Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best High Carbon Steel Utility Knife Blades (2026): 4 Packs Compared

Four high carbon steel utility knife blade packs compared on steel, pack size, notch fit, storage and the materials each listing states.

Best High Carbon Steel Utility Knife Blades (2026): 4 Packs Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Romeda 100-PackBest OverallRomeda 100-Pack9.7/10View on Amazon
  2. 2WORKPRO 100-PackBest 100-Pack with DispenserWORKPRO 100-Pack9.6/10View on Amazon
  3. 3Home Planet Gear 10-PackBest Small PackHome Planet Gear 10-Pack9.5/10View on Amazon
  4. 4ALLWAY RKB5 5-PackBest 3-NotchALLWAY RKB5 5-Pack9.5/10View on Amazon

A dull blade drags through cardboard, tears carpet backing and leaves a ragged edge on drywall. A fresh high carbon steel edge slices clean and stays sharp through a long run of cuts. This guide compares the best high carbon steel utility knife blades as refill packs, scored on steel, pack size, notch fit and storage, so you can match a pack to the cutter already in your hand.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Romeda 100-Pack: 100 SK5 blades in 10 storage boxes, with stated rust resistance and a wide cutting list. Check price on Amazon
  • Best 100-Pack with Dispenser WORKPRO 100-Pack: 100 SK5 blades in a dispenser case that stores spares and takes dull blades. Check price on Amazon
  • Best Small Pack Home Planet Gear 10-Pack: 10 SK5 blades at a stated 61 by 19 mm with 2 notches and a storage dispenser box. Check price on Amazon
  • Best 3-Notch ALLWAY RKB5 5-Pack: 5 blades of 100% high carbon steel with a sharp point for thick sheet material. Check price on Amazon

The machines

Romeda 100 Pcs Utility Knife Blade

Romeda 100 Pcs Utility Knife Blade

Romeda9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 100 pack of SK5 high carbon steel blades in 10 storage boxes, 10 blades per box, sized for standard box cutters and retractable knives.

Pros

  • 100 SK5 high carbon steel blades, the largest pack here
  • 10 plastic storage boxes with 10 blades in each box
  • Stated not to rust, break or deform easily
  • Cuts leather, rope, paper, carpet, rubber, cardboard and pipes

Cons

  • No warranty term is stated
  • Blade notch count is not stated, so check fit with your cutter
  • Blade thickness is not stated
  • 100 blades take up more drawer space than a small pack
WORKPRO Utility Knife Blades

WORKPRO Utility Knife Blades

WORKPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 100 pack of SK5 steel blades in a dispenser case for safe storage and disposal, made to standard size for most standard and fixed utility knives.

Pros

  • 100 SK5 steel blades in one pack
  • Dispenser case for safe storage and disposal
  • Cuts cardboard, leather, linoleum, rope, soft metal and pipe
  • Standard size fits most standard and fixed utility knives

Cons

  • No warranty term is stated
  • Blade notch count is not stated, so check fit with your cutter
  • Blade dimensions are not stated, only the case size
  • 100 blades is more than a light user needs
Utility Knife Blades Ten Pack

Utility Knife Blades Ten Pack

Home Planet Gear9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 pack of SK5 high carbon steel blades, 61 mm by 19 mm with 2 notches, in a storage dispenser box that fits most standard utility knives and box cutters.

Pros

  • SK5 high carbon steel with a precision-honed edge
  • Stated blade size, 61 mm by 19 mm, with 2 notches
  • Storage dispenser box keeps spare blades covered
  • Cuts cardboard, paper, carpet, leather and drywall

Cons

  • 10 blades run out fast in a busy shop
  • 2-notch fit only, so check your cutter takes 2-notch blades
  • 61 mm length suits standard cutters only
  • Stated fit covers standard utility knives and box cutters only
ALLWAY RKB5 3-Notch Carbon Steel Utility Knife

ALLWAY RKB5 3-Notch Carbon Steel Utility Knife

ALLWAY9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5 pack of 100% high carbon steel blades with a sharp point and 3 notches, made for standard utility knives and thick, dense sheet material.

Pros

  • 100% high carbon steel for reliable strength
  • Sharp point and precision-honed edges
  • 3-notch fit works with all standard utility knives
  • Cuts thick, dense sheet material, drywall, carpet, wallpaper and shingles

Cons

  • Only 5 blades, the smallest pack here
  • No stated blade length or width
  • No storage box or dispenser stated
  • 5 blades run out fast in a busy shop

Other welders and gear to compare

Spec sheet comparison

Blade Gear Score Pack size Steel Notches Storage Warranty
Romeda 100-Pack 9.7/10 100 blades SK5 high carbon steel Not stated 10 storage boxes Not stated
WORKPRO 100-Pack 9.6/10 100 blades SK5 steel Not stated Dispenser case Not stated
Home Planet Gear 10-Pack 9.5/10 10 blades SK5 high carbon steel 2-notch Storage dispenser box Not stated
ALLWAY RKB5 5-Pack 9.5/10 5 blades 100% high carbon steel 3-notch Not stated Not stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 20 November 2026.

Buying guide: what matters in the best high carbon steel utility knife blades

Steel and edge

Three packs here state SK5 high carbon steel, and the ALLWAY states 100% high carbon steel. SK5 is a high carbon steel grade the makers choose for hardness and wear resistance, and the Romeda listing states its blades are not easy to rust, break or deform. All four listings describe precision-honed or precisely sanded edges for a smooth cut. Edge life comes from the steel and the hone, so read the stated steel before the pack size.

Pack size and storage

Pack sizes here run from 5 blades to 100 blades. The Romeda pack holds 100 blades in 10 plastic storage boxes with 10 blades in each box, and the WORKPRO pack holds 100 blades in a dispenser case that also takes dull blades for disposal. The Home Planet Gear pack holds 10 blades in a storage dispenser box. Loose blades in a drawer cut fingers, so storage matters as much as count.

Notches and fit

Utility blades lock into the cutter by notches, and the count has to match. The Home Planet Gear blades state 2 notches at 61 mm by 19 mm, and the ALLWAY blades state 3 notches with a sharp point. The Romeda and WORKPRO listings do not state a notch count, so check your cutter before ordering a pack that does not state it. All four listings describe a standard size that fits most standard utility knives and box cutters.

What they cut

Match the blade to the material on your bench. The listings cover cardboard, paper, carpet, leather and drywall across the packs, with the Romeda adding rope, rubber and pipes, the WORKPRO adding linoleum and soft metal, and the ALLWAY adding wallpaper, shingles and thick, dense sheet material. The ALLWAY is the only pack here that lists a sharp point, and it lists thick, dense sheet material among its uses.

Use as directed. Utility blades are sharp, so slide a fresh blade in with the cutter locked and keep spares in the box or dispenser, never loose in a drawer or pocket. Store blades where children cannot reach them, and drop dull blades in the WORKPRO dispenser case or a sharps container instead of the trash. See our Safety Disclaimer.

Before You Strike an Arc

  • Check the notch count on your cutter against the pack: 2 notches for the Home Planet Gear blades, 3 notches for the ALLWAY blades.
  • Check the blade size against your cutter: 61 mm by 19 mm for the Home Planet Gear blades, and the Romeda size of 2.36 inches wide at the bottom.
  • Keep the storage boxes or dispenser case closed until you need a blade, and put dull blades back in the case.
  • Seat the blade fully in the cutter and lock it before the first cut.

FAQ for welders

What is the difference between SK5 and high carbon steel blades?

SK5 is a grade of high carbon steel, so the two labels overlap: three packs here state SK5 high carbon steel and the ALLWAY states 100% high carbon steel. The makers link the steel to hardness and wear resistance, and the Romeda listing states its blades are not easy to rust, break or deform. Judge a pack by the steel the listing states, not by the label alone.

Will these blades fit my utility knife?

All four listings describe a standard size that fits most standard utility knives and box cutters. Check the notch count first: the Home Planet Gear blades state 2 notches and the ALLWAY blades state 3 notches, while the Romeda and WORKPRO listings do not state a notch count. If your cutter needs a notch count the pack does not state, check with the maker before ordering.

How many blades come in a pack?

The ALLWAY pack holds 5 blades, the Home Planet Gear pack holds 10 blades, and the Romeda and WORKPRO packs each hold 100 blades. The Romeda pack splits its 100 blades across 10 plastic storage boxes with 10 blades in each box, and the WORKPRO pack holds its 100 blades in a dispenser case. Pick the count that matches how fast you go through blades.

How should I store spare utility blades?

Keep spares in the box or case they came in: the Romeda pack has 10 storage boxes, the WORKPRO pack has a dispenser case, and the Home Planet Gear pack has a storage dispenser box. The ALLWAY pack states no storage, so keep its blades in a closed box of your own. Store blades where children cannot reach them.

What can these blades cut?

Across the four listings, the stated materials are cardboard, paper, carpet, leather, drywall, rope, rubber, linoleum, soft metal, wallpaper, shingles, pipes and thick, dense sheet material. The WORKPRO listing adds soft metal and pipe, and the ALLWAY listing adds thick, dense sheet material. Match the pack to the material you cut most.

Related: best high carbon steel for knife making, what is the best knife steel, best oil for carbon steel knife, and the knife casting hub. Also see our knife making guides.

Scoring, line by line

Each pack is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Utility blades carry no electrical safety listing, so every pack here scores zero on that criterion, and no listing states a warranty term, so every pack scores zero on warranty too; the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Romeda 100-Pack 9.7 30 21 22 n/a 0
WORKPRO 100-Pack 9.6 29 21 21 n/a 0
Home Planet Gear 10-Pack 9.5 28 20 19 n/a 0
ALLWAY RKB5 5-Pack 9.5 28 20 18 n/a 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides