Best Hacksaw for Cutting Steel (2026): 5 Picks Compared
Five hacksaws for cutting steel compared by blade, tension, cutting depth, spare blades and warranty, from 24 TPI bi-metal blades to a 50,000 psi tension frame.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallLenox HT509.7/10View on Amazon - 2
Best Blade BundleAIRAJ HF-10749.6/10View on Amazon - 3
Best Adjustable AngleAIRAJ Adjustable9.6/10View on Amazon - 4
Lightest PickHAUTMEC HT03989.5/10View on Amazon
A steel bracket needs trimming to fit, or a length of pipe has to come down to size, and the grinder would throw sparks across the bench. That is the hacksaw’s job: slow, straight, controlled cuts in steel with no power cord. The best hacksaw for cutting steel holds the blade at high tension so it tracks straight, takes a standard 12 in blade, and gives a comfortable grip for the long strokes steel demands. This guide compares five listings on blade, tension, cutting depth and warranty, from a 50,000 psi I-beam frame to saws that ship 10 spare blades in the box.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Lenox HT50: Highest Gear Score here: 50,000 psi blade tension, I-beam frame, 5-blade storage, limited lifetime warranty Check price on Amazon
- Best Blade Bundle AIRAJ HF-1074: 10 spare 24 TPI bi-metal blades in the box, 4 in maximum cutting depth Check price on Amazon
- Best Adjustable Angle AIRAJ Adjustable: 45 and 90 degree cutting angles, 10 spare blades, rubber front grip Check price on Amazon
- Lightest Pick HAUTMEC HT0398: 11 oz listed weight, 4 in cutting depth, top-mounted tension knob Check price on Amazon
The machines

Lenox Tools HT50 High-Tension Hacksaw
High-tension hacksaw with an I-beam frame, stated 50,000 psi blade tension, rubberized handles, 5-blade storage and a limited lifetime warranty.
Pros
- Stated blade tension up to 50,000 psi, the only stated figure here
- I-beam frame stores up to 5 extra 12 in blades
- Accepts LENOX reciprocating saw blades as a jab saw
- Limited lifetime warranty stated in the spec table
Cons
- Heaviest listed weight here at 1.9 lb
- Spec table says white while the title says blue

AIRAJ 12 Inch High-Tension Hacksaw for Metal
12 in high-tension hacksaw with a 24 TPI bi-metal blade, 10 spare blades, wing knob tension and a stated 4 in cutting depth.
Pros
- 10 spare 24 TPI bi-metal blades included
- Stated 4 in, or 100 mm, maximum cutting depth
- Wing knob for fast blade changes
- Listed for steel, stainless, iron pipe and rebar
Cons
- Warranty type reads limited warranty with no term stated
- 18 in overall length is the longest here
- Blades are consumables, so the 10 spares will run out on steel
- No stated blade tension figure

AIRAJ 12 Inch Adjustable Tension Hacksaw
12 in hacksaw with 45 and 90 degree cutting angles, a 24 TPI HSS blade, 10 spare blades and a rubber front grip.
Pros
- 45 and 90 degree dual cutting angles for standard and flush cuts
- 10 spare 24 TPI HSS blades included
- Rubber front-handle grip
- Adjustable tension frame
Cons
- No warranty term is stated on the listing
- No cutting depth is stated
- 460 g listed weight with no handle length stated

HAUTMEC 12-Inch Hacksaw, High Tension Hack Saw
12 in high-tension hacksaw with a 24 TPI bi-metal HSS blade, top-mounted tension knob, 4 in cutting depth and an 11 oz listed weight.
Pros
- Lightest listed weight here at 11 oz
- Stated 4 in cutting depth for steel pipe and tube
- Top-mounted tension knob, no tools needed
- 24 TPI bi-metal HSS blade included
Cons
- Only one blade in the box
- No warranty term is stated on the listing
- 11 oz listed weight may flex on heavy cuts
- Handle material listed as ABS plastic

