Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

TIG Welding Cup Sizes: Chart for Gas Lens and Standard Cups

TIG cup sizes run from small standard cups to wide gas lens cups, and the right size depends on the torch, the collet body and the orifice the job needs.

TIG Welding Cup Sizes: Chart for Gas Lens and Standard Cups
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1RIVERWELD TIG Gas Lens Alumina Nozzle 57N 53N 6#RIVERWELD TIG Gas Lens Alumina Nozzle 57N 53N 6#9.6/10View on Amazon
  2. 2RIVERWELD TIG Gas Lens Alumina Nozzles 54N14 8#RIVERWELD TIG Gas Lens Alumina Nozzles 54N14 8#9.6/10View on Amazon
  3. 3Vaphy #12 Ceramic (4-Pack) White TIG Welding CupVaphy #12 Ceramic (4-Pack) White TIG Welding Cup9.5/10View on Amazon

A TIG bead that comes out gray often points at the cup before it points at the welder. The cup shapes the gas envelope around the puddle, and the wrong size leaves the edges of the bead open to air while the middle still looks fine. This guide covers tig welding cup sizes, what the number on a cup means, and how to match a cup to a torch and a collet body.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

RIVERWELD TIG Gas Lens Alumina Nozzle 57N 53N 6#

RIVERWELD TIG Gas Lens Alumina Nozzle 57N 53N 6#

RIVERWELD9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-piece set of large alumina cups in #6, #8, #10, #12 and #15 for large gas lens collet bodies on WP-9, WP-17, WP-18, WP-20, WP-25 and WP-26 torches.

Pros

  • Cups in #6, #8, #10, #12 and #15, with orifices from 3/8 inch to 15/16 inch
  • 3 cups each of #10 and #12, the middle sizes of the range
  • Names the large gas lens collet bodies it fits: 45V0204, 45V116, 45V64 and 995795
  • Alumina ceramic cups in a 10-piece set

Cons

  • No warranty term is stated
  • 1 cup each of #6 and #8, so the small sizes run out first
  • 2 cups of #15 only
  • Needs large gas lens collet bodies, not standard collet bodies
RIVERWELD TIG Gas Lens Alumina Nozzles 54N14 8#

RIVERWELD TIG Gas Lens Alumina Nozzles 54N14 8#

RIVERWELD9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-piece pack of #8 ceramic gas lens cups with a 1/2 inch orifice for WP-17, WP-18 and WP-26 torches.

Pros

  • 10 cups of one size, so spares stay on hand for #8 work
  • #8 orifice at 1/2 inch, 12.5mm, with a 1-11/16 inch cup length
  • Lists regular gas lens collet bodies from 45V24 to 45V29 and a 10N collet
  • Lists fit for WP-17, WP-18 and WP-26 torches from Lincoln, Miller, ESAB, Weldcraft, CK and Everlast

Cons

  • One size only, #8, so no range for wider or narrower work
  • No warranty term is stated
  • No collet body in the pack, cups only
  • No diffuser is named in the listing
Vaphy #12 Ceramic (4-Pack) White TIG Welding Cup

Vaphy #12 Ceramic (4-Pack) White TIG Welding Cup

Vaphy9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-pack of #12 white ceramic cups with 3/32 diffusers for WP-9, WP-20, WP-25, WP-17, WP-18 and WP-26 torches.

Pros

  • #12 cup, near the wide end of the range in this guide
  • 4 cups in the pack, with 3/32 diffusers included
  • Lists fit for DB SR WP-9, WP-20 and WP-25 and for WP-17, WP-18 and WP-26
  • White ceramic cups, a plain single-size pack

Cons

  • No dimensions, weight or warranty stated
  • One size only, #12
  • Short listing with no orifice detail beyond the #12 size
  • 4 cups only, so spares run out fast

TIG Welding Cup Sizes: What the Number Means

The number on a TIG cup names its orifice, and the listings in this guide show the pattern plainly. A #6 cup carries a 3/8 inch orifice, a #8 cup carries a 1/2 inch orifice, a #10 cup carries a 5/8 inch orifice, a #12 cup carries a 3/4 inch orifice, and a #15 cup carries a 15/16 inch orifice, listed as 24.0mm. A larger number means a wider orifice and a wider gas envelope around the puddle.

Cup size Orifice
#6 3/8 in
#8 1/2 in, 12.5mm
#10 5/8 in
#12 3/4 in
#15 15/16 in, 24.0mm

A #8 cup lists a 1/2 inch orifice in each RIVERWELD listing here.

Gas Lens Cups and Standard Cups

Gas lens cups sit on a gas lens collet body, and the listings name the collet bodies they fit. The RIVERWELD jumbo cups work with large gas lens collet bodies, while the RIVERWELD 54N14 cups (on Amazon) work with regular gas lens collet bodies and a 10N collet. See the gas lens vs standard TIG collet body comparison for how the collet body styles differ. Check the collet body listing before ordering cups alone.

The Cups and Kits in This Guide

Every cup below handles one part of the same job: matching cup size, collet body and torch so the gas envelope covers the puddle.

Cup Sizes Side by Side

Gear Score Cup sizes Torch fit
RIVERWELD Jumbo Gas Lens Cups 9.6/10 #6, #8, #10, #12, #15 WP-9, WP-17, WP-18, WP-20, WP-25, WP-26
RIVERWELD 54N14 #8 Cups 9.6/10 #8 WP-17, WP-18, WP-26
Vaphy #12 Ceramic 4-Pack 9.5/10 #12 WP-9, WP-20, WP-25, WP-17, WP-18, WP-26

The table lines up cup sizes and torch fit beside each card score.

How to Pick a Cup Size

Pick the cup by torch, collet body and orifice, in that order.

  • Match the torch series. Cups in this guide list fit for WP-17, WP-18 and WP-26 torches, and the RIVERWELD jumbo set also lists WP-9, WP-20 and WP-25. A cup that lists the torch series still needs the right collet body behind it.
  • Match the collet body. Large gas lens cups need large gas lens collet bodies, and the 54N14 cups list regular gas lens collet bodies from 45V24 to 45V29 with a 10N collet. A #12 cup appears in the Vaphy 4-pack (on Amazon) and in gas lens kits alike, so the number alone never settles the fit.
  • Start from the middle of the range. A #10 cup at 5/8 inch sits in the middle of the range in this guide, and a #12 cup at 3/4 inch covers wider work. Move up or down the chart when the joint calls for more or less coverage.
  • Check the diffuser. The Vaphy #12 cups come with 3/32 diffusers, and the listing names them as part of the pack. A diffuser fits a gas lens collet body, so a standard cup needs none.
  • Keep spares of the size in use. The RIVERWELD packs hold 10 cups of one size or across a range, while a 4-pack covers fewer spares, so count the cups on hand first.

When a listing leaves a spec blank, treat it as not stated rather than guessing. The Vaphy listing, for example, states no dimensions, weight or warranty.

FAQ for welders

What does the number on a TIG cup mean?

The number names the cup orifice. In the listings in this guide, #6 means a 3/8 inch orifice, #8 means a 1/2 inch orifice, #10 means a 5/8 inch orifice, #12 means a 3/4 inch orifice, and #15 means a 15/16 inch orifice, listed as 24.0mm. A larger number means a wider orifice.

What cup size fits a WP-17 torch?

Cups in this guide list fit for WP-17, WP-18 and WP-26 torches, and the RIVERWELD jumbo set also lists WP-9, WP-20 and WP-25. The cup size itself is a separate choice from the torch series: any of the sizes in the chart can fit a WP-17 torch when the collet body matches. Check the collet body listing before ordering.

Do gas lens cups and standard cups use the same sizes?

Yes, the same numbers appear on both. A #12 cup appears in the Vaphy 4-pack and in gas lens kits alike. What differs is the collet body behind the cup: large gas lens cups need large gas lens collet bodies, while the 54N14 cups list regular gas lens collet bodies from 45V24 to 45V29 with a 10N collet.

What is a #12 TIG cup used for?

A #12 cup carries a 3/4 inch orifice, near the wide end of the range in this guide. The Vaphy #12 4-pack carries white ceramic #12 cups with 3/32 diffusers, and the RIVERWELD jumbo set also carries #12 cups. A wider cup spreads the gas envelope over a wider bead.

How many cups come in a pack?

The packs in this guide run from a 4-pack of Vaphy #12 cups to 10-piece RIVERWELD packs. The jumbo RIVERWELD set holds 10 cups across #6, #8, #10, #12 and #15, with 3 cups each of #10 and #12, 1 cup each of #6 and #8, and 2 cups of #15. Count the cups per size before ordering.

Related: parts of a TIG torch, gas lens vs standard TIG collet body, TIG torch sizes explained, and the welding consumables hub. Also see the best TIG cup for aluminum and best TIG gas lens kit roundups.

More buying guides