MIG Wire Spool Sizes: Weights and Diameters
MIG wire spool sizes cover wire diameter, spool weight and reel size, and this guide explains each one from real listings so you can match a spool to your welder.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
YESWELDER MIG Welding Wire9.2/10View on Amazon - 2
Blue Demon ER70S6 X .030 X 11 LB MIG/GMAW Carbon Steel9.7/10View on Amazon
A spool of MIG wire looks simple until it does not fit the machine. The wire feeds from a reel inside the welder, and the reel has a size, the wire has a diameter, and the spool has a weight, and each of them has to match what the machine takes. This guide explains mig wire spool sizes in plain terms: what the diameter means, what the spool weight means, and how the reel size decides whether the spool fits.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Mig wire spool sizes at a glance
Spool size is not one figure. It is the wire diameter, the spool weight and the reel size together, and a spool that gets any of them wrong will not run right in the machine. The listings in this guide give these figures: PGN lists an ER70S-6 solid wire at .035 inch on a 10 lb spool, YESWELDER lists an ER308L stainless wire at .030 inch on a 2 lb spool, and Blue Demon lists an ER70S6 carbon steel wire at .030 inch on an 11 lb spool. The mig wire spool sizes in this guide come from those listings, and the spool holders listed alongside them fit 1KG and 5KG reels. Read the diameter, the weight and the reel size before ordering, and check each against the machine.
Side by side
| PGN ER70S-6 | YESWELDER ER308L | Blue Demon ER70S6 | |
|---|---|---|---|
| Wire diameter | .035 inch | .030 inch | .030 inch |
| Spool weight | 10 lb | 2 lb | 11 lb |
| Wire type | Solid MIG wire | Stainless steel solid wire | Carbon steel wire |
| Shielding gas | Not stated | Argon or Argon/Helium blends | CO2 and/or CO2 mix |
| Weld positions | Not stated | All positions | All position |
Figures are manufacturer stated for the example models, collected 15 November 2026.
Wire diameters: .030 inch and .035 inch
The diameter is the thickness of the wire itself, and it is the figure the drive rolls and the contact tip have to match. The listings here show .030 inch wire in the YESWELDER ER308L stainless wire (on Amazon) and the Blue Demon ER70S6 carbon steel wire, and .035 inch wire in the PGN ER70S-6 solid wire. The YESWELDER listing also gives the diameter as 0.8mm alongside .030 inch. A spool in the wrong diameter will not feed cleanly, so check the diameter on the listing against what the machine takes before ordering.
Spool weights: 2 lb, 10 lb and 11 lb
Spool weight is the weight of the wire on the spool, and it decides how often the spool needs changing. The YESWELDER ER308L spool weighs 2 lb, the PGN ER70S-6 spool weighs 10 lb, and the Blue Demon ER70S6 (on Amazon) spool weighs 11 lb. A heavier spool holds more wire and needs changing less often, but it also needs a machine that takes the reel size that spool comes on, so weight alone never decides the buy. The spool weight is printed on the listing, and the listings here state it plainly for each wire.
Reel sizes: 1KG and 5KG
Reel size is the physical size of the spool, and it is what decides whether the spool fits the machine at all. The spool holders in the listings fit 1KG and 5KG reels, and they state the sizes plainly: a 1KG reel with a 100mm diameter and a 15mm center hole, and a 5KG reel with a 200mm diameter and a 50mm center hole when matched with a reverse disc adapter. The holders suit most small and medium MIG welders, and they are built from ABS plastic. The Novabright holder (on Amazon) has an adjustable flange that holds the spool steady while it feeds. The HOgardenME holder base (on Amazon) fixes with 4x 5mm holes, with the fixing bolts not included. Measure the reel and the center hole before ordering, and match them to the holder and the machine.
How to match a spool to your welder
Match the spool in the order the machine cares about: diameter, reel size, then weight. Check the wire diameter the machine takes, and buy that diameter and nothing else. Check the reel size the machine takes, and make sure the spool and the holder fit it. Check the spool weight the machine can carry on its reel. Solid wire also needs shielding gas, so check the gas the wire calls for: the Blue Demon ER70S6 listing calls for CO2 and/or CO2 mix, and the YESWELDER ER308L listing names 100% Argon or Argon/Helium gas blends. Our best MIG welding wire guide scores spools for shop and field work, and our best MIG wire for auto body guide covers ER70S-6 spools for body panels. If the machine itself is the open question, see how to choose a MIG welder.
For more options, see our welding consumables guides.
FAQ for welders
What MIG wire spool sizes fit a home welder?
The spool holders in the listings fit 1KG and 5KG reels: a 1KG reel with a 100mm diameter and a 15mm center hole, and a 5KG reel with a 200mm diameter and a 50mm center hole when matched with a reverse disc adapter. Check the machine for the reel size it takes, and check the spool listing for the same figures, before ordering.
What is the difference between .030 inch and .035 inch MIG wire?
The difference is the diameter of the wire. The .035 inch wire is thicker than the .030 inch wire, and the listings here show .030 inch wire in the YESWELDER ER308L and Blue Demon ER70S6 spools and .035 inch wire in the PGN ER70S-6 spool. Buy the diameter the machine takes, since the drive rolls and the contact tip are set for that diameter.
How much wire is on a 10 lb spool?
A 10 lb spool holds 10 lb of wire. The PGN ER70S-6 spool in the listings weighs 10 lb, against 2 lb for the YESWELDER ER308L spool and 11 lb for the Blue Demon ER70S6 spool. Spool weight is the weight of the wire, so a heavier spool holds more wire and needs changing less often.
Do I need a spool holder for 1KG and 5KG reels?
A spool holder keeps the reel steady while the wire feeds, and the holders in the listings fit both 1KG and 5KG reels. They take a 100mm diameter reel with a 15mm center hole and a 200mm diameter reel with a 50mm center hole when matched with a reverse disc adapter. The holders are built from ABS plastic and suit most small and medium MIG welders.
What gas does solid MIG wire need?
Solid MIG wire needs shielding gas, and the gas depends on the wire. The Blue Demon ER70S6 listing calls for CO2 and/or CO2 mix, and the YESWELDER ER308L listing names 100% Argon or Argon/Helium gas blends. Check the wire listing for the gas it calls for, and match it to the cylinder and regulator on the machine.
Related: how to choose a MIG welder, best MIG welding wire, best MIG wire for auto body, and what is flux core wire.




