O1 vs 1095 Knife Steel: Which One Should You Buy?
O1 vs 1095 knife steel, compared on Texas Knifemakers Supply, TITGGI and Dkoryi stock: thickness, size, pack count and who each bar suits.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
O1 Precision Ground Tool Steel Flat Bar 1/8" x9.6/10View on Amazon - 2
O1 Tool Steel Precision Ground Flat Stock 3/16" x9.6/10View on Amazon - 3
12Pcs 1095 Carbon Steel Bar Cold Rolled for Knife9.6/10View on Amazon - 4
TITGGI 5 Pack 1095 Steel Flat Bar for Knife9.5/10View on Amazon
Verdict. O1 is the pick for a maker who wants precision ground flat stock in a set thickness, with the Texas bars sold one at a time in 3/16 inch and 1/8 inch. 1095 is the pick for a maker who wants several blanks at once, with the TITGGI pack and the Dkoryi 12-pack both cut 12 inches long and 1-1/2 inches wide. Each bar here arrives annealed and ready to shape before heat treatment.
The o1 vs 1095 knife steel question comes up at the bench when a maker has a blade in mind and needs flat stock to start from. The O1 bars here arrive as precision ground stock, the 1095 bars as cold rolled stock, and all four listings sell annealed stock for knife making. This comparison sets the two Texas O1 bars against the two 1095 packs on what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The four bars

O1 Precision Ground Tool Steel Flat Bar 1/8" x
A 1/8 inch by 1-1/2 inch by 12 inch O1 precision ground flat bar, annealed for machining, grinding and shaping before heat treatment.
Pros
- 1/8 inch thick by 1-1/2 inch wide by 12 inch long, precision ground
- Annealed for machining, grinding, shaping and fabrication before heat treatment
- Oil-hardening high carbon tool steel for knife blades and cutting tools
- Clean ground surface for custom knife blades and precision tooling
Cons
- Single bar; no multi-bar pack is stated
- Thin 1/8 inch stock suits slim blades more than heavy blades
- No protective packaging is stated
- Arrives annealed, so heat treatment still lies ahead before the blade is finished

O1 Tool Steel Precision Ground Flat Stock 3/16" x
A 3/16 inch by 2 inch by 12 inch O1 precision ground flat bar, annealed for machining, drilling, milling, grinding and shaping before heat treatment.
Pros
- 3/16 inch thick by 2 inch wide by 12 inch long, precision ground
- Annealed for machining, drilling, milling, grinding and shaping before heat treatment
- Oil-hardening high carbon tool steel for knife making, tooling and machining
- Precision ground surfaces for work where flatness and thickness matter
Cons
- Single bar; no multi-bar pack is stated
- No protective packaging is stated
- Arrives annealed, so heat treatment still lies ahead before the blade is finished
- 1.28 pounds, heavier than the 0.72 pound 1/8 inch bar

12Pcs 1095 Carbon Steel Bar Cold Rolled for Knife
A 12-pack of 1095 carbon steel bars, cold rolled and pre-annealed, each 12 inches by 1-1/2 inches by 1/8 inch.
Pros
- 12 bars in the pack, so one order covers several blades
- Cold rolled and pre-annealed for grinding and polishing
- Pre-deburred edges and a mill-scale-free surface for immediate work
- Precision-sheared to a ±0.1mm tolerance
Cons
- No weight is stated for the pack or a single bar
- No warranty term is stated
- 1/8 inch thickness suits slim blades more than heavy blades
- 12 bars is more stock than a maker who wants a single blade needs

TITGGI 5 Pack 1095 Steel Flat Bar for Knife
A 5-pack of 1095 steel flat bars, annealed and cold rolled, each 12 inches by 1-1/2 inches by 0.12 inch.
Pros
- Annealed and cold rolled for easy machining and shaping
- Three layers of rust-proof packaging: rust-proof oil, rust-proof paper and bubble bags
- Smooth finish for cutting and shaping
- Maker claims super toughness for handmade knives
Cons
- No warranty term is stated
- 0.12 inch thickness suits slim blades more than heavy blades
- No tolerance figure is stated for the bar size
- No single-bar option is stated for a maker who wants one blank
Other welders and gear to compare
1095 Steel Flat Stock for Knife Making-Annealed High CarbonCheck price on Amazon
Patriot Steel 1095 High Carbon Knife Making & Forging SteelCheck price on Amazon
Patriot Steel 5160 High Carbon Knife Making & Forging SteelCheck price on Amazon
Yampos 5 Pack 1095 High Carbon Steel Flat BarCheck price on Amazon
5 Pack 1084 Steel for Knife MakingCheck price on Amazon
TITGGI 5 Pack 1095 Steel Flat Bar for Knife MakingCheck price on Amazon
O1 vs 1095 knife steel: side by side
| Texas O1 1/8 x 1-1/2 x 12 | Texas O1 3/16 x 2 x 12 | Dkoryi 1095 12-Pack | TITGGI 1095 5-Pack | |
|---|---|---|---|---|
| Gear Score | 59 | 58 | 56 | 54 |
| Steel | O1 | O1 | 1095 | 1095 |
| Thickness | 1/8 in | 3/16 in | 1/8 in | 0.12 in |
| Width | 1-1/2 in | 2 in | 1.5 in | 1.5 in |
| Length | 12 in | 12 in | 12 in | 12 in |
| Pack | 1 bar | 1 bar | 12 pack | 5 pack |
| Weight | 0.72 lb | 1.28 lb | Not stated | 3.13 lb |
| Finish | Precision ground | Precision ground | Cold rolled, pre-annealed | Cold rolled, annealed |
| Warranty | Not stated | Not stated | Not stated | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (14 November 2026). No listing states a CSA, UL or ETL listing, and none states a warranty term.
The two steels
The O1 bars here arrive as precision ground flat stock. The Texas listings call O1 a versatile oil-hardening high carbon tool steel for knife making, machining, toolmaking, dies, punches, gauges, cutting tools and fabrication, and both bars are supplied annealed. The 1095 bars here arrive as cold rolled flat stock. The TITGGI and Dkoryi listings call 1095 a high carbon steel for knife making, annealed and cold rolled. The TITGGI pack states a smooth finish for cutting and shaping, and the Dkoryi bars state a mill-scale-free surface for immediate grinding and polishing.
Both steels are sold as knife making stock, and both arrive annealed. The split in these listings is about form: precision ground single bars on the O1 side, and cold rolled multi-bar packs on the 1095 side.
Thickness and size
Thickness is where the four bars differ most. The Texas O1 bars are 3/16 inch and 1/8 inch thick, while the 1095 bars are 0.12 inch and 1/8 inch thick. Width runs 2 inches on the thick O1 bar and 1-1/2 inches on the other bars. Every bar is 12 inches long, so length is the one size all four listings agree on.
That shared 12 inch length makes thickness the real choice. A 3/16 inch bar leaves more stock to work from, while a 1/8 inch or 0.12 inch bar starts slimmer. The listings state no hardness figure, so thickness and width are the sizes a buyer can compare here. The Texas O1 bars weigh 1.28 pounds for the 3/16 inch bar and 0.72 pounds for the 1/8 inch bar, while the TITGGI pack weighs 3.13 pounds for the whole pack. The Dkoryi listing states no weight at all.
Pack counts
The O1 side sells one bar at a time. Each Texas listing states one precision ground bar, so a maker who wants spares orders more than one. The 1095 side sells packs: the Dkoryi listing states a 12-pack, and the TITGGI listing states a 5-pack in its title. A maker who wants several blanks from one order finds them on the 1095 side.
One count needs a check. The TITGGI bullets state that each package contains four 1095 steel bars, against the 5-pack in the title, so the pack count is unclear. The Dkoryi count is plain: a 12-pack set.
Annealed and ready to shape
All four listings state annealed stock. The Texas O1 bars are supplied annealed for machining, drilling, milling, grinding and shaping before heat treatment, with precision ground surfaces for work where flatness and thickness matter. The TITGGI 1095 is annealed to improve machinability, and the maker states it saves time and abrasive belts. The Dkoryi 1095 is pre-annealed and laser cut to reduce warpage, with a mill-scale-free surface for immediate grinding and polishing.
Annealed means the steel arrives ready to shape, not finished. Heat treatment still lies ahead for every bar here, and the listings give no heat treat steps, so the maker instructions govern that step. A forge burner kit made for knife making covers the heating side; see the best forge burner kit for knife making guide.
Choose O1 if
- You want precision ground stock with a clean, consistent surface.
- You want one bar in a set thickness, 3/16 inch or 1/8 inch.
- You machine, drill, mill and grind before heat treatment.
- You want an oil-hardening steel the maker lists for knives and cutting tools.
Choose 1095 if
- You want several blanks in one order, a 12-pack or a multi-bar pack.
- You want cold rolled stock for cutting and shaping.
- You want the TITGGI pack’s rust-proof packaging with oil, paper and bubble bags.
- You want a high carbon steel the maker lists for handmade knives.
How the bars scored
The Gear Score weighs performance, build, value, safety and warranty. No listing states a safety standard or a warranty term, so safety and warranty score 0 across the four bars. The O1 bars score higher for clear precision ground sizes, while the TITGGI pack scores lower for its conflicting pack count. How we pick explains the weights.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Texas O1 1/8 x 1-1/2 x 12 | 9.6 | 29 | 21 | 21 | n/a | 0 |
| Texas O1 3/16 x 2 x 12 | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Dkoryi 1095 12-Pack | 9.6 | 28 | 20 | 20 | n/a | 0 |
| TITGGI 1095 5-Pack | 9.5 | 27 | 20 | 19 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.
Before you strike an arc. Check each bar on arrival, and keep the TITGGI pack’s rust-proof oil and paper on until the bars are shaped. Heat treat outdoors or with strong ventilation, with dry tools and molds only, a full face shield and leather PPE. Never melt unknown or sealed scrap, and never leave a lit forge unattended.
FAQ for welders
Is O1 or 1095 better for a first knife?
Both sides sell annealed stock for knife making, and the listings state no heat-treat steps or hardness figures. O1 comes as precision ground single bars in 3/16 inch and 1/8 inch, while 1095 comes in multi-bar packs at 0.12 inch and 1/8 inch. Pick the thickness and pack count that fits the blade.
What size are these bars?
Every bar is 12 inches long. The O1 bars are 3/16 inch by 2 inches and 1/8 inch by 1-1/2 inches, and the 1095 bars are 12 inches by 1-1/2 inches by 0.12 inch and 1/8 inch.
Do these bars come annealed?
Yes. All four listings state annealed stock: the O1 bars for machining, drilling, milling, grinding and shaping before heat treatment, and the 1095 bars as cold rolled and annealed for cutting and shaping.
How many bars come in the TITGGI pack?
The listing is unclear: the title states a 5-pack, while the bullets state that each package contains four 1095 steel bars. Check before ordering.
Can you machine these bars before heat treatment?
Yes, that is what the annealed condition is for. The O1 listings state machining, drilling, milling, grinding and shaping before heat treatment, the TITGGI listing states good machinability, and the Dkoryi bars are pre-annealed for immediate grinding and polishing.
Related: 1095 vs D2 knife steel, carbon vs stainless knife steel, knife casting guides, and the knife making hub. Also see our sand casting vs investment casting. Also see our g10 vs micarta knife scales. Also see our 1095 vs 52100 knife steel. Also see our best wood for knife handles. Also see our best oil for carbon steel knife.
More related guides (11)
- best knife sharpener for d2 steel
- best rated belt sander
- best fr shirts for summer
- high carbon steel utility knife blades
- high carbon steel jigsaw blades
- cast iron ingot molds
- steel ingot molds
- best small leather knife sheath under 15
- cast iron vs steel ingot molds
- best belt sander under 150
- hand made leather knife sheaths




