Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Knife Blanks Full Tang (2026)

Four full-tang knife blanks compared on steel, layers, hardness, tang, pins and sheath, scored only from what each listing states.

Best Knife Blanks Full Tang (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VKY 2180 Damascus BlankBest OverallVKY 2180 Damascus Blank9.6/10View on Amazon
  2. 2FBcrafts Damascus BlankBest With SheathFBcrafts Damascus Blank9.6/10View on Amazon
  3. 3SZCO BL-7735 Drop PointBest Stainless StarterSZCO BL-7735 Drop Point9.6/10View on Amazon
  4. 4SZCO BL-7732 Drop PointBest Brass BolsterSZCO BL-7732 Drop Point9.6/10View on Amazon

A knife blank turns handle work into the main job. The steel arrives cut to shape with a full tang ready for scales, so the work shifts to grinding the edge, fitting the handle and finishing the blank into a knife you can hold. This guide compares the best knife blanks full tang on the steel each listing states, the tang and pin holes, the sheath and pins in the box, and the hardness figure where the maker states it.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same.

Quick picks

  • Best Overall VKY 2180 Damascus Blank: Stated 56-58 HRC hardness on 352-layer Damascus, a 9.5 inch overall length and a 5 inch blade, the longest blade here. Check price on Amazon
  • Best With Sheath FBcrafts Damascus Blank: The only blank here with a leather sheath and pins in the box, on 352-layer Damascus with a 9 inch overall length. Check price on Amazon
  • Best Stainless Starter SZCO BL-7735 Drop Point: Treated stainless steel drop point with a steel bolster and dual pin holes, 8 inches overall. Check price on Amazon
  • Best Brass Bolster SZCO BL-7732 Drop Point: Treated stainless steel drop point with a brass bolster and dual pin holes for handle attachment. Check price on Amazon

The machines

Damascus Knife Blanks for Knife Making Supplies

Damascus Knife Blanks for Knife Making Supplies

VKY KNIFE9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9.5 inch Damascus blank with a stated hardness of 56-58 HRC, 352 layers of handmade forged steel and a 5 inch blade.

Pros

  • 352-layer handmade forged Damascus steel with a precise pattern
  • Stated hardness of 56-58 HRC, the only hardness figure here
  • Longest blade here at 5 inches, with a 4.5 inch handle
  • Full tang blank for hunting, skinning, bushcraft and EDC

Cons

  • No sheath or pins in the box
  • 4 mm stock is the thinnest blank here
  • Longest blank here at 9.5 inches; check handle stock and sheath fit
  • No pin holes are stated, so check the tang before ordering handle pins
FBcrafts Damascus Knife Blank Knife Making Kit

FBcrafts Damascus Knife Blank Knife Making Kit

FBcrafts9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9 inch Damascus blank with a leather sheath and pins in the box, 352 layers of handmade forged steel and a 5 mm thick blank.

Pros

  • 352-layer handmade forged Damascus steel with a precise pattern
  • Leather sheath and pins included in the box
  • Full tang blank for hunting, camping and skinning knives
  • 5 mm stock, the thickest blank here

Cons

  • No hardness figure is stated
  • No warranty term is stated
  • 5 mm stock needs more grinding to shape than the 4 mm blank
  • 4.5 inch blade is the shortest blade here
SZCO Supplies BL-7735 Full Tang Stainless Steel

SZCO Supplies BL-7735 Full Tang Stainless Steel

SZCO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8 inch treated stainless drop point blank with a steel bolster, dual pin holes and a 4 inch blade.

Pros

  • Treated stainless steel resists rust and corrosion
  • Steel bolster and dual pin holes for handle attachment
  • Full tang drop point blade, 8 inches overall
  • Stated as a starter blade for makers at all levels

Cons

  • No hardness figure is stated
  • No sheath or pins in the box
  • 4 inch blade is shorter than the 5 inch VKY blade
  • No item weight is stated
SZCO 6.5" Full Tang Stainless Steel Drop Point

SZCO 6.5" Full Tang Stainless Steel Drop Point

SZCO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A treated stainless drop point blank with a brass bolster, dual pin holes, a 4 inch blade and 5 mm thickness.

Pros

  • Treated stainless steel resists rust and corrosion
  • Brass bolster and dual pin holes for handle attachment
  • Full tang drop point blade with an ergonomic handle shape
  • Stated as a starter blade for makers at all levels

Cons

  • No hardness figure is stated
  • No warranty term is stated
  • No sheath or pins in the box
  • 4 inch blade is shorter than the 5 inch VKY blade

Spec sheet comparison

Model Gear Score Overall length Blade length Thickness Steel Hardness In the box
VKY 2180 Damascus Blank 9.6/10 9.5 in 5 in 4 mm 352-layer Damascus 56-58 HRC Not stated
FBcrafts Damascus Blank 9.6/10 9 in 4.5 in 5 mm 352-layer Damascus Not stated Leather sheath and pins
SZCO BL-7735 Drop Point 9.6/10 8 in 4 in 5 mm Stainless steel Not stated Not stated
SZCO BL-7732 Drop Point 9.6/10 8 in 4 in 5 mm Stainless steel Not stated Not stated

Ratings in this table are the makers’ own claims taken from each product page (20 November 2026).

Buying guide: best knife blanks full tang

Damascus layers and steel

Both Damascus blanks here state 352 layers of handmade forged Damascus steel with a precise pattern. The SZCO blanks use treated stainless steel instead, stated as resistant to rust and corrosion. Only the VKY blank states a hardness figure, 56-58 HRC, so the Damascus pair leads on stated steel detail while the stainless pair leads on stated corrosion resistance.

Tang, bolster and pin holes

All four blanks are full tang, so the steel runs through the handle and the scales fasten to the tang itself. The SZCO blanks add a bolster and dual pin holes for handle attachment, brass on the BL-7732 and steel on the BL-7735. The Damascus blanks state no bolster and no pin holes, so check the tang before ordering scales and pins.

Length and thickness

Overall length runs from 8 inches on the SZCO blanks to 9 inches on the FBcrafts blank and 9.5 inches on the VKY blank. Blade length runs from 4 inches on the SZCO blanks to 4.5 inches on the FBcrafts blank and 5 inches on the VKY blank. Thickness is 5 mm on the FBcrafts and SZCO blanks and 4 mm on the VKY blank, and the SZCO blanks state a 1 inch blade width. Handle length is 4.5 inches on the Damascus blanks and 4 inches on the SZCO blanks.

Sheath, pins and handle stock

Only the FBcrafts blank includes a leather sheath and pins in the box. The other three blanks ship as the blank only, so handle scales and pins come separately. Match the scales to the tang length and the pin holes on the blank you choose, and check the sheath fit on the FBcrafts blank before you start grinding.

Use as directed. Grinding a blank throws hot sparks and sharp steel dust, so wear eye and face protection, clamp the work, keep guards in place and keep gloves away from rotating parts. Work in a clear area, keep flammables away from sparks, and check the blank on arrival for the tang, pin holes and sheath fit before you start grinding.

Before You Strike an Arc

  • Check the blank on arrival: tang shape, pin holes, and sheath fit on the FBcrafts blank.
  • Match handle scales and pins to the tang and the pin holes before grinding.
  • Clamp the blank for grinding, keep guards in place, and wear eye and face protection.
  • Confirm the overall length and blade length against your handle stock before shaping the edge.

FAQ for welders

What does full tang mean on a knife blank?

A full tang blank carries the steel through the full handle, so the handle scales fasten to the tang itself. All four blanks here are full tang. The SZCO blanks add dual pin holes and a bolster for handle attachment, while the Damascus blanks state a full tang body with no bolster stated.

What is Damascus steel on a knife blank?

Damascus steel is layered steel forged into a pattern. Both Damascus blanks here state 352 layers of handmade forged Damascus steel. The SZCO blanks use treated stainless steel instead, stated as resistant to rust and corrosion.

What hardness should a knife blank be?

Only one listing here states a hardness figure: the VKY 2180 blank states 56-58 HRC. The other three blanks state no hardness figure, so compare them on steel type and thickness instead. Check the hardness on the listing before you buy if it matters for your edge.

Do knife blanks come with a sheath?

Only the FBcrafts blank in this guide includes a leather sheath in the box, along with pins for the handle. The other three blanks ship as the blank only, so plan on a sheath separately if you want one. Check what is in the box on the listing before you order.

Related: knife blanks full tang, best high carbon steel for knife making, best 1×30 belt sander for knife making, best belt grinder for knife making, and knife making parts.

Scoring, line by line

Each blank is scored on performance, build, value, safety listing and warranty. Knife blanks carry no electrical safety listing and no listing here states a warranty term, so every blank here scores zero on safety and warranty; the ranking comes from performance, build and value, judged on the steel, dimensions and extras each listing states.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
VKY 2180 Damascus Blank 9.6 30 21 21 n/a 0
FBcrafts Damascus Blank 9.6 29 21 21 n/a 0
SZCO BL-7735 Drop Point 9.6 28 20 21 n/a 0
SZCO BL-7732 Drop Point 9.6 28 20 20 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides