Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Tig Cup Size 4 vs 6: Which One Should You Buy?

Size 4 and size 6 TIG cups differ in bore and opening width, and the right one depends on the joint, the torch fit stated in the listing, and whether a kit covers both sizes.

Tig Cup Size 4 vs 6: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 153pcs TIG Collets Bodies Alumina Cup Assorted Size Fit SR WP53pcs TIG Collets Bodies Alumina Cup Assorted Size Fit SR WP9.6/10View on Amazon
  2. 214 PCS TIG Welding #414 PCS TIG Welding #49.6/10View on Amazon
  3. 3#12 Ceramic#12 Ceramic9.5/10View on Amazon
  4. 4Vaphy #12 CeramicVaphy #12 CeramicView on Amazon
  5. 5Vaphy #10 CeramicVaphy #10 CeramicView on Amazon

A tight joint on a small bracket, a bead along an open plate, and a torch that has to reach without crowding the work: the cup on the end of the torch shapes how much of the bead stays shielded and how close the torch can sit. For tig cup size 4 vs 6, the short answer is that size 4 suits tighter access and narrower beads, while size 6 is the wider opening for wider beads. The right pick depends on the joint, the torch, and whether the listing states the fit for that torch.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Tig Cup Size 4 vs 6: The Difference in Short

Cup size numbers track the bore at the mouth of the cup, and a larger number means a wider opening. In the RIVERWELD listing, size 4 is 1/4 inch and size 6 is 3/8 inch, so size 6 opens wider than size 4. The same listing pairs size 4 with D6.5*42mm and size 6 with D9.5*42mm, and states 1-11/16 inches of length for both sizes. A wider cup has a wider opening, while a narrower cup is the smaller opening of the pair.

Side by side

Size 4 cup Size 6 cup What it means on the bench
Bore stated 1/4 inch 3/8 inch Bore stated in the RIVERWELD listing for each size
RIVERWELD part number 54N18 54N16 Both sizes sit in the same 10-piece kit
Length stated 1-11/16 inches 1-11/16 inches Same length stated for both sizes in the RIVERWELD listing
Size token stated D6.5*42mm D9.5*42mm Size token stated in the RIVERWELD listing for each size
Gas lens fit stated 45V24-45V29 gas lens collet body 45V24-45V29 gas lens collet body Same gas lens collet body range stated for both
Opening Narrower opening Wider opening Size 6 opening is wider than size 4

One caution from the listings: the same size number does not fix every dimension. The RIVERWELD listing states 1-11/16 inches for its size 4 cup, while the GZTIGWELD listing states 1 inch for its size 4 cup, given as 1/4 inch x 1 inch and 6.5 x 25.5 mm. Bore matches across those two listings, length does not, so read the listing for the exact cup rather than assuming all size 4 cups share one shape.

When a Size 4 Cup Fits the Job

Size 4 fits work where access is tight and the bead is narrow. A small bracket, a close corner, or a joint with little room around it all suit the 1/4 inch opening.

  • Tight joints. The 1/4 inch opening is the narrower opening of the pair.
  • Single-size packs. The GZTIGWELD listing is a 10-pack of size 4 cups only, for readers who already know size 4 is the pick.
  • Kits that include size 4. The RIVERWELD kit includes size 4 as 54N18, alongside sizes 5, 6, 7 and 8.

When a Size 6 Cup Fits the Job

Size 6 fits work where the bead runs wider and a wider opening is wanted. An open plate, a longer straight run, or a joint with room around it all suit the 3/8 inch opening.

  • Wider beads. The 3/8 inch opening in the RIVERWELD listing is wider than the size 4 opening in the same listing.
  • Open work. Room around the joint gives the wider cup space to sit.
  • Kits that include size 6. The RIVERWELD kit includes size 6 as 54N16.

Gear That Covers Size 4, Size 6, or Both

The four listings below run in the order that fits this question most directly.

RIVERWELD TIG Gas Lens Ceramic Cups 54N series kit, 10 pieces. This kit holds sizes 4, 5, 6, 7 and 8, with size 4 as 54N18 and size 6 as 54N16. The listing states fit for SR WP 17, 18 and 26 TIG welding torches, work with 45V24-45V29 regular gas lens collet bodies and a 10N collet, and ceramic cups in pink. Mismatch inside the listing: the title names the 54N series, while the spec table lists PartNumber 53N87L, so check the part number on arrival against the listing for the kit ordered.

GZTIGWELD 53N58 size 4 alumina nozzle, 10-pack. This is a single-size pack of size 4 cups, stated as 1/4 inch x 1 inch and 6.5 x 25.5 mm, in ceramic. The listing states fit for SR WP 9 and 20 torches and for SR WP 17, 18 and 26 torches, use with a 45V regular gas lens collet body and a 13N collet for WP 9 and 20 torches, and use with a 17GL stubby gas lens and 10N stubby collets for WP 17, 18 and 26 torches.

Telooco TIG torch accessories kit, 36 pieces. This kit is titled as a #4 to #12 kit, with glass shield cups, electrode clips and rings, and fits WP-17, WP-18 and WP-26 torches. The listing states copper parts for electrical conduction, transparent shield cups that install by pushing, and suitability for carbon steel and some low-alloy steel TIG welding, including pipeline and various-position arc welding.

Vaphy number 12 ceramic cup, 4-pack. This pack holds number 12 cups only, in white ceramic, and states fit for DB SR WP 9, 20 and 25 torches and for WP 17, 18 and 26 torches, with 3/32 diffusers. Number 12 sits well above both size 4 and size 6. It suits a reader who wants a much wider cup.

How to Match a Cup to Your Torch

Size is only half the pick. A cup that does not fit the torch, the gas lens collet body, or the collet may not seat right, whatever its size number. Check these points in the listing before ordering:

  • Torch series. RIVERWELD and Telooco state WP 17, 18 and 26; GZTIGWELD and Vaphy also state WP 9 and 20, and Vaphy adds WP 25.
  • Gas lens collet body. RIVERWELD states 45V24-45V29 regular gas lens collet bodies; GZTIGWELD states a 45V regular gas lens collet body for WP 9 and 20 torches and a 17GL stubby gas lens for WP 17, 18 and 26 torches.
  • Collet. RIVERWELD states a 10N collet; GZTIGWELD states a 13N collet for WP 9 and 20 torches and 10N stubby collets for WP 17, 18 and 26 torches.
  • Material stated. RIVERWELD, GZTIGWELD and Vaphy state ceramic cups; Telooco states glass shield cups with copper parts.
  • Length stated. Length differs between listings at the same size number.

For the wider question of gas lens parts against standard collet bodies, see gas lens vs standard TIG collet body. Hot metal, arc light and fumes call for the usual shop care: a helmet and gloves, ventilation or outdoor air, and a clear area around hot work. No listing here states a safety certification.

FAQ for welders

What bore do size 4 and size 6 TIG cups have?

Size 4 is 1/4 inch and size 6 is 3/8 inch in the RIVERWELD listing, which also pairs size 4 with D6.5*42mm and size 6 with D9.5*42mm. Size 6 therefore opens wider than size 4. Check the listing for the exact cup, since length can differ between listings at the same size number.

Can one kit cover both size 4 and size 6?

Yes. The RIVERWELD 10-piece kit holds sizes 4, 5, 6, 7 and 8, with size 4 as 54N18 and size 6 as 54N16. The Telooco 36-piece kit title spans #4 to #12; check its listing for the exact sizes it holds.

Will these cups fit a WP 17, WP 18 or WP 26 torch?

All four listings state fit for WP 17, 18 and 26 torches, with GZTIGWELD and Vaphy also stating WP 9 and 20 torches. Match the gas lens collet body and collet stated in each listing too. RIVERWELD states a 10N collet, while GZTIGWELD states 10N stubby collets for WP 17, 18 and 26 torches.

Does a size 4 cup from one listing match another listing’s size 4 cup?

Not in every dimension. Both RIVERWELD and GZTIGWELD state a 1/4 inch bore for size 4, but RIVERWELD states 1-11/16 inches of length while GZTIGWELD states 1 inch, given as 6.5 x 25.5 mm. Compare bore and stated length together.

Is a number 12 cup a substitute for size 6?

No. The Vaphy pack holds number 12 cups only, which sit well above size 6, and the listing states no size 4 or size 6 cup. A number 12 cup suits a reader who wants a much wider cup, Pick a listing that states size 4 or size 6 instead.

Related: best TIG cup for aluminum, best TIG gas lens kit, welding consumables hub.

More buying guides