Best 32 TPI Hacksaw Blade (2026)
Five 32 TPI hacksaw blades compared on length, thickness, construction and pack size, with a Gear Score for each.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallHAUTMEC HT00189.7/10View on Amazon - 2
Best Brand PickStarrett KBS1232-29.5/10View on Amazon - 3
Best 10-PackJUGREAT 32T 10-Pack9.5/10View on Amazon - 4
Best for Hard MetalsHanpex 32 TPI 10-Pack9.5/10View on Amazon - 5
Best JuniorBahco 228-32-10P9.4/10View on Amazon
A cutoff wheel is fast, but some jobs need a handsaw: trimming a bolt in place, cutting pipe without sparks, notching a bracket where the grinder cannot reach. For thin stock, a fine-tooth blade tracks straighter and leaves a cleaner edge, and a fresh blade cuts faster than a dull one. This guide to the best 32 tpi hacksaw blade compares the picks below on what each listing states: length, thickness, construction, tooth count and pack size.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall HAUTMEC HT0018: Bi-metal HSS teeth on spring steel, 12 x 1/2 x 0.025 in, with a storage case. Check price on Amazon
- Best Brand Pick Starrett KBS1232-2: Starrett SafeFlex bi-metal, 12 x 1/2 x 0.024 in, in a 2-pack. Check price on Amazon
- Best 10-Pack JUGREAT 32T 10-Pack: Bi-metal 10-pack; title and bullets disagree on length. Check price on Amazon
- Best for Hard Metals Hanpex 32 TPI 10-Pack: Bi-metal HSS for hardened steel, rebar and unistrut. Check price on Amazon
- Best Junior Bahco 228-32-10P: 150 mm carbon steel junior blades for small hacksaws. Check price on Amazon
The machines

HAUTMEC Bi-Metal Hacksaw Blades 12 inch
Bi-metal 32 TPI blades, 12 inch by 1/2 inch by 0.025 inch, with high-speed steel teeth and a storage case.
Pros
- High-speed steel teeth on spring steel back, electron-beam welded
- Wavy-set teeth for smooth cuts with less vibration
- White anti-rust coating for corrosion resistance
- Storage case included for 10 blades
Cons
- No warranty term is stated
- No safety certification is stated
- Manufacturer listed as SUOBO TOOLS, not HAUTMEC

Starrett Hacksaw Blade, 12" Length, 1/2" Width
Bi-metal 32 TPI blades, 12 inch by 1/2 inch by 0.024 inch, SafeFlex design in a 2-pack.
Pros
- Bi-metal SafeFlex: hardened edge with flexible back
- 0.024 in thickness stated, the thinnest here
- Suited for interrupted cuts and bending stresses per the listing
- For mild steel, copper, brass and aluminium
Cons
- 2-pack only, fewer blades than the 10-packs
- No warranty term is stated

JUGREAT 10" Hacksaw Blades Replacement Bi-Metal
Bi-metal 32 TPI blades in a 10-pack, with high-speed steel teeth; the title and bullets disagree on length.
Pros
- Bi-metal with high-speed steel teeth, D6A M2
- Spring steel body for flexibility
- 10-pack for shop use
- Lists wood, PVC, copper, iron pipe and stainless
Cons
- Title says 10 in length, bullets say 12 in
- No warranty term is stated
- No storage case stated

Hanpex Hacksaw Replacement Blades (10 Pack)
Bi-metal 32 TPI blades, 12 inch, with high-speed steel wavy-set teeth in a 10-pack.
Pros
- Bi-metal high-speed steel teeth, wavy set
- Lists hardened steel, rebar, black pipe and unistrut
- 10-pack
- 0.2 kg stated weight
Cons
- 15X longer life and 3X sharper are unverified marketing claims
- No thickness stated
- No warranty term is stated
- Thinner spec detail than the HAUTMEC

Bahco 228-32-10P Junior Hacksaw Blade, 32TPI
Carbon steel 32 TPI junior blades, 150 mm, in a pack of 10 for junior hacksaws.
Pros
- 150 mm junior size for small hacksaws
- Pack of 10
- Carbon steel
- 32 g stated weight
Cons
- Junior size only, not for full-size frames
- Carbon steel, not bi-metal
- No warranty term is stated
Other welders and gear to compare
Starrett Hacksaw BladeCheck price on Amazon
Starrett Redstripe Power Hacksaw BladeCheck price on Amazon
Bahco 3906-300-14-5P Hacksaw BladeCheck price on Amazon
DEWALT Portable Band Saw BladeCheck price on Amazon
Morse Master Cobalt Bi-Metal Portable Band Saw Blade 44 7/8 xCheck price on Amazon
Spec sheet comparison
| Blade | Gear Score | Length | Thickness | Construction | Pack | Warranty |
|---|---|---|---|---|---|---|
| HAUTMEC HT0018 | 9.7/10 | 12 in | 0.025 in | Bi-metal HSS | 10 | Not stated |
| Starrett KBS1232-2 | 9.5/10 | 12 in | 0.024 in | Bi-metal SafeFlex | 2 | Not stated |
| JUGREAT 32T 10-Pack | 9.5/10 | 10 in / 12 in | 0.025 in | Bi-metal HSS | 10 | Not stated |
| Hanpex 32 TPI 10-Pack | 9.5/10 | 12 in | Not stated | Bi-metal HSS | 10 | Not stated |
| Bahco 228-32-10P | 9.4/10 | 150 mm | Not stated | Carbon steel | 10 | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 22 October 2026.
Buying guide: best 32 tpi hacksaw blade
Bi-metal vs carbon steel
Four blades here are bi-metal: high-speed steel teeth joined to a flexible spring steel back. The Bahco is carbon steel. The HAUTMEC listing describes its electron-beam welded teeth as staying sharper longer than conventional carbon steel, and adds a white anti-rust coating for indoor and outdoor use. The Starrett listing describes its SafeFlex design as a hardened edge with a flexible back for interrupted cuts. For a blade that takes bending without snapping, the listings point to bi-metal.
Length: full-size vs junior
Three listings state a clear 12 inch length: HAUTMEC, Starrett and Hanpex, the standard size for full-size hacksaw frames. The JUGREAT title says 10 inch while its bullets say 12 inch, so confirm before ordering. The Bahco is a 150 mm junior blade for small junior hacksaws, not full-size frames; check the frame’s stated size before buying.
Thickness
Stated thicknesses are 0.024 inch (Starrett) and 0.025 inch (HAUTMEC and JUGREAT bullets). The Hanpex states no thickness, and the Bahco spec table’s 15 centimeters cannot describe a blade. Where a title and spec table disagree, the title and bullets win.
Tooth count
Every listing here states 32 TPI and 32 teeth. The HAUTMEC listing calls 32 TPI the smoother, cleaner option against 18 and 24 TPI, and pairs it with stainless steel, conduit, copper pipe and threaded rod.
Pack size
Four listings sell 10-packs; the Starrett sells a 2-pack. The HAUTMEC adds a plastic storage case for its ten blades. A bigger pack suits a busy shop; a 2-pack suits occasional use.
Use as directed. Blades are sharp; wear gloves when swapping them and keep fingers clear of the teeth. Tension the blade per the frame maker’s instructions, since an over-tensioned blade can snap. Keep cutoffs and used blades where they cannot cut someone reaching into a drawer.
Before You Strike an Arc
- Check blade length against the frame: 12 inch for full-size, 150 mm for junior.
- The JUGREAT length conflicts between title and bullets; confirm before ordering.
- Store spare blades flat or in a case like the HAUTMEC’s so the teeth stay sharp.
FAQ for welders
How do I choose a hacksaw blade?
Match the TPI to the stock and the length to the frame. The listings here pair 32 TPI with thin metals: copper tube, conduit, threaded rod and sheet metal. Check whether the listing states bi-metal or carbon steel, confirm the length, and look for a stated thickness. A 10-pack suits a busy shop; a 2-pack suits occasional use.
What size hacksaw blade do I need?
Measure the frame. Full-size frames take 12 inch blades; junior hacksaws take 150 mm blades like the Bahco. The JUGREAT listing conflicts on length, so confirm before buying.
What hacksaw blade cuts metal?
A bi-metal 32 TPI blade suits thin metals. The HAUTMEC lists stainless steel, conduit, copper pipe and aluminum; the Hanpex lists hardened steel, rebar, black pipe and unistrut; the Starrett lists mild steel, copper, brass and aluminium. The JUGREAT adds wood and PVC to its list.
How do I set a hacksaw blade in the frame?
Follow the frame maker’s instructions for tension and direction. The blade listings here do not state mounting steps.
Related: best hacksaw blades, best hacksaw blade for stainless steel, best hacksaw blade for aluminum, hacksaw vs angle grinder for metal and the metal fab tools hub.
Scoring, line by line
Each blade is scored on performance (tooth count, construction, stated dimensions), build (materials, coating, case), value (blades per pack and spec detail), safety and warranty. No listing here states a safety certification or a warranty term, so every blade scores zero on those two; the ranking comes from the other three.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| HAUTMEC HT0018 | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Starrett KBS1232-2 | 9.5 | 29 | 21 | 18 | n/a | 0 |
| JUGREAT 32T 10-Pack | 9.5 | 28 | 19 | 20 | n/a | 0 |
| Hanpex 32 TPI 10-Pack | 9.5 | 28 | 19 | 19 | n/a | 0 |
| Bahco 228-32-10P | 9.4 | 26 | 18 | 19 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




