Welding Rod and Wire Size Conversion Chart
Stick electrodes and welding wire are sold in fractional inches, decimal inches or millimeters depending on the maker and the country. Type any diameter to convert it, or read the charts below.
Diameter converter
1 inch is exactly 25.4 mm. Metric electrodes and wire are sold in rounded sizes (2.4, 3.2, 0.9, 1.2 mm), so the nearest common size is shown as well.
Stick electrode sizes
The size of a stick electrode is the diameter of the metal core wire, not the flux coating.
| Stick electrode | Decimal (in) | Metric (mm) |
|---|---|---|
| 1/16 in | 0.0625 | 1.59 |
| 5/64 in | 0.0781 | 1.98 |
| 3/32 in | 0.0938 | 2.38 |
| 1/8 in | 0.1250 | 3.17 |
| 5/32 in | 0.1563 | 3.97 |
| 3/16 in | 0.1875 | 4.76 |
| 7/32 in | 0.2188 | 5.56 |
| 1/4 in | 0.2500 | 6.35 |
MIG and flux-core wire sizes
| MIG / flux-core wire | Decimal (in) | Metric (mm) |
|---|---|---|
| .023 in | 0.0230 | 0.58 |
| .024 in | 0.0240 | 0.61 |
| .030 in | 0.0300 | 0.76 |
| .035 in | 0.0350 | 0.89 |
| .040 in | 0.0400 | 1.02 |
| .045 in | 0.0450 | 1.14 |
| .052 in | 0.0520 | 1.32 |
| 1/16 in | 0.0625 | 1.59 |
How the conversion works
One inch is exactly 25.4 millimeters, so millimeters = inches × 25.4. A 1/8 in electrode is 0.125 × 25.4 = 3.18 mm, and a .035 in wire is 0.035 × 25.4 = 0.89 mm.
Metric packaging rounds these to trade sizes: a 1/8 in electrode is usually labeled 3.2 mm, a 3/32 in electrode 2.4 mm, and .035 in wire 0.9 mm. Some metric markets also stock true metric sizes such as 2.5 mm and 5.0 mm that sit between the inch sizes, so match the label on the box to what your drive rolls, contact tip or electrode holder are marked for.