Hanpex 12in. High-Tension Hacksaw Frame with 24
12 in high-tension hacksaw with a 24 TPI bi-metal blade, adjustment knob, non-slip handle and a stated 4 in cutting depth.
Pros
- Stated 4 in, or 100 mm, maximum cutting depth
- Steel-reinforced core with adjustment knob
- Non-slip handle for continuous cutting
- 0.3 kg listed weight
Cons
- Only one blade in the box
- No warranty term is stated on the listing
- Plastic handle, less durable than rubber or steel
- Thinnest spec detail of the five listings
Spec sheet comparison
| Model | Gear Score | Blade | Tension | Cutting depth | In the box | Warranty (stated) |
|---|---|---|---|---|---|---|
| Lenox HT50 | 9.7/10 | 12 in, 24 TPI bi-metal | 50,000 psi | Not stated | Frame, 1 blade, 5-blade storage | Limited lifetime |
| AIRAJ HF-1074 | 9.6/10 | 12 in, 24 TPI bi-metal | Wing knob | 4 in / 100 mm | Frame, blade, 10 spares | Not stated |
| AIRAJ Adjustable | 9.6/10 | 12 in, 24 TPI HSS | Adjustable frame | Not stated | Frame, blade, 10 spares | Not stated |
| HAUTMEC HT0398 | 9.5/10 | 12 in, 24 TPI bi-metal HSS | Top-mounted knob | 4 in | Frame, 1 blade | Not stated |
| Hanpex X053-AU | 9.5/10 | 12 in, 24 TPI bi-metal | Adjustment knob | 4 in / 100 mm | Frame, 1 blade | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 21 October 2026.
How the Gear Score works
Each saw is scored on performance, build, value, safety and warranty, using only what the listing publishes. The weights are published on the How We Pick page. No listing here states a safety certification, so every saw scores zero on safety; the ranking comes from the other four criteria.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Lenox HT50 | 9.7 | 32 | 21 | 21 | n/a | 4 |
| AIRAJ HF-1074 | 9.6 | 30 | 20 | 21 | n/a | 0 |
| AIRAJ Adjustable | 9.6 | 28 | 20 | 21 | n/a | 0 |
| HAUTMEC HT0398 | 9.5 | 29 | 20 | 18 | n/a | 0 |
| Hanpex X053-AU | 9.5 | 29 | 19 | 18 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.
Buying guide: choosing the best hacksaw for cutting steel
Blade TPI and material
Every saw here ships with a 12 in, 24 TPI blade, which is the tooth count these listings state for steel. Three listings name bi-metal blades, one names an HSS blade and one names a bi-metal HSS blade. Bi-metal is the common answer for steel because the teeth stay hard while the back stays flexible. One listing to read carefully: the adjustable AIRAJ spec table lists 6 teeth against the 24 TPI in its title and bullets, so go by the title and bullets. The Lenox needs the same treatment: its title says bi-metal blades while the spec table says high speed steel. All five spec tables state 24 teeth except the adjustable AIRAJ, whose 6-teeth figure contradicts its own title and bullets.
Tension
Tension is what keeps a blade from wandering in the cut. The Lenox is the only listing that states a figure: blade tension up to 50,000 psi on an I-beam frame. The other four tension with a knob, a wing knob on the AIRAJ HF-1074, an adjustment knob on the Hanpex, a top-mounted knob on the HAUTMEC, and an adjustable frame on the second AIRAJ. A knob you can reach mid-cut matters when a blade starts to drift.
Cutting depth
Three listings state a maximum cutting depth of 4 in, or 100 mm: both the AIRAJ HF-1074 and the Hanpex state it in the bullets, and the HAUTMEC states 4 in. The Lenox and the adjustable AIRAJ state no cutting depth. Match the depth to the stock: 4 in covers most angle, tube and pipe in a home shop. See jigsaw vs hacksaw for metal when the cut outgrows a hand saw.
Spare blades and storage
Blades are consumables, and both AIRAJ listings say to replace the blade when the teeth are severely worn. The two AIRAJ saws each ship with 10 spare blades, the most here. The Lenox stores up to 5 extra 12 in blades inside the I-beam, and it also accepts LENOX reciprocating saw blades as a jab saw. The Hanpex and HAUTMEC ship one blade each. A little cutting fluid for metal on the teeth extends blade life on steel.
Frame build
The frame sets the stiffness. The Lenox uses an I-beam construction that the listing says tensions the blade up to 50,000 psi, and the beam doubles as storage for up to 5 extra 12 in blades. The two AIRAJ saws and the HAUTMEC use steel frames: the HF-1074 lists high-quality steel with high hardness, the adjustable AIRAJ lists high quality steel, and the HAUTMEC a strong steel frame the listing says reduces blade bending. The Hanpex lists a steel-reinforced core. Stated frame lengths run from 16 in on the adjustable AIRAJ to 18 in on the HF-1074, with the Lenox at 15.75 in long and the Hanpex at 16.7 in. A longer frame reaches deeper into a workpiece, while the I-beam keeps the Lenox rigid at a listed 1.9 lb.
Changing blades
How the blade mounts decides how fast a dull blade gets swapped. The AIRAJ HF-1074 tensions through a wing knob on the head, and the listing says the spare blade swaps in when the knob is fully loosened. The HAUTMEC uses a top-mounted knob that needs no tools, and the Hanpex uses a rotating adjustment knob for different work. The Lenox takes a different approach: it accepts any LENOX reciprocating saw blade to use as a jab saw, which covers tight spots a full frame cannot reach. The adjustable AIRAJ tightens or loosens the blade on its frame. All five saws take 12 in blades, so one spare size fits the whole group.
Handles and grip
Steel takes long strokes, so the handle matters. The Lenox lists rubberized handles for wet and cold conditions, the adjustable AIRAJ lists a rubber front-handle grip, the Hanpex lists a non-slip handle, and the HAUTMEC lists a streamlined ergonomic handle. Listed weights run from 11 oz on the HAUTMEC to 1.9 lb on the Lenox, with the Hanpex at 0.3 kg and the adjustable AIRAJ at 460 g. Handle materials differ too: metal on the AIRAJ HF-1074, rubber on the Lenox and the adjustable AIRAJ, plastic on the Hanpex, and acrylonitrile butadiene styrene on the HAUTMEC.
Use as directed. Clamp the work solid before cutting, wear eye protection because steel chips fly, and keep fingers clear of the blade path. Let the blade do the work on the push stroke instead of forcing it, and check the tension knob when a cut starts to wander.
Before You Strike an Arc
- Check the blade on arrival: 12 in, 24 TPI on all five listings, seated straight and tensioned before the first cut.
- Stock spares: the AIRAJ saws ship 10 each, the Lenox beam holds 5 extras, and blades are consumables on steel.
- Confirm the cutting depth against the stock: 4 in stated on three listings, not stated on the Lenox and the adjustable AIRAJ.
- Note the Lenox spec table quirks on arrival: the title says blue and the table says white, the title says bi-metal blades and the table says high speed steel, and the table lists a 5000 rpm speed that makes no sense on a hand saw.
- Match the TPI to the work: 24 TPI ships on all five saws, the count these listings state for steel, stainless and rebar.
FAQ for welders
What TPI hacksaw blade do I need for steel?
All five listings here ship 24 TPI blades, and they are the tooth count these makers state for steel, stainless, iron pipe and rebar. Finer teeth suit thin stock, coarser teeth suit thick stock, but 24 TPI is the stated standard across this group. The listings name bi-metal or HSS construction on all five blades, and the Lenox title says bi-metal where its spec table says high speed steel.
How tight should a hacksaw blade be?
As tight as the frame allows without bowing. The Lenox states up to 50,000 psi of blade tension, the highest stated figure here. The other four use a tension knob: wing knob on the AIRAJ HF-1074, adjustment knob on the Hanpex, top-mounted knob on the HAUTMEC, and an adjustable frame on the second AIRAJ. Snug the blade and re-check it during long cuts.
How deep can a hacksaw cut?
Three listings state a 4 in, or 100 mm, maximum cutting depth: the AIRAJ HF-1074, the Hanpex and the HAUTMEC. The Lenox and the adjustable AIRAJ state no depth, so measure the stock against the 4 in figure the other three state. For stock deeper than the stated depth, cut from both sides or move to a band saw; see the band saw blades for stainless steel.
Are 12 in hacksaw blades interchangeable?
All five saws take 12 in blades, and the Lenox frame even accepts LENOX reciprocating saw blades as a jab saw. The two AIRAJ saws ship 10 spares each and the Lenox beam stores 5 extras, so staying with the 12 in size keeps every spare useful.
When should I replace a hacksaw blade?
Both AIRAJ listings say the blade is a consumable and to replace it when the teeth are severely worn, before it starts slowing the work. A fresh 24 TPI bi-metal blade cuts faster with less effort than a dull one pushed harder, which is why the 10-blade boxes on the two AIRAJ saws matter for steel work.
Related: jigsaw vs hacksaw for metal, best cutting fluid for metal, and the metal fab tools hub. Also see the best belt grinder for welders.





