Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best High Carbon Steel for Knife Making (2026): 5 Bars Compared

Five high carbon steel bars for knife making, compared on steel grade, size, thickness, pack count and annealed condition, from what each listing states.

Best High Carbon Steel for Knife Making (2026): 5 Bars Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Patriot Steel 1095Best OverallPatriot Steel 10959.7/10View on Amazon
  2. 2Dkoryi 80CRV2Best 12-PackDkoryi 80CRV29.6/10View on Amazon
  3. 3Yampos 1095Best Wide BarYampos 10959.6/10View on Amazon
  4. 4XIOBTQT 1095Best Rust-Proof PackXIOBTQT 10959.6/10View on Amazon

A blade starts as flat bar stock on the bench, and the steel in that bar decides how the blade hardens, grinds and holds an edge. This guide to the best high carbon steel for knife making compares five flat bars in 1095 and 80CRV2 on grade, size, thickness, pack count and condition, using only what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Patriot Steel 1095: 3/16 in thick, cold rolled annealed, USA milled, 4 pack Check price on Amazon
  • Best 12-Pack Dkoryi 80CRV2: 12 bars, 80CRV2, pre-deburred edges, mill-scale-free surface Check price on Amazon
  • Best Wide Bar Yampos 1095: 2 in wide, 5 pack, annealed 1095, hot rolled unfinished Check price on Amazon
  • Best Rust-Proof Pack XIOBTQT 1095: 4 pack in rust-proof oil, paper and bubble wrap Check price on Amazon

The machines

Patriot Steel 1095 High Carbon Knife Making

Patriot Steel 1095 High Carbon Knife Making

Patriot Steel9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

USA-milled 1095 flat stock, 12 x 1.5 x 3/16 inches, cold rolled annealed, in a 4 pack.

Pros

  • Thickest stock here at 3/16 inch, for heavier blades
  • Cold rolled annealed, so it grinds with less sanding, per the maker
  • Made in the USA, small batch production with inspections, per the maker
  • 4 pack of 12 inch bars, enough stock for several blades

Cons

  • Thickest stock here at 3/16 inch, so more steel to grind away on thin blades
  • 1.5 inch width limits wide blade designs
  • No stated shearing tolerance, unlike the Dkoryi bar
  • 4 bars only, fewer than the 5 and 12 packs here
12Pcs 80CRV2 Carbon Steel Bar Cold Rolled

12Pcs 80CRV2 Carbon Steel Bar Cold Rolled

Dkoryi9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12 pack of 80CRV2 flat bars, 12 x 1.5 x 1/8 inches, pre-annealed with deburred edges and a mill-scale-free surface.

Pros

  • 12 bars, the largest pack here, for practice and repeat blades
  • Precision sheared to a stated tolerance of plus or minus 0.1 mm
  • Pre-deburred edges and mill-scale-free surface, ready to grind
  • Pre-annealed and laser cut for flatness and consistent hardness, per the maker

Cons

  • 1/8 inch stock is thinner than the 3/16 inch Patriot bar
  • 1.5 inch width, no wider option in this pack
  • Only 80CRV2 here, so no 1095 option in a 12 pack
  • No warranty term is stated
1095 Steel Flat Stock for Knife Making-Annealed

1095 Steel Flat Stock for Knife Making-Annealed

XIOBTQT9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Cold rolled annealed 1095 flat stock, 12 x 1.5 x 0.12 inches, in a 4 pack with rust-proof packaging.

Pros

  • Cold rolled annealed, saving sanding time and belts, per the maker
  • Three layers of rust-proof packaging: oil, paper and bubble wrap
  • 1095 is the highest carbon grade, per the maker, with excellent heat treatment results
  • 4 pack suits hand DIY blades, tools and spacers, per the maker

Cons

  • 0.12 inch stock is the thinnest 1095 here
  • 1.5 inch width, no wider option in this pack
  • 4 bars only, fewer than the 5 and 12 packs here
  • No stated shearing tolerance
Yampos 5 Pack 1095 High Carbon Steel Flat Bar

Yampos 5 Pack 1095 High Carbon Steel Flat Bar

Yampos9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5 pack of 1095 flat bars, 12 x 2 x 1/8 inches, hot rolled and unfinished, annealed for shaping.

Pros

  • 2 inch width, the widest bar here
  • 5 pack, enough stock for several projects, per the maker
  • Annealed condition, easier to cut, drill and shape, per the maker
  • Unfinished plain surface suits cutting, welding, grinding, drilling and bending

Cons

  • Hot rolled unfinished surface needs more prep than cold rolled stock
  • 1/8 inch stock is thinner than the 3/16 inch Patriot bar
  • Welding needs preheating and post-weld heat treatment, per the maker
  • 5 bars only, fewer than the 12 pack here
12"x1.5"x1/8" 1095 Steel for Knife Making

12"x1.5"x1/8" 1095 Steel for Knife Making

WENHUALI9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Untreated 1095 flat bars, 12 x 1.5 x 1/8 inches, in a 5 pack for DIY forging and professional use.

Pros

  • Untreated steel allows annealing for control over hardness and toughness, per the maker
  • 5 pack of 12 inch bars for several knife or tool projects
  • Smooth surface and machinability make it easy to grind, per the maker
  • Suits beginners and experienced makers, per the maker

Cons

  • Untreated condition means the maker leaves annealing to you
  • 1/8 inch stock is thinner than the 3/16 inch Patriot bar
  • 1.5 inch width, no wider option in this pack
  • No warranty term is stated

Other welders and gear to compare

Spec sheet comparison

Steel Gear Score Size Thickness Pack Condition Weight
Patriot Steel 1095 9.7/10 12 x 1.5 in 3/16 in 4 Cold rolled annealed 3.75 lb
Dkoryi 80CRV2 9.6/10 12 x 1.5 in 1/8 in 12 Cold rolled, pre-annealed 1.5 lb
XIOBTQT 1095 9.6/10 12 x 1.5 in 0.12 in 4 Cold rolled annealed 2.37 lb
Yampos 1095 9.6/10 12 x 2 in 1/8 in 5 Hot rolled, annealed 3.74 lb
WENHUALI 1095 9.6/10 12 x 1.5 in 1/8 in 5 Untreated Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 19 November 2026.

How to choose the best high carbon steel for knife making

1095 or 80CRV2

Four of the five bars here are 1095, and the fifth is 80CRV2. The maker of the 1095 bars calls 1095 the highest carbon grade and says billets of high carbon steel give excellent heat treatment results, while the Dkoryi 80CRV2 bar is precision sheared to a stated tolerance of plus or minus 0.1 mm. Grade alone does not settle the pick; thickness, pack count and condition matter as much. For more on how 1095 stacks up, see 1095 vs D2 knife steel.

Thickness and width

Every bar here is 12 inches long, so the choice is thickness and width. The Patriot bar is the thickest at 3/16 inch, the XIOBTQT bar is the thinnest at 0.12 inch, and the other three are 1/8 inch. Width is 1.5 inches except for the Yampos bar at 2 inches, which suits wider blades and shop projects. Match the bar to the blade: a thick bar leaves more steel to grind away on a thin blade, while a thin bar limits how much edge geometry you can shape.

Pack count

Packs here run from 4 bars to 12 bars. The Dkoryi 12 pack suits makers who want plenty of stock on hand for practice and repeat blades, per the maker, while the 4 and 5 packs suit a smaller run of blades. A larger pack also spreads the cost of shipping and packaging across more bars, but only if you will use the stock.

Annealed, cold rolled or untreated

Condition decides how the bar works before heat treatment. The Patriot and XIOBTQT bars are cold rolled annealed, which the makers say saves sanding time and belts, and the Yampos bars are hot rolled and supplied annealed, which the maker says makes them easier to cut, drill and shape with standard workshop tools. The WENHUALI bars ship untreated, and the maker says the steel allows easy annealing, giving control over hardness and toughness. If you want stock that is ready to grind, pick an annealed bar; if you want to set the hardness yourself, the untreated bar leaves that choice open.

Made in the USA

Only the Patriot bar states where it is milled: the maker says it is crafted in the USA in small batches, with inspections that keep each order consistent. The other listings state no country of origin. If domestic milling matters to you, the Patriot bar is the pick that states it; if it does not, judge the other bars on grade, size and pack alone.

Use as directed. Heat treating means hot steel, so work outdoors or with strong ventilation, use dry tools and molds only, and wear a full face shield and leather gloves and apron. Never heat unknown or sealed scrap, and never exceed the rated capacity of any hoist or press you use to move stock. See the OSHA machine guarding guide and our Safety Disclaimer.

Before You Strike an Arc

  • Check the bar size on arrival: 12 inches long, 1.5 inches wide except the Yampos at 2 inches, and the thickness your pick states.
  • Confirm the thickness before ordering the Yampos and Patriot bars: the maker gives two values for each.
  • Annealed bars are soft enough to cut, drill and shape with standard workshop tools; the untreated WENHUALI bar is sold for annealing by the maker.
  • Wipe off the rust-proof oil on the XIOBTQT pack before layout and grinding.
  • Stack bars flat and keep them dry so they stay straight for layout.

FAQ for welders

Is circular saw blade steel good for knife making?

None of the five bars here is cut from a saw blade. Each is flat stock sold for knife making: four in 1095 and one in 80CRV2, in stated sizes from 12 inches long. If a steel is not sold as knife stock, its grade and condition are unknown, so these bars are the surer starting point.

What is good knife making steel?

The bars here are 1095 and 80CRV2, both sold as high carbon knife steel. The maker of the 1095 bars calls 1095 the highest carbon grade, with excellent heat treatment results, while the 80CRV2 bar is precision sheared to a stated tolerance of plus or minus 0.1 mm. Pick by the thickness and pack that fit the blades you plan, not by grade alone.

What size belt sander for knife making?

The listings here do not state a belt sander size. Makers who grind these bars save time and sanding belts with annealed stock, per the XIOBTQT and Patriot listings. See our belt sander for knife making picks for sizes that suit flat bar stock.

How do I get into knife making?

Start with flat bar stock in a stated grade, such as the 1095 and 80CRV2 bars here, and the tools to cut, grind and heat treat it. The listings here cover stock only, so a forge, grinder and handle material come separately. See our forge burner kit for knife making and wood for knife handles guides.

What do I need to start knife making?

At minimum, steel stock, a way to cut and grind it, a forge or heat source for hardening, and handle material. The five bars here supply the steel in 4, 5 and 12 packs, all 12 inches long. The WENHUALI listing notes its bars suit beginners and experienced makers alike.

Related: knife making, O1 vs 1095 knife steel, carbon vs stainless knife steel, and the knife making and casting hub. Also see our best belt grinder for knife making. Also see our best oil for carbon steel knife. Also see our what is the best knife steel. Also see our high carbon steel sheet metal. Also see our knife blanks full tang.

More related guides (4)

Scoring, line by line

Each bar is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Flat steel bar stock carries no electrical safety listing to state, so every bar here scores zero on that criterion, and no listing here states a warranty term, so every bar scores zero there too; the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Patriot Steel 1095 9.7 30 22 21 n/a 0
Dkoryi 80CRV2 9.6 29 21 22 n/a 0
XIOBTQT 1095 9.6 29 21 20 n/a 0
Yampos 1095 9.6 28 20 21 n/a 0
WENHUALI 1095 9.6 28 20 20 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides