Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Tig Cup for Aluminum: 5 Torch Cups, Scored

Five TIG cups for aluminum torch setups, compared on cup size, material, torch fit, pack count and the warranty each listing states.

Best Tig Cup for Aluminum: 5 Torch Cups, Scored
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1RIVERWELD 53N61S Gas LensBest Gas Lens PickRIVERWELD 53N61S Gas Lens9.7/10View on Amazon
  2. 2RIVERWELD 13N09 #5Best Standard CupRIVERWELD 13N09 #59.6/10View on Amazon
  3. 3Alffun 53-Piece KitBest Kit ValueAlffun 53-Piece Kit9.6/10View on Amazon
  4. 4TIANLYLIN #4-#12 GlassClearest ViewTIANLYLIN #4-#12 Glass9.6/10View on Amazon

Aluminum forgives nothing. The puddle oxidizes the moment the gas blanket breaks, and a cup that is the wrong size for the joint leaves a dull, gray bead that has to be ground out and re-welded. This guide covers the best tig cup for aluminum across five common torch setups: a standard ceramic cup, a gas lens cup, a glass cup set, a bulk kit and a wide single cup, each scored on what its listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Gas Lens Pick RIVERWELD 53N61S Gas Lens: Gas lens cups with a 1/2 inch mouth, sold as a 10-pack for 9 and 20 series torches. Check price on Amazon
  • Best Standard Cup RIVERWELD 13N09 #5: Standard #5 alumina cup, 5/16 inch with an 8.0 mm orifice, a 10-pack. Check price on Amazon
  • Best Kit Value Alffun 53-Piece Kit: 53 pieces: cups, collet bodies, collets, back caps and a gasket, for 9, 20 and 25 series. Check price on Amazon
  • Clearest View TIANLYLIN #4-#12 Glass: Glass cups from #4 to #12 in one set, so the puddle stays visible through the cup wall. Check price on Amazon

The machines

RIVERWELD TIG Gas Lens Alumina Nozzle 53N61S 8#

RIVERWELD TIG Gas Lens Alumina Nozzle 53N61S 8#

RIVERWELD9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A gas lens alumina cup in #8 (1/2 inch) size, sold as a 10-pack, that fits 9 and 20 series torches with a 45V41 to 45V45 gas lens collet body.

Pros

  • Gas lens cup with a #8 (1/2 inch, 12.5 mm) mouth for wide gas coverage
  • Fits 9 series air cooled and 20 series water cooled torches per the bullets
  • Works with 45V41 to 45V45 gas lens collet bodies
  • 10-pack gives spares for steady shop use

Cons

  • Title claims 9 17 18 20 25 26 fit, but the bullets name only 9 and 20 series torches
  • Only one cup size, #8, with no smaller or larger option
  • No warranty term stated in the listing
RIVERWELD TIG Alumina Nozzle Ceramic Cups 13N09 5#

RIVERWELD TIG Alumina Nozzle Ceramic Cups 13N09 5#

RIVERWELD9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A standard alumina #5 cup, 5/16 inch with an 8.0 mm orifice, sold as a 10-pack for 9 and 20 series torches.

Pros

  • States the cup size two ways: #5, 5/16 inch, 8.0 mm
  • Alumina ceramic, the standard cup material
  • Lists the collet body it works with: 13N
  • 10-pack, the same pack size as the gas lens pick

Cons

  • Title claims 9 17 18 20 25 26 fit, bullets name only 9 and 20 series torches
  • Only the #5 size in the pack, no size range
  • No warranty term stated in the listing
53pcs TIG Collets Bodies Alumina Cup Assorted Size

53pcs TIG Collets Bodies Alumina Cup Assorted Size

Alffun9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 53-piece kit with 16 alumina cups, 16 collet bodies, 16 collets, 4 back caps and a cup gasket for 9, 20 and 25 series torches.

Pros

  • 53 pieces: the biggest count here by far
  • Cups plus collet bodies, collets, back caps and a gasket in one kit
  • Fits 9, 20 and 25 series torches per the listing
  • 16 cups, spares for a long stretch of work

Cons

  • Cup sizes in the assortment are not stated
  • Material stated only as Ceramic, with no grade
  • Bullets promise fine workmanship, a claim with no stated spec behind it
  • No warranty term stated in the listing
14 PCS TIG Welding #4 - #12 Glass Cup Consumables

14 PCS TIG Welding #4 - #12 Glass Cup Consumables

TIANLYLIN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 14-piece set of glass TIG cups from #4 to #12 for WP-9/17/18/20/25/26 torches, with a stated caution on CK torches.

Pros

  • Glass cups let the welder see the puddle through the cup wall
  • 14 pieces covering #4 to #12, the widest size range here
  • Fits WP-9/17/18/20/25/26 torches per the title
  • Easy to install and replace per the listing

Cons

  • Bullets warn the set may not fit a CK torch
  • Material stated only as Glass, with no grade or heat rating
  • No warranty term stated in the listing
#12 Ceramic (Twin Pack) White TIG Welding Cup

#12 Ceramic (Twin Pack) White TIG Welding Cup

Vaphy9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Two #12 ceramic TIG cups that fit DB SR WP 9/20/25 and WP 17 18 26 torches, with 3/32 diffusers.

Pros

  • #12 is the largest cup number in this guide
  • Fits DB SR WP 9/20/25 and WP 17 18 26 torches per the bullets
  • Comes with 3/32 diffusers
  • Twin pack gives a spare cup on the bench

Cons

  • Only 2 cups, the smallest count here
  • No cup mouth size or length stated beyond the #12 number
  • Material stated only as Ceramic, with no grade
  • No warranty term stated in the listing

Other welders and gear to compare

Spec sheet comparison

Model Cup Size Material Fits Torch Pack
RIVERWELD 53N61S Gas Lens #8 (1/2 in) Ceramic alumina oxide 9 and 20 series 10-pack
RIVERWELD 13N09 #5 #5 (5/16 in) Ceramic alumina oxide 9 series, 20 series 10-pack
Alffun 53-Piece Kit Assorted Ceramic 9, 20 and 25 series 53 pieces
TIANLYLIN #4-#12 Glass #4 to #12 Glass WP-9/17/18/20/25/26 14 pieces
Vaphy #12 Twin Pack #12 Ceramic 9/20/25, 17, 18, 26 2-pack

Ratings in this table are the makers’ own claims taken from each product page (22 October 2026).

How to choose the best tig cup for aluminum

Cup size

Cup numbers in this guide run from #4 to #12, with the RIVERWELD standard cup at #5 (5/16 inch, 8.0 mm), the gas lens cup at #8 (1/2 inch, 12.5 mm) and the Vaphy twin pack at #12. A wider cup covers more of the joint with gas, which aluminum likes, but it also needs more clearance around the work. The TIANLYLIN glass set spans #4 to #12 in one order, so a welder who has not settled on a size can work through the range before committing to a 10-pack of one number.

Gas lens or standard

The RIVERWELD 53N61S is a gas lens cup and works with 45V41 to 45V45 gas lens collet bodies, while the RIVERWELD 13N09 is a standard cup that works with 13N collet bodies. The gas lens cup costs a slot in this ranking on coverage and fit detail, not on a stated flow number, because no listing here states one. Check which collet body is already in the torch before buying: the two RIVERWELD cups take different bodies and are not interchangeable.

Glass or ceramic

Ceramic alumina oxide is the standard cup material in this guide, used by both RIVERWELD cups, the Alffun kit and the Vaphy twin pack. The TIANLYLIN set is the only glass option, and its one real advantage is visibility: the welder can watch the puddle edge through the cup wall instead of lifting the cup to check. The listing warns the glass set may not fit a CK torch, so confirm that fit before ordering.

Fit the torch

Torch fit is where both RIVERWELD listings get slippery. The titles claim PTA SR DB WP 9 17 18 20 25 26 torches, but the bullets on both narrow that to 9 series air cooled and 20 series water cooled torches, naming Lincoln, Miller and Weldcraft models. Trust the bullets. The Vaphy twin pack states fit for DB SR WP 9/20/25 and WP 17 18 26 torches, the TIANLYLIN glass set for WP-9/17/18/20/25/26, and the Alffun kit for 9, 20 and 25 series torches.

Pack count

The packs here run from a 2-piece twin pack to a 53-piece kit. The RIVERWELD cups come as 10-packs, which suits a shop that already knows its cup number. The TIANLYLIN set holds 14 pieces across the #4 to #12 range, and the Alffun kit bundles 53 pieces of cups, collet bodies, collets, back caps and a gasket. Match the count to the cups the shop actually wears through: a known number argues for the 10-pack, an unknown number for the set.

Before You Strike an Arc

  • Check the cup number against the collet body before threading it on: the 13N09 cups take a 13N collet body, and the 53N61S cups take a 45V41 to 45V45 gas lens collet body.
  • Match the torch series to the bullets, not just the title: both RIVERWELD listings name narrower torch ranges in the bullets than in the titles.
  • Confirm a CK torch fit before ordering the glass cups: the TIANLYLIN bullets warn they may not fit.
  • Inspect each cup on arrival for chips or cracks at the mouth before welding with it.
  • Keep a spare cup on the bench: the packs here run from a 2-piece twin pack to a 53-piece kit, so count on wearing through the known sizes first.

[wgl_safety kind=”generic”]

FAQ for welders

What size TIG cup should I use for aluminum?

The cups in this guide run from #4 to #12. The RIVERWELD standard cup is a #5 (5/16 inch, 8.0 mm) and the gas lens cup is a #8 (1/2 inch, 12.5 mm), both common choices for aluminum joints. A wider cup covers more of the joint with gas, but it needs more clearance around the work. A welder who has not settled on a size can start with the TIANLYLIN #4 to #12 glass set and then buy a 10-pack of the number that fits.

Do gas lens cups work on aluminum?

The RIVERWELD 53N61S in this guide is a gas lens cup and the listing states it works with 45V41 to 45V45 gas lens collet bodies. It fits 9 series air cooled and 20 series water cooled torches per the bullets. No listing here states a flow number, so the ranking scores the gas lens cup on its stated size, fit and pack, not on a claimed flow improvement.

Glass cups or ceramic cups for TIG on aluminum?

Ceramic alumina oxide is the standard cup material in this guide. The TIANLYLIN set is the only glass option, and its stated draw is visibility: the welder can watch the puddle edge through the cup wall. The one stated limitation is fit: the bullets warn the glass set may not fit a CK torch.

Will these cups fit a 17 series torch?

Some of them. The TIANLYLIN glass set lists WP-9/17/18/20/25/26 torches and the Vaphy twin pack lists WP 17 18 26 torches. The two RIVERWELD cups claim 9 17 18 20 25 26 in their titles but name only 9 and 20 series torches in the bullets, so plan on 9 and 20 series for those. The Alffun kit states fit for 9, 20 and 25 series torches.

How many cups come in a pack?

The Vaphy twin pack holds 2 pieces, the two RIVERWELD cups come as 10-packs, the TIANLYLIN glass set holds 14 pieces from #4 to #12, and the Alffun kit bundles 53 pieces of cups, collet bodies, collets, back caps and a gasket. The TIANLYLIN and Alffun listings state their package counts as one package containing the full set or kit.

Related: TIG vs Stick for Aluminum, best TIG gas lens kit for aluminum, Pyrex cup vs ceramic TIG cup, gas lens vs standard TIG collet body, best shielding gas for TIG welding, argon vs helium for TIG welding and AC TIG vs DC TIG welder.

Scoring, line by line

Each cup is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No listing here states a safety certification or a warranty term, so every cup scores zero on those two criteria and the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
RIVERWELD 53N61S Gas Lens 9.7 32 21 21 n/a 0
RIVERWELD 13N09 #5 9.6 30 21 21 n/a 0
Alffun 53-Piece Kit 9.6 28 19 24 n/a 0
TIANLYLIN #4-#12 Glass 9.6 28 19 22 n/a 0
Vaphy #12 Twin Pack 9.5 27 19 19 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides