Best Belt Sander Under 150 (2026): 5 Picks Compared
Five belt sanders under 150 compared by motor amps, belt size, speed control, dust collection and warranty, for the home and farm shop.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallMetabo HPT SB8V29.6/10View on Amazon - 2
Best LightweightWEN 63219.5/10View on Amazon - 3
Best Bench ModeJellas 7Amp Sander (BS02)9.5/10View on Amazon - 4
Best MiniBlissthrill Mini Belt Sander9.4/10View on Amazon
A worn edge on a knife or a rough weld bead both call for the same tool, and the best belt sander under 150 is the one that fits the job on the bench. The comparison covers motor amps, belt size, speed control, dust collection and warranty, using only what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Metabo HPT SB8V2: 9 amp motor, variable speed and a 5 year limited warranty Check price on Amazon
- Best Lightweight WEN 6321: 7 amp sander at 6.2 pounds with a 2 year warranty Check price on Amazon
- Best Bench Mode Jellas 7Amp Sander (BS02): 7 amp sander with 2 C clamps, 10 belts and a vacuum adapter Check price on Amazon
- Best Mini Blissthrill Mini Belt Sander: Mini sander with 7 speeds, 30 belts and 20 sanding discs Check price on Amazon
The machines

Metabo HPT Belt Sander | 3 x 21 Inch
A 9 amp 3 by 21 inch belt sander with variable speed, a 1,020 watt motor and a 5 year limited warranty.
Pros
- 9 amp 1,020 watt motor for tough sanding jobs
- Variable speed dial at the base of the handle
- Clear front cover improves visibility against a surface
- 5 year limited warranty with a dust bag included
Cons
- 9.5 pounds of weight to carry through long sanding sessions
- A single sanding belt is included
- No C clamps are included for bench use
- No vacuum adapter is included

WEN 6321 7-Amp 3 in. x 21 in. Corded Belt Sander
A 7 amp 3 by 21 inch belt sander that weighs 6.2 pounds, with a detachable dust bag and a 2 year warranty.
Pros
- 7 amp motor rotates the belt at over 13 feet per second
- 6.2 pounds, lighter than the other 3 by 21 inch sanders here
- Detachable dust bag minimizes clean-up
- Lock-in safety feature allows continuous sanding without holding the trigger
Cons
- Single speed only, with no variable speed dial
- No vacuum adapter is included
- No C clamps are included for bench use
- 2 year warranty is shorter than the 5 year term on the Metabo

Jellas 7Amp Handheld Belt Sander
A 7 amp 3 by 21 inch belt sander with variable speed, 2 C clamps for bench use and 10 sanding belts in the box.
Pros
- Variable speed knob with 6 dials, 120-400 rpm
- 2 metal C clamps turn it into a bench sander
- 10 sanding belts from 40 to 180 grit in the box
- 2 in 1 vacuum adapter fits 35mm and 32mm hoses
Cons
- No warranty term is stated
- No vacuum cleaner in the box, only the adapter
- Bench use needs the sander flipped over and clamped to a table
- Belt changes need the belt arrow matched to the machine arrow

Jellas 7Amp Handheld Belt Sander
A 7 amp 3 by 21 inch belt sander with variable speed, 2 C clamps for bench use and 10 sanding belts, backed by 2 year customer support.
Pros
- Variable speed knob with 6 dials, 120-400 rpm
- 2 metal C clamps turn it into a bench sander
- 10 sanding belts from 40 to 180 grit in the box
- Dust bag has exhaust holes to keep dust out of the motor
Cons
- Slowest speed is 120 rpm, with no slower setting
- Bench use needs the sander flipped over and clamped to a table
- Belt changes need the belt arrow matched to the machine arrow
- No vacuum adapter is included

Mini Belt Sander with Upgraded 775 Motor
A mini belt sander with a 775 motor, 7 speeds from 4000 to 9000 RPM, 30 belts and 20 sanding discs for knife sharpening and small work.
Pros
- 7 speeds from 4000 to 9000 RPM with forward and reverse
- 30 belts and 20 sanding disc papers in the box
- 304 stainless steel build at 3.8 pounds
- Grinding wheel, polishing wheel and polishing wax included
Cons
- Small 330 by 30 mm belts suit knives and small parts, not wide boards
- No warranty term is stated
- Needs the power adapter seated firmly or it will not run
- Compact size leaves little room for large workpieces
Spec sheet comparison
| Sander | Gear Score | Motor | Belt | Speed | Weight | Warranty |
|---|---|---|---|---|---|---|
| Metabo HPT SB8V2 | 9.6/10 | 9 amp, 1,020 watts | 3 x 21 in | Variable | 9.5 lb | 5 year limited |
| WEN 6321 | 9.5/10 | 7 amp | 3 x 21 in | Single speed | 6.2 lb | 2 year |
| Jellas 7Amp Sander (BS02) | 9.5/10 | 7 amp, 120V | 3 x 21 in | 120-400 rpm | Not stated | Not stated |
| Jellas 7Amp Sander (BS02-SD) | 9.5/10 | 7 amp | 3 x 21 in | 120-400 rpm | Not stated | 2 year support |
| Blissthrill Mini Belt Sander | 9.4/10 | 775 motor | 330 x 30 mm belts | 4000-9000 RPM | 3.8 lb | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 21 November 2026. Where a listing states a figure two ways, the table shows both.
Buying guide: the best belt sander under 150 for the shop
Motor amps and belt size
Four of these sanders use a 3 by 21 inch belt: the WEN at 7 amps, the Metabo at 9 amps and both Jellas at 7 amps. The Metabo lists 1,020 watts beside its 9 amp motor. The Blissthrill is a mini sander with 330 by 30 mm belts, so it suits knives and small parts rather than wide boards.
Variable speed and bench mode
The Metabo and both Jellas list variable speed. The Jellas pair adds a knob with 6 dials from 120-400 rpm, and 2 metal C clamps turn either Jellas into a bench sander. The WEN runs at a single speed, and the Blissthrill offers 7 speeds from 4000 to 9000 RPM with forward and reverse.
Dust collection
Every full-size sander here ships with a detachable dust bag. The Jellas BS02 adds a 2 in 1 vacuum adapter for 35mm and 32mm hoses, and the twin Jellas bag has exhaust holes to keep dust out of the motor. The Blissthrill lists no dust collection.
Warranty and safety listings
Two listings state a warranty: the WEN at 2 years and the Metabo at 5 years. One Jellas lists 2 year customer support, and the other Jellas and the Blissthrill state no warranty term. No listing here states an electrical safety listing, so check for a mark on the unit when it arrives.
Sanding safety. Belt sanders throw dust and can grab loose clothing and gloves. Wear eye and face protection, clamp the work, keep guards in place, and never wear gloves near the moving belt. Work outdoors or with strong ventilation when sanding, and keep a fire extinguisher nearby. See the OSHA machine guarding page and the Safety Disclaimer.
Before You Strike an Arc
- Check the outlet: the Jellas lists a 120V motor and a 10 foot cord, so confirm the circuit before ordering.
- Count the belts in the box: the Jellas pair includes 10 belts from 40 to 180 grit, and the Blissthrill includes 30 belts and 20 sanding discs.
- Check the Blissthrill size on arrival: the maker gives 6.5 by 3.8 by 4.3 inches in the description and larger figures in the table.
- Fit the C clamps before first use if you plan to run a Jellas as a bench sander.
FAQ for welders
Which belt sander here has the strongest motor?
The Metabo lists a 9 amp 1,020 watt motor, above the 7 amp motors on the WEN and both Jellas sanders. The Blissthrill lists a 775 motor with speeds from 4000 to 9000 RPM, which is a different class of machine.
Can these sanders work as bench sanders?
Both Jellas sanders include 2 metal C clamps and can be turned over and fixed to a table as a bench sander, with a lock-on button to free your hand. The WEN, Metabo and Blissthrill have no C clamps in the box for bench mounting.
What belt sizes do these sanders take?
Four sanders take a 3 by 21 inch belt: the WEN, the Metabo and both Jellas. The Blissthrill takes 330 by 30 mm belts, with 30 belts and 20 sanding discs in the box.
Do any of these sanders state a warranty?
The WEN states a 2 year warranty and the Metabo states a 5 year limited warranty. One Jellas lists 2 year customer support, and the other Jellas and the Blissthrill state no warranty term.
Related: best belt sander for full-size picks, best 1×30 belt sander for knife making, and the metal fab tools hub.
Scoring, line by line
The Gear Score weighs performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing. No listing here states an electrical safety listing, so no safety points were given. Two listings state a warranty: the WEN at 2 years and the Metabo at 5 years, and one Jellas lists 2 year customer support.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Metabo HPT SB8V2 | 9.6 | 32 | 22 | 21 | 0 | 4 |
| WEN 6321 | 9.5 | 29 | 20 | 21 | 0 | 3 |
| Jellas 7Amp Sander (BS02) | 9.5 | 30 | 21 | 21 | 0 | 0 |
| Jellas 7Amp Sander (BS02-SD) | 9.5 | 29 | 20 | 20 | 0 | 1 |
| Blissthrill Mini Belt Sander | 9.4 | 26 | 19 | 20 | 0 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.




