Types of Hacksaw Blades: Teeth, Materials and Uses
Hacksaw blades differ by teeth per inch, steel type, and length, and matching them to the material decides how clean and fast the cut comes out.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
LENOX Tools Hacksaw Blade, 10-inch, 18 TPI9.6/10View on Amazon - 2
Hanpex 6in. Pro Bi-Metal HSS Mini Hacksaw9.6/10View on Amazon - 3
AUUTI 20 Pack12 Inch High Speed 24 TPI Hacksaw9.6/10View on Amazon
A hacksaw blade is a strip of teeth, and the type matters more than the frame: tooth count, tooth material, and blade length decide what the blade cuts and how clean the cut comes out. Types of hacksaw blades break down by teeth per inch, by high-carbon steel versus bi-metal construction, and by length, and this guide explains each type and where it suits the work.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | LENOX Tools Hacksaw Blade, 10-inch, 18 TPI | 9.6/10 | Buy on Amazon |
| 2 | Hanpex 6in. Pro Bi-Metal HSS Mini Hacksaw | 9.6/10 | Buy on Amazon |
| 3 | AUUTI 20 Pack12 Inch High Speed 24 TPI Hacksaw | 9.6/10 | Buy on Amazon |

LENOX Tools Hacksaw Blade, 10-inch, 18 TPI
A 10-inch bi-metal blade at 18 TPI for general metal cutting in a standard hacksaw frame, sold as a 2-pack.
Pros
- Bi-metal construction bends and flexes without breaking
- Shatter resistant design suits shop use
- Maker claims up to 100% longer blade life than the prior generation
- 18 TPI suits thicker material
Cons
- Only 2 blades in the pack, so spares run out sooner
- 10-inch length needs a full size frame; it will not fit a mini frame
- 18 TPI is coarse for thin sheet and fine work
- Shatter resistant does not mean unbreakable; the blade can still snap under misuse

Hanpex 6in. Pro Bi-Metal HSS Mini Hacksaw
A 6-inch bi-metal HSS mini blade at 24 TPI for hard to reach spots, sold as a 10-pack.
Pros
- Bi-metal HSS construction with tempered steel for wear resistance
- 24 TPI gives a fine finish cut
- Pin ended blades fit most mini hacksaw frames
- Cuts PVC, wood, aluminum, copper, and brass
Cons
- 6-inch length suits small cuts only; it will not reach across wide stock
- Fine 24 TPI teeth cut slowly in thick metal
- Pin ended blades need a mini frame, not a standard frame
- No warranty term is stated

AUUTI 20 Pack12 Inch High Speed 24 TPI Hacksaw
A 12-inch high-carbon steel blade at 24 TPI with wavy teeth, sold as a 20-pack.
Pros
- 20-pack gives plenty of spares for a busy shop
- Wavy tooth design with increased tooth hardness
- High-carbon steel with flexibility and wear resistance
- Cuts steel, piping, wood, and angles
Cons
- Fine 24 TPI teeth cut slowly in thick metal
- 12-inch length needs a full size frame
- High-carbon steel without a bi-metal back
- No warranty term is stated
The types of hacksaw blades by teeth per inch
Teeth per inch, written as TPI, is the tooth count along an inch of blade. A 24 TPI blade has fine teeth that take small bites, which suits thin material and leaves a fine finish. Hanpex and AUUTI list 24 TPI blades. An 18 TPI blade has coarser teeth that clear chips faster, which suits thicker material and general shop cutting. LENOX lists an 18 TPI blade. Fine teeth on thick stock cut slowly and clog; coarse teeth on thin sheet catch and chatter. Match the tooth count to the material, not to the frame.
High-carbon steel versus bi-metal
AUUTI blades (on Amazon) are high-carbon steel with wavy teeth, listed as flexible, wear resistant, and durable, with increased tooth hardness for cutting performance. Bi-metal blades pair a hard tooth edge with a flexible back. Hanpex lists bi-metal HSS blades in tempered steel, and LENOX lists shatter resistant bi-metal construction that bends and flexes without breaking.
Blade length and frames
Length decides which frame the blade fits and how far it reaches. Hanpex blades are 6 inches long with pin ends, made for most mini hacksaw frames and for cutting in hard to reach spots. LENOX blades are 10 inches long, and AUUTI blades are 12 inches long, and each fits a standard full size frame. A short blade suits PVC, plastic tubing, copper, and brass in tight quarters. A full size blade suits longer cuts in steel, piping, and angles. Check the frame before ordering: pin ended mini blades do not fit a standard frame, and standard blades do not fit a mini frame. For longer stock, see the best extra long hacksaw blades guide.
Side by side
| Blade | Gear Score | Length | TPI | Material | Pack |
|---|---|---|---|---|---|
| Lenox 10-Inch 18 TPI | 9.6/10 | 10 in | 18 | Bi-metal | 2 |
| Hanpex 6-Inch Mini | 9.6/10 | 6 in | 24 | Bi-metal HSS | 10 |
| AUUTI 12-Inch 24 TPI | 9.6/10 | 12 in | 24 | High-carbon steel | 20 |
Scores come from the gear section below.
Types of hacksaw blades in the shop
The blades below show each type in the shop: a standard bi-metal blade for general cutting, a short bi-metal mini blade for tight spots, and a long high-carbon blade for a big pack of spares.
Blade safety. A hacksaw blade under tension can snap, and the teeth are sharp even when the blade is dull. Clamp the work so it cannot move, wear safety glasses, and keep hands clear of the cut line. Let the blade do the work: forcing it bends teeth, snaps blades, and makes the cut wander. When a blade snaps, stop and fit a fresh blade.
FAQ for welders
How many teeth per inch do I need?
Match TPI to the material. A 24 TPI blade, such as the Hanpex and AUUTI blades here, suits thin material and leaves a fine finish. An 18 TPI blade, such as the LENOX blade here, suits thicker material and general shop cutting.
What is the difference between bi-metal and high-carbon steel blades?
Bi-metal blades pair a hard tooth edge with a flexible back, so they bend and flex without breaking. LENOX lists shatter resistant bi-metal construction, and Hanpex lists bi-metal HSS in tempered steel. AUUTI blades are high-carbon steel with wavy teeth, listed as flexible, wear resistant, and durable.
What length hacksaw blade do I need?
It depends on the frame and the cut. Hanpex blades are 6 inches long with pin ends for most mini hacksaw frames and hard to reach spots. LENOX blades are 10 inches long and AUUTI blades are 12 inches long, and each fits a standard full size frame. Measure the frame before ordering.
How long does a hacksaw blade last?
It depends on the material, the pressure, and the tooth count. LENOX claims its blade design delivers up to 100% longer blade life versus the prior generation. Replace a blade when the teeth dull or the blade snaps.
Can a hacksaw cut steel?
Yes, with the right blade. AUUTI lists steel wire and piping among the uses for its 12-inch blade, and LENOX lists a shatter resistant bi-metal blade at 18 TPI. Use a coarser tooth count for thicker steel and clamp the work.
Related: best hacksaw blades, best hacksaw blade for aluminum, best hacksaw for cutting steel, and the metal fab tools hub. Also see best band saw blade for metal.




