Best Jigsaw Blade for Steel Tubing (2026)
Four jigsaw blade sets compared by TPI, shank style, stated materials and set size, for cutting steel tubing in a home fab shop.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallTAROSE T118A 10-Pc Set9.6/10View on Amazon - 2
Runner-UpDEWALT DW3741C 10-Pc Set9.6/10View on Amazon - 3
Best ValueMRCGTCE 50-Pc Blade Set9.5/10View on Amazon - 4
Best AssortmentQoaimu 20-Pc Blade Set9.6/10View on Amazon
Steel tubing shows up everywhere in a fab shop: roll cages, tube frames, handrails, exhaust work. A jigsaw with the right blade cuts it clean without the noise and sparks of an angle grinder. This guide compares four blade sets to find the best jigsaw blade for steel tubing, from a metal-only 21 TPI set to big assorted sets that cover wood and plastic too.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall TAROSE T118A 10-Pc Set: 21 TPI high-speed steel blades made for metal, 3 in long, T-shank. Check price on Amazon
- Runner-Up DEWALT DW3741C 10-Pc Set: 10-piece DEWALT set with bi-metal and HCS blades, 6, 10 and 18 TPI, in a case. Check price on Amazon
- Best Value MRCGTCE 50-Pc Blade Set: 50 blades from 6T to 21T in HCS and HSS, with a storage case. Check price on Amazon
- Best Assortment Qoaimu 20-Pc Blade Set: 20 blades in five types, with T118A and T118B rated for metal cutting. Check price on Amazon
The machines

TAROSE 10-Piece T118A 3 Inch 21 TPI Assorted
A 10-piece set of T118A blades in high-speed steel, 3-inch overall with a 2 inch knife edge at 21 TPI, made for cutting metal. Who it is for: anyone cutting steel tubing who wants a metal-only set with a fine tooth count. Who should skip it: wood and plastic work, where these blades do not belong.
Pros
- Made for metal cutting at 21 TPI in thick high-speed steel.
- T-shank fits over 90% of current jigsaws per the listing.
- 3-inch overall length with a 2 inch knife edge is stated.
- Plastic case included for storage.
Cons
- No warranty term is stated on the listing.
- No safety listing is stated.
- Metal only, so wood and plastic need another set.
- The 3 in blade suits shorter cuts only.

DEWALT Jigsaw Blades Set with Case, T-Shank
A DEWALT 10-piece T-shank set with bi-metal and HCS blades at 6, 10 and 18 TPI for wood and metal, in a case. Who it is for: shops that cut both wood and metal and want one name-brand set. Who should skip it: anyone who only cuts steel and wants a metal-only set.
Pros
- Bi-metal and HCS blades designed for long life and fast cuts.
- Three tooth counts: 6, 10 and 18 TPI for wood and metal.
- T-shank fits Bosch and DEWALT jig saws per the listing.
- Case included with the 10-piece set.
Cons
- No warranty term is stated on the listing.
- No safety listing is stated.
- Only some of the 10 blades are the metal-cutting kind.

20 Pcs T Shank Jigsaw Blades, Jig Saw Blade Set
A 20-piece T-shank set in five blade types with four blades each: T118A and T118B for metal, T119BO, T101B and T144D for wood. Who it is for: buyers who want metal and wood blades in one T-shank set. Who should skip it: anyone put off by the brand mismatch in the listing.
Pros
- T118A and T118B blades are named for metal cutting.
- 20 blades in five types, four of each, in HCS and HSS.
- T-shank fits a wide brand list per the listing.
- No screws or mounting holes needed for blade changes.
Cons
- No warranty term is stated on the listing.
- No safety listing is stated.
- No TPI or blade length is stated for any blade type.

50PCS U-Shank Jigsaw Blades Set with Storage Case
A 50-piece U-shank set of HCS and HSS blades from 6T to 21T for wood, plastic and metal, with a storage case. Who it is for: buyers who want the most blades per set and cut all three materials. Who should skip it: anyone whose saw only takes T-shank blades.
Pros
- 50 blades, the largest set here, with a storage case.
- Tooth counts from 6T to 21T across the set.
- HCS and HSS blades for wood, plastic and metal.
- Storage case keeps the 50 blades sorted.
Cons
- No warranty term is stated on the listing.
- No safety listing is stated.
- U-shank style; the listing does not state broad brand compatibility.
- The bullets carry no usable product information, only formatting data.
Other welders and gear to compare
Imachinist S641212812 Bimetal Band Saw Blade 64-1/2" X 1/2" XCheck price on Amazon
Milwaukee M18 FUEL D-Handle 10T Metal Blade JigsawCheck price on Amazon
Diablo Steel Demon Cermet II Saw Blade for Thick MetalCheck price on Amazon
Benchmark Abrasives 5 3/8" TCT Circular Saw BladeCheck price on Amazon
Diablo Steel Demon Cermet II Saw Blade for Medium MetalCheck price on Amazon
Spec sheet comparison
| Pick | Gear Score | Set size | Shank | Metal blades (stated) | Finest TPI (stated) | Case |
|---|---|---|---|---|---|---|
| TAROSE T118A 10-Pc Set | 9.6/10 | 10 | T-shank | 21 TPI HSS, made for metal | 21 TPI | Plastic case |
| DEWALT DW3741C 10-Pc Set | 9.6/10 | 10 | T-shank | Bi-metal and HCS for wood and metal | 18 TPI | Case |
| Qoaimu 20-Pc Blade Set | 9.6/10 | 20 | T-shank | T118A and T118B for metal | Not stated | Not stated |
| MRCGTCE 50-Pc Blade Set | 9.5/10 | 50 | U-shank | HSS for metal | 21T | Storage case |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 22 October 2026. None of the four listings states a warranty term or a safety listing.
Buying guide: the best jigsaw blade for steel tubing
Tooth count and the metal it cuts
The listings state tooth counts from 6 TPI to 21 TPI. The TAROSE set is made for metal at 21 TPI in high-speed steel. The DEWALT set includes bi-metal and HCS blades at 6, 10 and 18 TPI for wood and metal. The MRCGTCE set spans 6T to 21T in HCS and HSS for wood, plastic and metal. The Qoaimu set names its T118A and T118B blades for metal cutting and its T119BO, T101B and T144D blades for wood. Match the blade to the material the listing names, and keep a metal-rated blade in the saw when the tube is steel.
T-shank vs U-shank
Three of the four sets are T-shank; the MRCGTCE set is U-shank. The TAROSE listing says its T-shank blades fit over 90% of current jigsaws, naming Bosch, DEWALT, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable and Craftsman. The DEWALT listing names Bosch and DEWALT jig saws. The Qoaimu listing names Bosch, DEWALT, BLACK+DECKER, TACKLIFE, Makita, SKIL, Porter Cable, Ryobi and Rockwell BladeRunner X2. Check which shank the saw takes before ordering, since the wrong shank does not fit at all.
Blade length and set size
Only the TAROSE listing states blade length: 3-inch overall with a 2 inch knife edge. The DEWALT spec table lists 1 in by 1 in dimensions that do not describe a blade, so treat blade length as not stated there; the Qoaimu and MRCGTCE listings do not state blade length at all. Set sizes run 10 to 50 pieces: the DEWALT and TAROSE sets are 10-piece, the Qoaimu set is 20 pieces in five types of four blades each, and the MRCGTCE set is 50 pieces with a storage case. A bigger set covers more jobs and more materials, but only the blades the listing rates for metal belong on steel tubing. When the listing is silent on length, plan on a standard short jigsaw blade and confirm fit on the first cut.
Cases and storage
Three of the four sets come with a case: the DEWALT set includes a case, the TAROSE set includes a plastic case, and the MRCGTCE set includes a storage case. The Qoaimu listing does not state a case. A case matters more than it sounds: jigsaw blades are thin, sharp and easy to bend in a drawer, and keeping metal and wood blades separated saves the next blade change. If the set has no stated case, plan a blade holder or a marked envelope so the metal blades stay identifiable.
What the listings do not say
None of the four listings states a warranty term, and none states a safety listing, so both criteria score zero across the board. The MRCGTCE bullets carry no usable product information, so everything about that set comes from its title and spec table. Read the listing the way it is written: what is not stated is not promised.
Use as directed. Clamp the tubing before cutting, wear eye protection, and let the blade cut at its own pace instead of forcing it. Unplug the saw or remove the battery before changing blades. See the OSHA welding overview and the Safety Disclaimer.
Before You Strike an Arc
- Check the shank first: three sets are T-shank, the MRCGTCE set is U-shank.
- The TAROSE listing states a 3-inch overall blade with a 2 inch knife edge; the other listings do not state blade length.
- The Qoaimu title says Qoaimu while the spec table names Triwenve as the manufacturer; confirm the seller on the listing.
- None of the four listings states a warranty term, so buy on the stated specs.
FAQ for welders
What TPI cuts steel tubing?
The sets here state 6 TPI to 21 TPI. The TAROSE set is made for metal at 21 TPI in high-speed steel, and the DEWALT set includes bi-metal blades at 6, 10 and 18 TPI for wood and metal. The MRCGTCE set spans 6T to 21T, and the Qoaimu set names its T118A and T118B blades for metal without stating a TPI. Use a blade the listing rates for metal, and keep the TPI the listing states in mind when comparing sets.
Do these blades fit my jigsaw?
Three sets are T-shank and one is U-shank. The TAROSE listing says its T-shank blades fit over 90% of current jigsaws, naming Bosch, DEWALT, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable and Craftsman. The DEWALT listing names Bosch and DEWALT jig saws, and the Qoaimu listing names a wide list including BLACK+DECKER, TACKLIFE, SKIL and Ryobi. Check which shank the saw takes before ordering, since the wrong shank will not fit.
How many blades should a set have?
Set sizes here run 10 to 50 pieces. The DEWALT and TAROSE sets are 10-piece, the Qoaimu set is 20 pieces, and the MRCGTCE set is 50 pieces with a storage case. Pick the set size that matches how much cutting the work ahead needs, and remember that only the metal-rated blades in an assorted set belong on steel tubing.
Can a jigsaw really cut steel tubing?
Yes, with a metal-cutting blade. The TAROSE set is made for metal, and the DEWALT, MRCGTCE and Qoaimu sets all list metal among their materials. Clamp the tube so it cannot vibrate, pick a blade rated for metal, and let the blade do the work instead of forcing the saw.
Why does the Qoaimu listing name two brands?
The title says Qoaimu while the spec table lists Triwenve as the manufacturer. The listing does not explain the difference, and the bullets do not mention Triwenve at all. Confirm the seller on the listing before buying so there are no surprises when the box arrives.
Related: best jigsaw blade for aluminum, best jigsaw blade for sheet metal, and the portable band saw vs jigsaw comparison. Also see our metal nibbler vs jigsaw, jigsaw vs hacksaw for metal, and best hacksaw for cutting steel. Also see our best cutting fluid for metal, best heavy duty angle grinder for fabrication, and the metal fab tools hub.
Scoring, line by line
Each set is scored on performance, build, value, safety and warranty, using only what the listing publishes. Jigsaw blades have no electrical safety listing to state, so every set here scores zero on safety; none of the four listings states a warranty term either, so warranty is zero across the board. The weights are on the How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| TAROSE T118A 10-Pc Set | 9.6 | 30 | 20 | 21 | n/a | 0 |
| DEWALT DW3741C 10-Pc Set | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Qoaimu 20-Pc Blade Set | 9.6 | 28 | 19 | 21 | n/a | 0 |
| MRCGTCE 50-Pc Blade Set | 9.5 | 26 | 18 | 22 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




