Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Jigsaw vs Hacksaw for Metal: Which Should You Buy?

Jigsaw vs hacksaw for metal: three jigsaws ranked by stated specs, with the hacksaw side described from the category, for cutting metal the right way.

Jigsaw vs Hacksaw for Metal: Which Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 150 Piece Contractor Jigsaw Blades Set with Storage Case50 Piece Contractor Jigsaw Blades Set with Storage Case9.6/10View on Amazon
  2. 2HAUTMEC 12" Bi-Metal Hacksaw Blades SetHAUTMEC 12" Bi-Metal Hacksaw Blades Set9.7/10View on Amazon

For jigsaw vs hacksaw for metal, the short answer is that a jigsaw handles curves and long runs in sheet metal, while a hacksaw has no battery or cord to manage and fits where no power tool reaches. All three products below are jigsaws, ranked by their stated specs; the hacksaw side is described from the category, since no hacksaw is listed here.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Side by side

Model Power Speed Weight Warranty
DEWALT DCS334B 20V Jig Saw 20V cordless 3200 4.2 lb Limited
BLACK+DECKER BDEJS300C Corded 4.5A 3000 SPM 4.4 lb 2-year
Hammerhead HAJS048 Corded 4.8A 3000 SPM Not stated 2-year

All specs here repeat what the maker rates and the listing prints, copied down 21 October 2026. All three examples are jigsaws; the hacksaw side is described from the category.

Jigsaw vs hacksaw for metal: when a jigsaw is the better choice

The DEWALT DCS334B states a 20V cordless brushless motor with a 3200 blade speed, a 4-position orbital action, a variable speed trigger and dial, an LED light, an integrated dust blower and an all-metal keyless shoe that bevels to 45 degrees, at 4.2 lb. The BLACK+DECKER BDEJS300C states a corded 4.5A motor with up to 3000 SPM, a 3/4 inch stroke, a beveling base plate to 45 degrees, a wire guard sightline channel, a quick-clamp for tool-free blade changes and a built-in dust blower, at 4.4 lb, for wood and metal. The Hammerhead HAJS048 states a corded 4.8A motor with 3000 SPM, a 4-stage orbital function, a beveling metal base plate to 45 degrees, a dust port, a tool-free T-shank blade change system and a brake function. A jigsaw handles curves and repeatable cuts; the DEWALT and the Hammerhead take T-shank blades, while the BLACK+DECKER states a quick-clamp for tool-free blade changes.

When a hacksaw is the better choice

A hacksaw is the manual side: a frame, a blade and your arm, with no battery, no cord and no stated speed to compare. No hacksaw is listed here, so this guide cannot rank one against the three jigsaws. Choose the hacksaw for one-off cuts, for tight spots where a jigsaw body will not fit, and for thin stock where you want full control of each stroke. Choose the jigsaw for most other metal work, especially curves and long straight runs.

The three jigsaws, ranked

The DEWALT ranks first on stated specs: the only cordless of the three, brushless, with the highest stated blade speed at 3200 and a 4-position orbital action. The BLACK+DECKER ranks second with a stated 2 year limited manufacturers warranty, corded unlimited runtime and a stated wood-and-metal surface recommendation. The Hammerhead ranks third with a stated 2 Year Limited Warranty, a brake function and a dust port, though its listing states wood as the surface recommendation, so it is the odd one out for metal work. All three state bevel cuts to 45 degrees.

Blade speed and stroke

Stated speed separates the three. The DEWALT states a 3200 blade speed on its 20V brushless motor, with a variable speed trigger and dial for dialing it down on thin metal. The BLACK+DECKER states up to 3000 SPM from its corded 4.5A motor with a 3/4 inch stroke length. The Hammerhead states 3000 SPM from its corded 4.8A motor. Longer strokes clear chips faster; the BLACK+DECKER is the only one of the three to state its stroke length. For metal, slower speeds with a metal-cutting blade beat full throttle.

Orbital action

Orbital action moves the blade forward on the cutting stroke for faster, more aggressive cuts. The DEWALT states a 4-position orbital action, and the Hammerhead a 4-stage orbital function, so both let you choose between aggressive and smooth. The BLACK+DECKER listing states no orbital action. For metal, the lowest orbital setting, or none at all, gives the cleanest cut with the least blade wander; save the aggressive settings for wood.

Dust management and visibility

Metal cutting throws chips, not sawdust, but keeping the cut line visible still matters. The DEWALT states an integrated dust blower plus an LED light over the cut line. The BLACK+DECKER states a built-in dust blower and a wire guard sightline channel for a clear view of the blade. The Hammerhead states a dust port for connecting extraction. On a hacksaw there is no blower at all, just your eyes and the blade, which is one more reason the jigsaw wins on long cuts.

Blade changes

Metal work eats blades, so fast changes matter. The BLACK+DECKER states a quick-clamp for tool-free blade changes. The Hammerhead states a tool-free T-shank blade change system. The DEWALT states it accepts T-shank blades with an all-metal keyless shoe.

Weight and handling

The DEWALT states 4.2 lb, the lightest of the three, which matters on overhead cuts and long sessions. The BLACK+DECKER states 4.4 lb. The Hammerhead states no weight. A cordless jigsaw trades battery weight for freedom from the cord; the corded pair trades unlimited runtime for the tether. For a beginner, the lighter tool with a variable speed trigger is the easier one to control on metal.

FAQ for welders

Can these jigsaws cut metal?

The DEWALT and BLACK+DECKER listings state metal among their surfaces. The Hammerhead listing states wood as its surface recommendation.

Cordless or corded?

The DEWALT is 20V cordless. The BLACK+DECKER and Hammerhead are corded electric, with unlimited runtime.

Which state a 2-year warranty?

The BLACK+DECKER states a 2 year limited manufacturers warranty, and the Hammerhead states a 2 Year Limited Warranty. The DEWALT states a limited warranty with no term given.

Which is the lightest?

The DEWALT at a stated 4.2 lb. The BLACK+DECKER states 4.4 lb; the Hammerhead states no weight.

Do I need special blades for metal?

The DEWALT states it accepts T-shank blades, and the Hammerhead states a tool-free T-shank blade change system. For those two, fit a metal-cutting T-shank blade for metal work; the BLACK+DECKER states a quick-clamp for tool-free blade changes.

More welding guides

Also see our hacksaw vs band saw for metal and reciprocating saw vs hacksaw for metal guides.

More buying guides