1095 vs 52100 Knife Steel: Which One Should You Buy?
All 4 listings in this guide are 1095 steel, with no 52100 bar listed, so the comparison covers the 1095 sizes, pack counts, annealing states and packaging stated in the listings.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
12Pcs 1095 Carbon Steel Bar Cold Rolled for Knife Making9.6/10View on Amazon - 2
O1 Precision Ground Tool Steel Flat Bar 1/8" x 1-1/2" x 12"9.6/10View on Amazon - 3
TITGGI 5 Pack 1095 Steel Flat Bar for Knife Making9.5/10View on Amazon - 4
TITGGI 8 Pack 1095 Steel Flat Bar for Knife MakingView on Amazon - 5
1095 Steel Flat Stock for Knife Making-Annealed High CarbonView on Amazon - 6
12"x2"x0.12" 1095 Steel for Knife MakingView on Amazon - 7
12"x1.5"x1/8" 1095 Steel for Knife MakingView on Amazon - 8
12"x1.5"x1/8" 1095 Steel Flat Bar Metal Bar StockView on Amazon - 9
View on Amazon
A new blade starts with the bar, and 1095 vs 52100 knife steel is the choice a maker weighs before the first cut. This guide states the position plainly: no 52100 bar is listed here, so the comparison rests on the 1095 flat bars in the listings below. From the stated facts, the choice among the listed bars comes down to size, pack count and annealing state, and 1095 is the steel on offer in the listings in this guide.
Other welders and gear to compare
TITGGI 8 Pack 1095 Steel Flat Bar for Knife MakingCheck price on Amazon
1095 Steel Flat Stock for Knife Making-Annealed High CarbonCheck price on Amazon
12"x2"x0.12" 1095 Steel for Knife MakingCheck price on Amazon
12"x1.5"x1/8" 1095 Steel for Knife MakingCheck price on Amazon
12"x1.5"x1/8" 1095 Steel Flat Bar Metal Bar StockCheck price on Amazon
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
1095 vs 52100 knife steel
The listings in this guide cover the 1095 side of the comparison. All 4 listings are 1095 high-carbon steel flat bar stock for knife making, and none lists a 52100 bar, so the 52100 side of the comparison has no stated size, pack count or packaging to compare. The rest of this guide compares the 1095 bars against each other on the facts the listings state.
What the listings state: TITGGI and XIOBTQT state cold rolled, annealed flat stock, and three layers of rust-proof packaging in oil, paper and bubble wrap or bubble bags. TITGGI cites toughness and grindability for handmade knives, and XIOBTQT cites the same for hand DIY blades. WENHUALI states untreated bars with a smooth surface and machinability, and excellent hardness and wear resistance. TITGGI states its bars are annealed to improve machinability, while WENHUALI states its bars are untreated and allow easy annealing, so the annealing step stays with the maker. XIOBTQT calls 1095 the highest carbon grade and states that billets of high-carbon steel give excellent heat treatment results.
So which steel should you buy? From the listings in this guide, 1095 is the steel you can buy, in annealed or untreated bar stock. No 52100 bar is listed here, so this guide cannot rank 52100 against 1095 on stated facts. Pick the 1095 bar by the size, pack count and annealing state that fit the blade you plan to make.
Side by side
| 1095 steel | 52100 steel | Notes | |
|---|---|---|---|
| Bars listed here | 4 listings | None listed | Every listing in this guide is 1095 steel |
| Form | Annealed or untreated flat bar stock | None listed | TITGGI and XIOBTQT state annealed; WENHUALI states untreated |
| Sizes listed | 12 x 1.5 x 0.12 in; 12 x 2 x 0.24 in | None listed | 2 sizes across the 4 listings |
| Pack counts | 2, 4, 5 and 8 pieces | None listed | 1 pack count per listing |
| Packaging | Rust-proof oil, paper and bubble wrap | None listed | TITGGI and XIOBTQT state three layers; WENHUALI states no packaging |
| Heat treatment | Excellent results stated for high-carbon billets | None listed | XIOBTQT states this for high-carbon billets |
Every figure in the table comes from the listings. The 52100 column reads None listed throughout because no 52100 bar appears in the listings for this guide.
The 1095 bars listed here
The thinner bar measures 12 x 1.5 x 0.12 in and the thicker bar measures 12 x 2 x 0.24 in. The thinner bar comes in packs of 4 and 8, and the thicker bar comes in packs of 2 and 5. Annealed stock suits cutting and shaping from the bar, while the untreated stock suits a maker who wants to control the annealing step.
- TITGGI 8-pack. 8 bars of 12 x 1.5 x 0.12 in annealed cold rolled stock, in three layers of rust-proof packaging. TITGGI describes 1095 as its pick for knife making, citing toughness and grindability for handmade knives.
- XIOBTQT 4-pack. 4 bars of 12 x 1.5 x 0.12 in annealed stock, listed at 2.37 lb, in three layers of rust-proof packaging. XIOBTQT calls 1095 the highest carbon grade.
- WENHUALI 2-pack. 2 bars of 12 x 2 x 0.24 in untreated stock, listed for DIY forging and custom blade work, with stated hardness and wear resistance.
- WENHUALI 5-pack. 5 bars of 12 x 2 x 0.24 in untreated stock, the larger pack of the thicker bar, for the same forging and custom blade work.
FAQ for welders
Is 1095 steel good for knife making?
The makers say so. TITGGI calls its 1095 bar its pick for knife making and cites toughness and grindability for handmade knives, and XIOBTQT states that billets of high-carbon steel give excellent heat treatment results. WENHUALI states its 1095 bar gives excellent hardness and wear resistance for reliable knife performance.
Does 1095 flat bar come annealed?
It depends on the listing. TITGGI and XIOBTQT state their bars are annealed and cold rolled. WENHUALI states its bars are untreated 1095 that allows easy annealing, so the annealing step stays with the maker.
What sizes of 1095 flat bar are listed here?
2 sizes are listed: 12 x 1.5 x 0.12 in and 12 x 2 x 0.24 in. The thinner bar comes in packs of 4 and 8, and the thicker bar comes in packs of 2 and 5.
How is 1095 flat bar packaged?
TITGGI and XIOBTQT state three layers of rust-proof packaging: rust-proof oil, rust-proof paper and bubble wrap or bubble bags. The packaging is stated to prevent rusting and damage.
Is there a 52100 bar in this guide?
No. All 4 listings in this guide are 1095 steel, and none lists a 52100 bar. The comparison above states what the 1095 listings give, and the 52100 side has no stated facts to compare.
Related: 1095 vs D2 knife steel, carbon vs stainless knife steel, O1 vs 1095 knife steel, and the knife making and casting hub. See also the best belt grinder for knife making and the best forge burner kit for knife making.




