Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Hacksaw Blade for Aluminum (2026)

Three hacksaw blades for aluminum compared by tooth count, length, material and pack size, from high carbon steel to bi-metal.

Best Hacksaw Blade for Aluminum (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1STANLEY 15-904ABest OverallSTANLEY 15-904A9.6/10View on Amazon
  2. 2HAUTMEC Bi-MetalBest Bi-MetalHAUTMEC Bi-Metal9.5/10View on Amazon
  3. 3OX Hacksaw BladesBest 6-InchOX Hacksaw Blades9.5/10View on Amazon

The aluminum angle is marked, the vise is holding it square, and the old blade in the hacksaw skates instead of biting. Aluminum cuts fast with the right tooth, and it gums up and grabs with the wrong one. The best hacksaw blade for aluminum is the one whose tooth count, length and material match the stock on the bench. Three blades below, from high carbon steel to bi-metal, scored on what their listings actually state.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall STANLEY 15-904A: 24T high carbon steel, names aluminum, limited lifetime warranty Check price on Amazon
  • Best Bi-Metal HAUTMEC Bi-Metal: HSS teeth, 24 TPI, 10-pack with storage case Check price on Amazon
  • Best 6-Inch OX Hacksaw Blades: 24 TPI, flexible back, 10-pack, names aluminum Check price on Amazon

The machines

STANLEY 10 in. 24T High Carbon Steel Hacksaw Blade

STANLEY 10 in. 24T High Carbon Steel Hacksaw Blade

STANLEY9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 inch 24T high carbon steel hacksaw blade in a 2-pack that names aluminum, with a limited lifetime warranty.

Pros

  • Names aluminum in compatible materials
  • 24T high carbon steel, 10 inch length
  • 2-pack for a spare on hand
  • Limited lifetime warranty stated

Cons

  • No safety standard is stated
  • 10 inch only, needs a full-size frame
  • Carbon steel dulls faster than bi-metal
  • No storage case stated
HAUTMEC Bi-Metal Hacksaw Blades 10 inch

HAUTMEC Bi-Metal Hacksaw Blades 10 inch

HAUTMEC9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 inch 24 TPI bi-metal hacksaw blade 10-pack with high-speed steel teeth, a storage case, and aluminum in its cutting list.

Pros

  • Bi-metal: HSS teeth on spring steel back
  • 24 TPI, names aluminum
  • 10-pack with a plastic storage case
  • White anti-rust coating

Cons

  • Title says 10-pack, bullets describe 12
  • No warranty term is stated
  • No safety standard is stated
  • 0.12 kg listed as item weight, unclear per blade
OX Hacksaw Blades – Hacksaw Blades with Adjustable

OX Hacksaw Blades – Hacksaw Blades with Adjustable

OX9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 inch 24 TPI carbon steel hacksaw blade 10-pack with a flexible back, naming aluminum, copper, iron and plastic.

Pros

  • 24 TPI, names aluminum
  • 10-pack for long cutting sessions
  • Flexible back resists snapping
  • High-speed tooth strip stated

Cons

  • 6 inch needs a junior or short frame
  • Warranty type has no term
  • No safety standard is stated
  • Multicolour finish, not a spec

Other welders and gear to compare

Spec sheet comparison

Blade Gear Score Length Teeth Material Pack Warranty
STANLEY 15-904A 9.6/10 10 in 24T High carbon steel 2 Limited lifetime
HAUTMEC Bi-Metal 9.5/10 10 in 24 TPI Bi-metal HSS/spring steel 10 Not stated
OX Hacksaw Blades 9.5/10 6 in 24 TPI Carbon steel 10 Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 22 October 2026. “Not stated” means the listing does not give the figure. Tooth counts are per inch where the listing states TPI.

Buying guide: best hacksaw blade for aluminum

Tooth count and TPI

All three state 24 teeth per inch: the OX, the Stanley 15-904A and the HAUTMEC. The HAUTMEC listing mentions 18, 24 and 32 TPI options, but the blade sold here is the 24 TPI variant. For hacksaw blade tpi for aluminium, 24 TPI is the common ground across these listings: fine enough for thin-wall tube, coarse enough to clear chips in solid bar.

What 24 TPI does on aluminum

Three blades here share 24 teeth per inch, and the listings describe what that buys. The OX listing pairs its 24 TPI with a high-speed tooth strip on a flexible back, claiming greater resistance to tooth stripping and longer blade life. The Stanley 15-904A listing says its 24T design gives smooth, controlled cutting for workshop and maintenance work. The HAUTMEC listing describes precision-ground wavy-set teeth that cut smoothly with less vibration and fewer burrs.

Blade length and frame fit

Length decides which frame the blade fits. The Stanley 15-904A and the HAUTMEC are 10 inches, and the OX is 6 inches. The Stanley listing says the blade fits a standard or compatible hacksaw frame; the HAUTMEC is a standard 10 inch by 1/2 inch by 0.025 inch replacement blade for most full-size frames. The HAUTMEC listing names its users: professional contractors, maintenance technicians, mechanics, electricians, plumbers and HVAC installers. The OX listing pitches both professional and DIY work. A 6 inch blade needs a junior or short frame, so check the frame before ordering the OX. Measure the old blade or the frame, not the packaging.

Blade material

The three blades cover three materials. The Stanley 15-904A is high carbon steel, the everyday choice. The HAUTMEC is bi-metal: hardened high-speed steel teeth electron-beam welded to a flexible spring steel back, which the listing says outlasts conventional carbon steel. The OX is carbon steel with a high-speed tooth strip on a flexible back. For aluminum specifically, three listings name it: the OX, the Stanley 15-904A and the HAUTMEC.

Bi-metal versus carbon steel

Two blades here are carbon steel and one is bi-metal, and the listings draw the line between them. The HAUTMEC listing says its hardened high-speed steel teeth, electron-beam welded to a flexible spring steel back, stay sharper longer and significantly outlast conventional carbon steel blades. The Stanley 15-904A listing claims dependable cutting strength for everyday metal cutting from its high carbon steel. The OX pairs carbon steel with a high-speed tooth strip on a flexible back. Bi-metal costs more per blade and earns it back in edge life; carbon steel is the consumable you replace without thinking. For occasional aluminum cuts, carbon steel is enough. For daily fab work, the bi-metal listing makes its own case.

Coatings and storage

Only the HAUTMEC states a coating: a white anti-rust layer for indoor and outdoor use, on top of a flexible spring steel back that resists snapping under tension. The HAUTMEC is also the only blade here that ships in a plastic storage case, which matters when the alternative is loose blades in a drawer. The Stanley listing states no coating and no case, and the OX listing states neither. A blade that rusts between jobs cuts worse next time, so the coating and the case are real value, not decoration. If the blades live in a damp shop, the coated blade in a case has the edge.

Pack size and value

Pack sizes run from a 2-pack to a 10-pack. The Stanley 15-904A is a 2-pack, and the OX and HAUTMEC are 10-packs. The HAUTMEC title says 10-pack and the spec table agrees on 10 count, but the bullets describe a 12-pack with 4 of each TPI; the title and table win, so read it as 10. The HAUTMEC includes a plastic storage case and the OX ships 10 blades in one pack. The Stanley 15-904A listing says its two blades reduce downtime, and the OX listing notes its blades are easily replaceable. More blades per pack means fewer reorders, but only if the blade is the right one for the job.

Before You Strike an Arc

  • Frame fit: 10 inch and 6 inch blades need different frames. Confirm the frame size before ordering.
  • Tooth direction: toothed blades cut on the push stroke, so mount the teeth facing forward.
  • Pack count: the HAUTMEC title and spec table say 10, the bullets say 12. Count the blades on arrival.
  • Warranty: only the Stanley listing states a limited lifetime warranty. Keep the packaging until the term is confirmed.

FAQ for welders

What is hacksaw blade TPI?

TPI is teeth per inch. Three blades here state 24 TPI: the OX, the Stanley 15-904A and the HAUTMEC.

Which of these blades name aluminum as a material?

The OX lists aluminum among its surface recommendations, the Stanley 15-904A lists aluminum in its compatible materials, and the HAUTMEC names aluminum in its cutting list.

How many blades come in each pack?

The Stanley 15-904A is a 2-pack, and the OX is a 10-pack. The HAUTMEC title and spec table say 10-pack, though its bullets describe 12; trust the title and table.

Do any of these blades state a warranty?

The Stanley listing states a limited lifetime warranty. The OX states a limited warranty with no term, and the HAUTMEC states no warranty, so both score zero for warranty.

How do you fit a hacksaw blade?

The listings give no fitting instructions. The Stanley listing states the blade fits a standard or compatible hacksaw frame, and the HAUTMEC is a standard 10 inch replacement for most full-size frames. Match the blade length to the frame, pins to holes.

Scoring, line by line

Each blade is scored on performance, build, value, safety and warranty, using only what the listing publishes. The weights are on our How We Pick page. No listing here states a safety standard, so all three score 0 for safety. Only the Stanley listing states a warranty term.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
STANLEY 15-904A 9.6 30 20 21 0 4
HAUTMEC Bi-Metal 9.5 32 21 21 0 0
OX Hacksaw Blades 9.5 30 20 21 0 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

More welding guides

See every metal fab tool guide. Also see our best hacksaw blades. Also see our best hacksaw blade for stainless steel. Also see our best jigsaw blade for aluminum. Also see our TIG vs stick for aluminum. Also see our best TIG cup for aluminum. Also see our best rivet gun for aluminum rivets.

More buying guides

Metal Fab Tools ·

Hacksaw Blade Sizes Explained

Hacksaw blade sizes are length, width, thickness and teeth per inch, and the packs here cover 10 and 12 inch blades in 18, 24…