Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Forge Burner Kit for Knife Making (2026): 3 Picks for the Home Shop

Three propane forge kits that reach 2600°F, compared on burner count, heat output, doors, insulation and the parts each listing states.

Best Forge Burner Kit for Knife Making (2026): 3 Picks for the Home Shop
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1MMasters 3 BurnerStrongest Stated OutputMMasters 3 Burner9.6/10View on Amazon
  2. 2Nelyrho 3-BurnerStainless Shell, Double DoorsNelyrho 3-Burner9.6/10View on Amazon
  3. 3MMasters 4 BurnerMost BurnersMMasters 4 Burner9.5/10View on Amazon

A blade blank goes into the forge cold and stiff, and it comes out ready to shape under the hammer. That change from stiff stock to workable steel is the whole job, and the best forge burner kit for knife making heats the blank evenly, holds heat while you work, and fits the way you forge at home. This guide compares the propane forge kits in the list below on what the listings state: burner count, heat output, doors, insulation and the parts that come in the box.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Strongest Stated Output MMasters 3 Burner: The only pick that states a BTU figure, 135,000 BTU, with 3 burners, a 30 PSI regulator, dual doors, gloves and two fire bricks. Check price on Amazon
  • Stainless Shell, Double Doors Nelyrho 3-Burner: A thickened stainless steel shell, double doors and a 0-30 PSI regulator, with a firebrick and a stated 2600°F max. Check price on Amazon
  • Most Burners MMasters 4 Burner: 4 burners with 1-inch insulation plus a fire brick, stated to reach 2600°F, in a single-door body. Check price on Amazon

The machines

MMasters 3 Burner Propane Forge Kit

MMasters 3 Burner Propane Forge Kit

Molten Masters9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3 burner propane forge kit that states 135,000 BTU and 2600°F, with a 30 PSI regulator and hose, dual doors, heat-resistant gloves and two replaceable fire bricks.

Pros

  • States 135,000 BTU, the only output figure in this guide
  • 3 burners with a 30 PSI regulator and hose, stated to reach 2600°F
  • Dual door design: openable door for loading, fixed door for heat stability
  • Heat-resistant gloves and two replaceable fire bricks included

Cons

  • No shell material stated in the listing
  • No warranty term stated
  • Listing recommends a rigidizer or protective coating on the insulation before use
  • Hose must be disconnected after use to avoid heat damage
Nelyrho 3-Burner Propane Forge Kit with Double

Nelyrho 3-Burner Propane Forge Kit with Double

Nelyrho9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3 burner propane forge kit with double doors, a 0-30 PSI regulator and a firebrick, built with a thickened stainless steel shell and stated to reach 2600°F.

Pros

  • 0-30 PSI regulator lets gas pressure adjust for different workpieces
  • Double doors close to hold heat or open to feed longer blades and bars
  • Thickened stainless steel shell for repeated high-temperature use
  • Firebrick included for a stable surface under heated metal

Cons

  • Bullet heading says dual-burner while the title and the same bullet say 3 burners
  • No BTU figure stated
  • No warranty term stated
  • Listing recommends refractory material or rigidizer on the insulation before use
MMasters 4 Burner Propane Blacksmith Forge Kit

MMasters 4 Burner Propane Blacksmith Forge Kit

Molten Masters9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4 burner propane forge kit with a single door mode, 1-inch insulation plus a fire brick, stated to reach 2600°F and built for home workshops and beginners.

Pros

  • 4 burners, the most in this guide
  • 1-inch insulation plus a fire brick for dual protection
  • Single-door mode opens or closes as needed; closed it heats up more quickly
  • Ready to start by connecting the gas hose and burner

Cons

  • No BTU figure stated
  • No regulator pressure stated
  • No accessories stated in the listing
  • No warranty term stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Burners Max temperature Regulator Doors Insulation Included parts
MMasters 3 Burner 9.6/10 3 2600°F 30 PSI Dual doors Ceramic fiber blanket Gloves, two fire bricks
Nelyrho 3-Burner 9.6/10 3 2600°F 0-30 PSI Double doors Fire-resistant insulation Firebrick
MMasters 4 Burner 9.5/10 4 2600°F Not stated Single door 1-inch insulation, fire brick Not stated

Ratings in this table are the makers’ own claims taken from each product page (11 November 2026).

Buying guide: what matters in the best forge burner kit for knife making

Burner count and heat output

Burner count sets how much of the chamber gets heat at once. The MMasters 4 Burner kit has 4 burners, the most here, while the MMasters 3 Burner kit and the Nelyrho kit have 3 burners. Only the MMasters 3 Burner kit states a BTU figure, 135,000 BTU, so it is the only pick with a stated output number to compare. All three kits state a max of 2600°F. A higher burner count without a stated BTU figure still leaves the output unpinned, so weigh the stated figure against the burner count rather than reading count alone as output.

Doors and heat retention

Doors decide how much heat stays in the chamber. The MMasters 3 Burner kit has a dual door design: the openable door loads small knives and workpieces, while the fixed door holds heat steady during forging. The Nelyrho kit has double doors that close to concentrate heat around the workpiece; open one side during extended forging to improve airflow and manage chamber heat, or feed longer blades and metal bars through. The MMasters 4 Burner kit uses a single-door mode that opens or closes as needed, and closed it heats up more quickly. Match the door layout to the work: short blades load fine through a small opening, while longer bars need a door that passes them through.

Regulator and gas pressure

The regulator sets gas pressure, and pressure sets how hard the burners run. The MMasters 3 Burner kit comes with a 30 PSI regulator and hose. The Nelyrho kit comes with a 0-30 PSI regulator, so pressure adjusts for different workpieces and forging jobs. The MMasters 4 Burner kit states no regulator pressure, so check the listing for the regulator spec before buying if pressure adjustment matters to you.

Insulation and firebrick

Insulation holds heat in the chamber and protects the shell. The MMasters 4 Burner kit states 1-inch insulation material plus a fire brick, which the listing calls dual protection. The Nelyrho kit has an insulated chamber and a firebrick that gives a stable surface for heated metal. The MMasters 3 Burner kit states ceramic fiber blanket insulation and includes two replaceable fire bricks. All three listings recommend a rigidizer or protective coating on the insulation: the MMasters kits say to apply a rigidizer or protective coating to the ceramic fiber blanket, and Nelyrho recommends refractory material or rigidizer on the fire-resistant insulation. Treat that coating step as part of setup, not an optional extra.

Included parts and setup

What comes in the box changes the day you start in the shop. The MMasters 3 Burner kit includes heat-resistant gloves and two replaceable fire bricks. The Nelyrho kit includes a firebrick, and the hose and 30 PSI regulator connect to compatible standard propane cylinders. The MMasters 4 Burner kit states no included accessories beyond the forge, hose and burner, so plan on gloves and a firebrick separately if you need them.

Use as directed. Run a propane forge outdoors in a well-ventilated area, close the tank valve after use, and let the forge cool completely before disconnecting anything. Disconnect the hose after use so residual heat does not damage it, and keep flammable material clear of the forge while it runs.

Before You Strike an Arc

  • Check the listing for the regulator and hose: the MMasters 3 Burner kit states a 30 PSI regulator and hose, and the Nelyrho kit states a 0-30 PSI regulator and hose.
  • Coat the insulation before firing: rigidizer or protective coating on the ceramic fiber blanket, or refractory material or rigidizer on the fire-resistant insulation, as each listing recommends.
  • Check the doors on arrival: the openable door should load small knives and workpieces, and the fixed door should hold heat steady.
  • Set the forge outdoors in a well-ventilated area with the tank valve in easy reach, and keep a firebrick under the workpiece.
  • Check that the firebrick is in the box where the listing states it: the MMasters 3 Burner kit states two replaceable fire bricks, and the Nelyrho kit states a firebrick.

FAQ for welders

How hot does a propane forge burner kit get?

All three kits here state a max of 2600°F. The MMasters 3 Burner kit also states 135,000 BTU from 3 burners, which is the only stated BTU figure in this guide. Temperature alone does not say how fast a given blank heats, so weigh the stated output and burner count together.

How many burners does a forge need for knife making?

The kits here have 3 or 4 burners, and all state 2600°F. A 3 burner kit with a stated 135,000 BTU figure gives a concrete output number, while the 4 burner kit states no BTU figure. For knife-sized blanks, burner layout and door fit matter as much as count: a door that passes longer blades through suits longer stock.

Do I need to coat the insulation in a new propane forge?

Yes, according to all three listings here. The MMasters kits recommend a rigidizer or protective coating on the ceramic fiber blanket insulation, and Nelyrho recommends refractory material or rigidizer on the fire-resistant insulation. Coat it before firing.

What regulator comes with a propane forge kit?

The MMasters 3 Burner kit states a 30 PSI regulator and hose, and the Nelyrho kit states a 0-30 PSI regulator and hose, so pressure adjusts for different workpieces. The MMasters 4 Burner kit states no regulator pressure. Check the regulator spec on the listing before buying if adjustable pressure matters to you.

Can I run a propane forge indoors?

No. The Nelyrho listing says to operate outdoors in a well-ventilated area. Close the tank valve after use and let the forge cool completely before disconnecting.

Related: metal fab tools, best 2 burner forge, best propane forge for blacksmithing, and best belt grinder for knife making.

Scoring, line by line

Each forge kit is scored on performance, build, value, safety and warranty, with the weights published on the site method page. No listing here states a warranty term, so every kit scores zero on warranty, and the ranking comes from the other criteria. Safety scores reflect the safety guidance and parts each listing states, such as gloves, insulation protection and hose handling.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
MMasters 3 Burner 9.6 32 21 21 7 0
Nelyrho 3-Burner 9.6 29 21 20 7 0
MMasters 4 Burner 9.5 28 20 20 6 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.

More buying guides