Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Steel Ingot Molds (2026): 5 Picks for the Home Foundry

Five steel, cast iron and graphite ingot molds for gold, silver, copper, aluminum and brass, compared on capacity, cavity size, release and the warranty each listing states.

Best Steel Ingot Molds (2026): 5 Picks for the Home Foundry
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Nelyrho 50 oz Cast IronBest OverallNelyrho 50 oz Cast Iron9.7/10View on Amazon
  2. 2Tesllightt 8×8 SteelLargest CapacityTesllightt 8×8 Steel9.7/10View on Amazon
  3. 3Haizusai 1 kg Graphite 4-PackBest Graphite SetHaizusai 1 kg Graphite 4-Pack9.6/10View on Amazon
  4. 4Bonbo 25 oz Cast IronBest Small LoafBonbo 25 oz Cast Iron9.5/10View on Amazon

A pour starts with the mold. The metal is molten, the crucible is heavy, and the mold has to sit flat, stay dry and let the bar out clean once it cools. A mold that sticks, tips or spits moisture back at the pour wastes the melt and the afternoon. This guide rounds up the best steel ingot molds for a home foundry, scored on what each listing states: capacity, cavity size, material, release and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Nelyrho 50 oz Cast Iron: A 50 troy ounce cast iron mold with a stated cavity size, an integrated handle, four raised feet and the only stated warranty here, 1 year. Check price on Amazon
  • Largest Capacity Tesllightt 8×8 Steel: A 2 L steel mold in 5 mm steel, 8 x 8 x 7 inches, with stated capacities of 34.6 kg of gold and 16 kg of brass. Check price on Amazon
  • Best Graphite Set Haizusai 1 kg Graphite 4-Pack: Four 1 kg graphite molds rated to 2000C, with stated cavity dimensions and no release agent needed. Check price on Amazon
  • Best Small Loaf Bonbo 25 oz Cast Iron: A 25 troy ounce cast iron loaf mold with a handle and tapered sides for easy release. Check price on Amazon

The machines

Nelyrho 50 Troy Ounce Cast Iron Ingot Mold

Nelyrho 50 Troy Ounce Cast Iron Ingot Mold

Nelyrho9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 50 troy ounce cast iron mold with a stated cavity size, an integrated handle and four raised feet, plus a 1 year warranty.

Pros

  • States its cavity size, 3.9 x 1.8 x 1.7 inches, for a 50 troy ounce gold ingot
  • Integrated handle and four raised feet lift the mold off the work surface
  • Tapered inner walls help the ingot release after cooling
  • 1 year warranty stated in the listing

Cons

  • Handle becomes hot during use, per the maker
  • Casts one ingot at a time, so batch work is slow
  • Needs gradual preheating and a fully dry mold before each pour
  • 50 troy ounce capacity suits small pours only; larger melts need repeat pours
Extra Large Steel Ingot Mold

Extra Large Steel Ingot Mold

Tesllightt9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2 L steel mold, 8 x 8 x 7 inches in 5 mm steel, with four support feet and stated capacities for brass, gold and silver.

Pros

  • Largest capacity here at 2 L, with stated figures of 34.6 kg gold, 18.7 kg silver and 16 kg brass
  • 5 mm thick steel with a heat-resistant coating and a polished inner surface
  • Four support feet and reinforced steel bars at the base
  • Suits gold, silver, copper, aluminum, brass and other common non-ferrous metals

Cons

  • No warranty term is stated
  • Weighs 9.6 lb empty, so moving a full mold takes care
  • Needs high-temperature lubricant, anti-seize paste or graphite coating before each use
  • Release timing is fussy: remove the ingot after it gains basic strength, not after full cooling
4 Pcs 1kg High-Purity Graphite Ingot Molds

4 Pcs 1kg High-Purity Graphite Ingot Molds

haizusai9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Four 1 kg graphite molds rated to 2000C, with stated cavity dimensions and a self-lubricating surface that needs no release agent.

Pros

  • Four identical molds allow batch pours in one session
  • Rated to 2000C, with stated outer and cavity dimensions
  • Self-lubricating graphite releases ingots without added release agent
  • Casts a standard rectangular ingot of about 1 kg of gold or 530 g of silver

Cons

  • No warranty term is stated
  • Each mold holds about 1 kg of gold, so larger melts need several pours
  • Small cavity size suits small bars only
  • Four molds to store, dry and keep track of instead of one
25 oz Troy Ounce Gold Bar Loaf Cast Iron Ingot

25 oz Troy Ounce Gold Bar Loaf Cast Iron Ingot

Bonbo9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 25 troy ounce cast iron loaf mold with a handle and tapered sides, for gold, silver, copper, aluminum and brass.

Pros

  • Handle helps control the mold during the pour
  • Tapered sides let the loaf bar drop out when the mold is turned over
  • Cast iron body, stated for thermal conductivity and wear resistance
  • 30-day refund window stated if the mold does not satisfy

Cons

  • Smallest capacity here at 25 troy ounces
  • Cavity is not smooth inside like graphite molds, per the maker
  • One loaf per pour, so batch work takes repeat pours
  • Loaf bars only; the listing states no other ingot shape
100 oz Cast Steel Ingot Mold for Melting Casting

100 oz Cast Steel Ingot Mold for Melting Casting

Camoo9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 100 ounce cast steel loaf mold with a slight wall taper, for gold, silver, copper, aluminum and brass.

Pros

  • 100 ounce capacity is the largest stated ounce capacity here
  • Steel body with stated thermal stability, corrosion resistance and impact resistance
  • Slight wall taper helps the loaf bar release
  • Suits laboratory and school science education use, per the maker

Cons

  • No handle is stated for moving a full mold
  • No mold or cavity dimensions are stated
  • Bar weight varies with the metal and how full the cavity is filled, per the maker
  • Loaf bars only; no other ingot shape is stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Capacity Material Cavity size Handle Warranty
Nelyrho 50 oz Cast Iron 9.7/10 Up to 50 troy oz gold Cast iron 3.9 x 1.8 x 1.7 in Integrated 1 year
Tesllightt 8×8 Steel 9.7/10 2 L; about 34.6 kg gold Steel, 5 mm Not stated Not stated None stated
Haizusai 1 kg Graphite 4-Pack 9.6/10 About 1 kg gold per mold Graphite 3.54 x 1.57 x 0.78 in Not stated None stated
Bonbo 25 oz Cast Iron 9.5/10 Up to 25 troy oz gold Cast iron Not stated Handle None stated
Camoo 100 oz Cast Steel 9.4/10 About 100 oz of metal Steel Not stated Not stated None stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 20 November 2026.

Buying guide: choosing the best steel ingot molds for a home foundry

Capacity and cavity size

Capacity decides how much metal one pour makes. The molds here state 25 troy ounces, 50 troy ounces and about 100 ounces, plus a 1 kg graphite mold and a 2 L steel mold. The Tesllightt gives approximate capacities by metal: 34.6 kg of gold, 18.7 kg of silver and 16 kg of brass, varying with material density and pouring conditions. Only two listings state a cavity size: the Nelyrho at 3.9 x 1.8 x 1.7 inches and the haizusai at 3.54 x 1.57 x 0.78 inches.

Material: cast iron, steel and graphite

Two molds here are cast iron, two are steel and one set is graphite. The cast iron molds state good thermal conductivity and wear resistance. The Tesllightt states 5 mm steel with a heat-resistant coating, and the Camoo states steel with thermal stability, corrosion resistance and impact resistance. The graphite set states high-density, fine-grained graphite with ash content under 0.1%, rated to 2000C.

Release: taper, polish and coating

Every mold here states some way to free the bar. The Nelyrho, Bonbo and Camoo use tapered walls, and the Nelyrho and Bonbo ask you to invert the mold once the metal has cooled. The Tesllightt pairs a polished inner surface with a heat-resistant coating and asks for high-temperature lubricant, anti-seize paste or graphite coating on the surface and seams before each use. The graphite molds need no release agent: tap the mold and the ingot comes out. The Tesllightt should come out after the metal has gained basic strength, not after full cooling, or release gets harder.

Preheat and dry

Every maker here stresses dry molds and preheating. The Nelyrho must be clean and completely dry before first use, then gradually preheated to drive off residual moisture. The Tesllightt should be preheated before molten metal goes in and must be fully dry, which helps reduce thermal shock. The graphite set stores in a cool, dry place. Dry the mold and preheat it every time.

Handle and base

A handle and a steady base matter once the mold holds molten metal. The Nelyrho has an integrated handle and four raised feet that lift the base above the work surface, and the Bonbo has a handle for control during the pour. The Tesllightt has four support feet and reinforced steel bars at the base. The Camoo and the graphite set state no handle.

Use as directed. Melt outdoors or with strong ventilation, use dry tools and molds only, wear a full face shield and leather PPE, and never melt unknown or sealed scrap. Keep a fire extinguisher close. See our best gold melting furnace picks for furnace buyers.

Before You Strike an Arc

  • Check the mold is clean and completely dry, then preheat it gradually before the first pour.
  • Set the mold on a dry, level, heat-resistant surface and check the feet sit flat before you pour.
  • Coat the Tesllightt mold surface and seams with high-temperature lubricant, anti-seize paste or graphite coating before each use.
  • Keep the graphite molds in a cool, dry place between pours.
  • Wear suitable protective equipment, and remember the Nelyrho handle becomes hot during use.

FAQ for welders

What size steel ingot mold do I need for gold?

Match the mold to the melt. The Bonbo holds up to 25 troy ounces of gold, the Nelyrho up to 50 troy ounces, the Camoo about 100 ounces of metal, and each haizusai graphite mold casts about 1 kg of gold. The Tesllightt states a 2 L capacity with an approximate capacity of 34.6 kg of gold.

Are cast iron ingot molds good for copper?

Yes, for the metals the listings state. The Nelyrho and Bonbo cast iron molds both list copper among the metals they cast, along with gold, silver, aluminum and brass. The steel and graphite molds here list copper too.

Do I need to preheat an ingot mold?

The makers here say yes. The Nelyrho must be gradually preheated before first use to remove residual moisture, and the Tesllightt should be preheated before molten metal goes in. Both makers stress that the mold must be completely dry first.

How do I get the ingot out of the mold?

It depends on the mold. The Nelyrho and Bonbo use tapered walls: wait for cooling, then invert the mold and the bar drops out. The Tesllightt should come out after the metal has solidified and gained basic strength, not after full cooling. The graphite molds release on their own: tap the mold and the ingot comes free.

What is the difference between a steel ingot mold and a graphite ingot mold?

Steel and cast iron molds here are single heavy molds with tapered walls, and the Tesllightt states 5 mm steel with a heat-resistant coating. The graphite set is four small molds, each casting about 1 kg of gold, rated to 2000C with a self-lubricating surface that needs no release agent. None of the five listings here state stainless steel or ceramic.

Related: best gold melting furnace, electric vs propane melting furnace, best sand for sand casting, sand casting vs investment casting, graphite vs silicon carbide crucible, and the steel ingot molds hub. Also see our metal casting hub.

Scoring, line by line

Each mold is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No safety standard is stated for these molds, so every mold here scores zero on that criterion.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Nelyrho 50 oz Cast Iron 9.7 29 21 21 n/a 3
Tesllightt 8×8 Steel 9.7 30 22 21 n/a 0
Haizusai 1 kg Graphite 4-Pack 9.6 28 21 21 n/a 0
Bonbo 25 oz Cast Iron 9.5 26 19 20 n/a 0
Camoo 100 oz Cast Steel 9.4 24 19 19 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides