DEWALT DW37245 5-PackDEWALT DW37245 5-Pack9.5/10View on Amazon - 4
CRAFTSMAN 12-Pc SetCRAFTSMAN 12-Pc Set9.4/10View on Amazon
A stainless bracket on the bench needs a clean slot, not a ragged edge, and the wrong blade chatters, wanders and dulls fast in hard sheet. Tooth count, shank type and blade length decide whether the cut stays straight. This guide compares the best jigsaw blade for stainless steel across the listings, by tooth count, shank, length and how plainly each listing names stainless cover.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Bosch Pro-Metal Set Bosch Pro-Metal Set: 5 pc. T-shank Pro-Metal set with a carbide edge blade for stainless steel, a progressive tooth blade and two speed blades. Check price on Amazon
- Bosch T118GFS 5-Pack Bosch T118GFS 5-Pack: 36 TPI Basic for Stainless Steel blades for straight cuts in 8-26 gauge stainless steel, in a 5 piece pack. Check price on Amazon
- DEWALT DW37245 5-Pack DEWALT DW37245 5-Pack: 18 TPI U-shank blades for medium metal cutting, in a 5-pack for jig saws with universal shank. Check price on Amazon
- CRAFTSMAN 12-Pc Set CRAFTSMAN 12-Pc Set: 12-piece U-shank set with metal cuts at 14 TPI and 24 TPI alongside wood cutting blades. Check price on Amazon
The machines

Bosch TPM005 5 pc. T-Shank Jig Saw Blade Set
A 5 pc. T-shank set for metal with a carbide edge blade for stainless steel, a progressive tooth blade, two speed blades and a high-speed steel basic blade.
Pros
- Includes a T118EHM Special for Stainless Steel with a carbide edge
- Progressive tooth blade for metal with various thickness
- T-shank design fits over 90% of current jig saw makes and models
- High-speed steel basic blade for straight cuts in metal
Cons
- No tooth count is stated for the individual blades
- No warranty term is stated
- No safety listing is stated

BOSCH T118GFS 5-Piece 3-1/4 In. 36 TPI Basic
A 5 piece pack of 36 TPI Basic for Stainless Steel T-shank blades for straight cuts in 8-26 gauge stainless steel, with a 2-1/4 In. working length.
Pros
- 36 TPI wavy set and milled teeth for clean, smooth cuts
- Stated for straight cuts in 8-26 gauge stainless steel
- Bi-metal construction for durability and long life
- 5 piece pack, so spares are on hand
Cons
- No warranty term is stated: the warranty line states no
- No safety listing is stated

DEWALT Jigsaw Blades, Medium Metal Cutting
A 5-pack of 3-Inch, 18-TPI, U-shank blades for medium metal cutting, stated for jig saws with universal shank.
Pros
- 18 TPI for medium metal cutting
- U-shank for jig saws with universal shank
- 5-pack, so spares are on hand
- 3-Inch length stated in the title and bullets
Cons
- No stainless steel claim is stated
- No warranty term is stated
- No safety listing is stated
- Bullets state both Made in USA and manufactured in China

Milwaukee 49-22-1178 T-Shank Metal/Wood Cutting
A 5-pack T-shank assortment with 3 metal cutting blades and 2 general purpose blades, 9/32 in. wide, in bi-metal.
Pros
- Bi-metal construction across the assortment
- 3 metal cutting blades plus 2 general purpose blades
- T-shank for jig saw machines with T-shank compatibility
- 9/32 in. width stated for the set
Cons
- No tooth count is stated
- No stainless steel claim is stated
- No concrete warranty term is stated
- Bullets state little beyond easy to use and durable

CRAFTSMAN Jigsaw Blades, U-Shank Set
A 12-piece U-shank set for wood and metal cutting, with metal cuts at 14 TPI for 3/32-inch material and 24 TPI for 1/8-inch material.
Pros
- 12-piece set covering wood and metal cuts
- Metal cuts stated at 14 TPI and 24 TPI
- Wood cuts from 6 TPI fast cut to 12 TPI scroll cut
- High carbon steel construction
Cons
- No stainless steel claim is stated
- No warranty term is stated
- No safety listing is stated
- Most blades in the set are wood blades, not metal blades
Other welders and gear to compare
Benchmark Abrasives 5 3/8" TCT Circular Saw BladeCheck price on Amazon
FOXBC 7-1/4 inch Circular Saw Blade Metal and Stainless SteelCheck price on Amazon
Milwaukee M18 FUEL D-Handle 10T Metal Blade JigsawCheck price on Amazon
Diablo Steel Demon Cermet II Saw Blade for Thick MetalCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Shank | Pack | Tooth count | Stainless cover | Length |
|---|---|---|---|---|---|---|
| Bosch Pro-Metal Set | 9.7/10 | T-shank | 5 pc. | Not stated | Carbide edge blade for stainless | Not stated |
| Bosch T118GFS 5-Pack | 9.6/10 | T-shank | 5 piece | 36 TPI | Basic for Stainless Steel | 3-1/4 In. |
| DEWALT DW37245 5-Pack | 9.5/10 | U-shank | 5-pack | 18 TPI | Metal only, not stated | 3-Inch |
| Milwaukee 49-22-1178 | 9.5/10 | T-shank | 5-pack | Not stated | Metal and wood, not stated | Not stated |
| CRAFTSMAN 12-Pc Set | 9.4/10 | U-shank | 12-piece | 14 and 24 TPI metal | Wood and metal, not stated | Not stated |
Specifications are manufacturer stated, as published on each listing and collected 28 October 2026.
What the listings tell you
We read 5 listings. Two name stainless steel in the title, and the other three name metal cutting in general, with one of those three also naming wood. Two listings disagree with their own spec tables, and those disagreements are called out in the reviews below. No listing states a safety listing, and none states a concrete warranty term.
Buying guide: best jigsaw blade for stainless steel
Tooth count and gauge
Tooth count is the sharpest difference here. The Bosch stainless blade states 36 TPI with wavy set and milled teeth for straight cuts in 8-26 gauge stainless steel. The DEWALT set states 18 TPI for medium metal cutting. The CRAFTSMAN set splits its metal work across 14 TPI, which cuts 3/32-inch material, and 24 TPI, which cuts 1/8-inch material. Finer teeth suit thinner stainless, so match the TPI to the gauge on the bench rather than grabbing the coarsest blade in the pack.
Shank type
Shank type decides fit before any cut. The Bosch sets and the Milwaukee set use a T-shank, and the Bosch Pro-Metal set states its T-shank design fits over 90% of current jig saw makes and models. The CRAFTSMAN set and the DEWALT set use a U-shank, with the DEWALT listing naming jig saws with universal shank as compatible devices. Confirm the shank on the saw before ordering, since a T-shank blade does not swap with a U-shank saw.
Blade length and pack size
Length sets the working reach. The Bosch stainless blade states 3-1/4 In. overall length with a 2-1/4 In. working length. The DEWALT blades state 3-Inch length. Pack size runs from a 5 piece pack for the Bosch stainless set, the Milwaukee set and the DEWALT set, to a 12-piece set for CRAFTSMAN. A bigger pack helps when blades dull mid-job, but only if the tooth counts in the pack suit the metal being cut.
Stainless cover versus general metal
Only two titles name stainless steel outright. The Bosch Pro-Metal set includes a T118EHM Special for Stainless Steel with a carbide edge for stainless steel, and the Bosch T118GFS set is a Basic for Stainless Steel blade. The Milwaukee set names metal and wood cutting, the DEWALT set names medium metal cutting, and the CRAFTSMAN set names wood and metal cutting, with no stainless claim in any of those three titles. For stainless work, the two Bosch sets are the honest picks, and the rest are general metal blades pressed into the same comparison.
What the listings leave unstated
Several fields sit empty here. The Milwaukee set states no tooth count, and the Bosch Pro-Metal set states no tooth count for its individual blades. No listing states a concrete warranty term: one Bosch listing states a warranty of no, and the Milwaukee listing states a manufacturer warranty with no term attached. Where a listing does not state something, this guide writes Not stated rather than guessing.
Before You Strike an Arc
- Shank check: confirm whether the saw takes a T-shank or a U-shank blade, since this comparison mixes both, and the U-shank sets will not fit a T-shank saw.
- Tooth check: for thin stainless, favor the 36 TPI Bosch stainless blade for 8-26 gauge work, and keep the 14 TPI and 24 TPI CRAFTSMAN blades for the metal thicknesses their bullets state.
- Pack check: count the blades on arrival, since pack sizes here run from a 5 piece pack to a 12-piece set, and mixed sets may hold wood blades alongside metal blades.
- Fit check: confirm the blade length suits the cut, with the Bosch stainless blade stating a 2-1/4 In. working length and the DEWALT blades stating 3-Inch length.
FAQ for welders
What tooth count suits stainless steel here?
The Bosch stainless blade states 36 TPI for straight cuts in 8-26 gauge stainless steel, with wavy set and milled teeth for clean, smooth cuts. The DEWALT set states 18 TPI for medium metal cutting. The CRAFTSMAN set states 14 TPI for 3/32-inch metal and 24 TPI for 1/8-inch metal. Finer teeth suit thinner stainless, so pick by the gauge on the bench.
Do all five sets fit every jigsaw?
No. The Bosch sets and the Milwaukee set use a T-shank, while the CRAFTSMAN set and the DEWALT set use a U-shank. The Bosch Pro-Metal set states its T-shank design fits over 90% of current jig saw makes and models, but a U-shank set still needs a saw that accepts a U-shank blade.
Why does the Bosch stainless blade listing disagree with its own spec table?
The title states a 3-1/4 In. blade, but the included components line in the spec table states 3-5/8 inch blades, and the model includes line names wood and laminate pieces. The warranty line states no. Where the title and bullets disagree with the spec table, this guide trusts the title and bullets.
Why does the DEWALT listing name two countries?
Its bullets state both Made in USA and manufactured in China, and the title names DW37245 while the spec table names DW3724-5 as the model. The listing gives no further detail on which part of the set each origin covers, so both statements are reported as stated.
Which sets actually name stainless steel?
Two do. The Bosch Pro-Metal set includes a T118EHM Special for Stainless Steel with a carbide edge, and the Bosch T118GFS set is a Basic for Stainless Steel blade. The Milwaukee, DEWALT and CRAFTSMAN sets name metal cutting, with the Milwaukee and CRAFTSMAN sets also naming wood, and none of the three names stainless steel.
Related: buffing wheel for stainless steel, jigsaw vs reciprocating saw for metal, jigsaw blade for steel tubing, cutting fluid for stainless steel, flux core vs MIG for stainless steel and our metal fab tools hub.
Scoring, line by line
Each set is scored on performance, build, value, safety listing and warranty. How we pick explains the weights. No listing here states a safety listing or a concrete warranty term, so safety and warranty sit at zero across the picks, and the ranking comes from tooth count, shank fit, stainless cover and pack value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Bosch Pro-Metal Set | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Bosch T118GFS 5-Pack | 9.6 | 29 | 20 | 20 | n/a | 0 |
| DEWALT DW37245 5-Pack | 9.5 | 26 | 20 | 19 | n/a | 0 |
| Milwaukee 49-22-1178 | 9.5 | 24 | 20 | 19 | n/a | 0 |
| CRAFTSMAN 12-Pc Set | 9.4 | 23 | 19 | 19 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




