Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

TIG Welding Wire Sizes: Diameters Chart (2026)

TIG filler rods in these listings share a 1.6 mm diameter, so rod length, pack size and metal type decide which rod fits the weld.

TIG Welding Wire Sizes: Diameters Chart (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ER70S-6, 1/16" x 20" Mild Steel TIG Welding WireER70S-6, 1/16" x 20" Mild Steel TIG Welding Wire9.6/10View on Amazon
  2. 2TOOLIOM ER70S-6 Copper-Coated Mild Steel TIGTOOLIOM ER70S-6 Copper-Coated Mild Steel TIG9.6/10View on Amazon
  3. 330 Pcs Stainless Steel TIG Welding Rod ER308L30 Pcs Stainless Steel TIG Welding Rod ER308L9.5/10View on Amazon

A thin sheet edge waits on the bench, the joint is small, and the rod in hand decides how much metal goes into the puddle. TIG welding wire sizes start with the diameter, and every rod in this guide lists the same diameter: 1.6 mm. Length, pack size and metal type are what differ, so match those to the job.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

ER70S-6, 1/16" x 20" Mild Steel TIG Welding Wire

ER70S-6, 1/16" x 20" Mild Steel TIG Welding Wire

Ottoeight9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

100 sticks of ER70S-6 rod at 1.6 mm in diameter and 20 inches long, 4 inches longer than the common 16-inch rod, for mild steel fabrication and repair.

Pros

  • 100 sticks in a single pack for long fabrication work
  • 20-inch rods, 4 inches longer than common 16-inch rods
  • Manganese and silicon deoxidizers for smooth bead appearance
  • Suits sheet metal, tubing, frames and tanks

Cons

  • Single diameter: 1.6 mm
  • No shielding gas is stated
  • No warranty term is stated
  • 20-inch rods need storage that fits the length
TOOLIOM ER70S-6 Copper-Coated Mild Steel TIG

TOOLIOM ER70S-6 Copper-Coated Mild Steel TIG

TOOLIOM9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

5 pounds of copper-coated ER70S-6 rod at 1.6 mm in diameter and 16 inches long in a plastic case, for mild and low-alloy steel.

Pros

  • Copper coating resists rust
  • Listed uses cover vehicles, shipbuilding, bridges and machine engineering
  • 5 pounds packed in a plastic case
  • Suits high welding currents with a stable arc

Cons

  • 16-inch rods, shorter than the 20-inch Ottoeight rods
  • No warranty term is stated
  • 5-pound pack suits small jobs rather than long fabrication runs
  • Mild and low-alloy steel only, so no stainless work
30 Pcs Stainless Steel TIG Welding Rod ER308L

30 Pcs Stainless Steel TIG Welding Rod ER308L

FUYITE9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

30 pieces of ER308L stainless steel rod at 1.6 mm in diameter and 16 inches long, with low splatter and corrosion resistance.

Pros

  • ER308L stainless steel, the only stainless rod here
  • Low splatter with clean weld seams stated
  • Corrosion and high-temperature resistance stated
  • Even heating to prevent warping stated

Cons

  • 30 pieces only, so a big job needs another pack
  • No shielding gas is stated
  • 16-inch rods, shorter than the 20-inch Ottoeight rods
  • Stainless only, so no mild steel work

The size in a paragraph

TIG welding wire sizes start with the diameter, and every rod in this guide lists the same diameter: 1.6 mm. The diameter decides how much filler metal each dip adds to the puddle, while the length decides how long one rod lasts in hand and the pack decides how much rod you have on hand. The TOOLIOM and Ottoeight rods (on Amazon) are ER70S-6 for mild steel, and the FUYITE rod (on Amazon) is ER308L for stainless steel.

Side by side

Rod Gear Score Diameter Length Pack
Ottoeight ER70S-6 100-Pack 9.6/10 1.6 mm 20 inches (508 mm) 100 sticks
TOOLIOM ER70S-6 5LB 9.6/10 1.6 mm 16 inches (406.4 mm) 5 pounds
FUYITE ER308L 30-Pack 9.5/10 1.6 mm 16 inches 30 pieces

Every rod here lists the same 1.6 mm diameter, so the choice comes down to length, pack and metal. The Ottoeight rod is the only 20-inch rod here, and the FUYITE rod is the only stainless rod here.

How to pick from these TIG welding wire sizes

Start with the metal: ER70S-6 for mild steel and compatible low-alloy steel, ER308L for stainless steel. Then look at length: 16 inches on the TOOLIOM and FUYITE rods, 20 inches on the Ottoeight rod, which the maker states is 4 inches longer than common 16-inch rods. Then look at the pack: 5 pounds, 30 pieces or 100 sticks. See our aluminum MIG wire vs TIG rod comparison for the other side of the wire choice.

Which rod for which metal

The TOOLIOM and Ottoeight rods are ER70S-6, listed for mild steel and compatible low-alloy steel, with vehicles, shipbuilding, bridges, automotive work and machine engineering among the uses the TOOLIOM listing names. The FUYITE rod is ER308L stainless steel, with corrosion and high-temperature resistance stated. Match the rod to the metal being welded, and check the marking on the rod before striking an arc. See our argon vs helium for TIG welding guide for the gas side of the setup.

The rods

The rods below cover the sizes these listings state: the same diameter in every rod, lengths of 16 inches and 20 inches, and a choice of mild steel or stainless steel.

What gas the listings state

Only the TOOLIOM listing states a shielding gas, and it names Ar and CO2 mixed gas or 100% CO2. That is a MIG gas mix, not a TIG gas: TIG runs on inert gas, so check the gas the machine’s manual calls for before welding. The FUYITE and Ottoeight listings state no shielding gas.

For more options, see our welding consumables guides.

FAQ for welders

What diameter TIG rod do these listings use?

Every rod here lists the same diameter: 1.6 mm. The TOOLIOM and Ottoeight rods are ER70S-6, and the FUYITE rod is ER308L stainless.

What length TIG rod fits the job?

Lengths here are 16 inches on the TOOLIOM and FUYITE rods and 20 inches on the Ottoeight rods. The 20-inch rod gives 4 more inches of working material per rod, so fewer rod changes on long joints.

What gas do these TIG rods need?

Only the TOOLIOM listing states a shielding gas, and it names Ar and CO2 mixed gas or 100% CO2. That is a MIG gas mix, not a TIG gas: TIG runs on inert gas, so check the gas the machine’s manual calls for before welding. The FUYITE and Ottoeight listings state no shielding gas.

Does ER70S-6 rod work on stainless steel?

The ER70S-6 rods here are listed for mild steel and compatible low-alloy steel. For stainless, the FUYITE ER308L rod is the stainless rod in this guide.

How many rods come in a pack?

The TOOLIOM pack is 5 pounds of rod, the FUYITE pack is 30 pieces, and the Ottoeight pack is 100 sticks. The TOOLIOM pack is sold by weight and the other two by count, so compare the pack against the amount of welding the job needs.

Related: flux core welding wire sizes, best shielding gas for TIG welding, best wire brush for welding, and how do you TIG weld aluminum. Also see our what is pulse TIG welding.

More buying guides