TIG Aluminum Filler Rod Chart: Sizes and Alloys
A TIG aluminum filler rod chart matches ER4043 and ER5356 rods to the base metal. Sizes, alloys, shielding gas, and the three rods here compared.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
MorningRo ER5356 3/32" x 39" 10 LB Aluminum Tig9.6/10View on Amazon - 2
ER4043 Aluminum TIG Welding Wire Filler Rod9.6/10View on Amazon - 3
TOOLIOM ER4043 Aluminum TIG Welding Rod9.6/10View on Amazon
The aluminum is clean, the TIG torch is set, and the bead needs filler rod. A TIG aluminum filler rod chart matches the rod alloy and size to the base metal, and the three rods here cover the two alloys in this guide: ER4043 for general aluminum and ER5356 for aluminum-magnesium alloys and marine work. This guide explains the chart, the alloys, and which rod fits which job.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | MorningRo ER5356 3/32" x 39" 10 LB Aluminum Tig | 9.6/10 | Buy on Amazon |
| 2 | ER4043 Aluminum TIG Welding Wire Filler Rod | 9.6/10 | Buy on Amazon |
| 3 | TOOLIOM ER4043 Aluminum TIG Welding Rod | 9.6/10 | Buy on Amazon |

MorningRo ER5356 3/32" x 39" 10 LB Aluminum Tig
A 10 lb pack of 3/32 by 39 in ER5356 rods with 4.5 to 5.5% magnesium, made for corrosion resistance in saltwater and marine work.
Pros
- 4.5 to 5.5% magnesium for corrosion resistance
- 39 in rods suit continuous seams
- 10 lb pack for medium to large tasks
- Suits aluminum-magnesium, aluminum-magnesium-zinc and aluminum-silicon-magnesium alloys
Cons
- No stated warranty term
- 39 in length suits long seams more than short repairs
- 10 lb pack is a lot for a small job
- Needs dry, sealed storage for unused wire

ER4043 Aluminum TIG Welding Wire Filler Rod
100 sticks of 3/32 by 16 in ER4043 rod with about 5% silicon, for fabrication, sheet metal work and general aluminum repair.
Pros
- 100 sticks in the pack
- About 5% silicon for a fluid pool and smooth beads
- Suits 3003, 3004, 5052, 6061 and 6063 plus selected cast alloys
- Low spatter and reduced cracking stated
Cons
- No stated warranty term
- 16 in rods are short for long seams
- Needs a clean surface, free of oil, dirt and oxide
- Cast alloy coverage is limited to selected alloys

TOOLIOM ER4043 Aluminum TIG Welding Rod
A 5 lb pack of 3/32 by 16 in ER4043 rods with 5% silicon, in a plastic case, for aluminum repair and fabrication.
Pros
- 5% silicon for a fluid weld pool
- Suits 3003, 3004, 5052, 6061, 6063 and cast alloys such as 214
- Argon, helium or argon/helium mixtures as shielding gas
- 5 lb pack in a plastic case
Cons
- No stated warranty term
- 16 in rods are short for long seams
- 5 lb pack is smaller than the 10 lb ER5356 pack
- Cast coverage is limited to the named cast alloys
TIG aluminum filler rod chart in one paragraph
The chart has two alloys. ER4043 carries 5% silicon, which keeps the weld pool fluid and holds down cracking, and it suits 3003, 3004, 5052, 6061 and 6063, plus cast alloys such as 214. ER5356 carries 4.5 to 5.5% magnesium, which gives corrosion resistance in saltwater, and it suits aluminum-magnesium, aluminum-magnesium-zinc and aluminum-silicon-magnesium alloys. All three rods here are 3/32 in diameter, in 16 in and 39 in lengths, so the choice is the alloy first and the length second.
TIG aluminum filler rods for the chart
The three rods here put the chart into practice: two ER4043 rods for general aluminum and one ER5356 rod for aluminum-magnesium alloys and saltwater work.
Side by side
| TOOLIOM ER4043 | MorningRo ER5356 | Ottoeight ER4043 | What changes | |
|---|---|---|---|---|
| Alloy | ER4043, 5% silicon | ER5356, 4.5-5.5% magnesium | ER4043, about 5% silicon | Match the alloy to the base metal |
| Rod size | 3/32 x 16 in | 3/32 x 39 in | 3/32 x 16 in | Longer rods suit long seams |
| Pack | 5 lb in a plastic case | 10 lb pack | 100 sticks | Bigger pack suits bigger jobs |
| Shielding gas | Argon, helium or mixes | 100% argon | 100% argon | Argon covers all three |
| Base alloys | 3003, 3004, 5052, 6061, 6063, cast 355, 356, 214 | Aluminum-magnesium, aluminum-magnesium-zinc, aluminum-silicon-magnesium | 3003, 3004, 5052, 6061, 6063, selected cast | Check the alloy list first |
| Best use | Repair and fabrication | Marine and pressure vessels | Fabrication and repair | Pick by the job |
The alloy decides the job and the length decides the seam: ER4043 covers general aluminum and cast alloys, ER5356 covers aluminum-magnesium alloys and marine work, and the 39 in rods suit long continuous seams while the 16 in rods suit bench work and repair.
How to read the chart
- Match the alloy to the base metal. ER4043 suits 3003, 3004, 5052, 6061 and 6063, plus cast alloys such as 214. ER5356 suits aluminum-magnesium, aluminum-magnesium-zinc and aluminum-silicon-magnesium alloys.
- Match the diameter to the rod on hand. All three rods here are 3/32 in diameter, so the diameter does not separate them; the alloy and the length do.
- Pick the length by the seam. The 16 in rods suit bench work and repair, while the 39 in MorningRo rods suit continuous seams in ship hulls.
- Check the shielding gas. The MorningRo and Ottoeight rods (on Amazon) list 100% argon, while the TOOLIOM rod (on Amazon) lists argon, helium or argon/helium mixtures.
FAQ for welders
What is the difference between ER4043 and ER5356?
ER4043 carries 5% silicon for a fluid weld pool and suits 3003, 3004, 5052, 6061 and 6063 plus cast alloys. ER5356 carries 4.5 to 5.5% magnesium for corrosion resistance and suits aluminum-magnesium alloys and saltwater work.
What size filler rod do I need for aluminum?
The three rods here are all 3/32 in diameter, in 16 in and 39 in lengths. Pick the alloy by the base metal first, then the length by the seam: 16 in rods for bench work and repair, 39 in rods for long continuous seams.
What shielding gas do I use for aluminum TIG?
100% argon, per the MorningRo and Ottoeight listings. The TOOLIOM ER4043 listing also allows helium or argon/helium mixtures as the shielding gas. See our best shielding gas for MIG welding guide for the gas side.
Can I use ER4043 on cast aluminum?
Yes, for the cast alloys the listings name: the TOOLIOM rod lists cast alloys such as 214, and the Ottoeight rod lists selected cast aluminum alloys. Check filler compatibility with your base metal before you weld, as the Ottoeight listing states.
How should I store aluminum filler rod?
Keep unused wire sealed and stored in a dry environment, as the MorningRo listing states. The TOOLIOM rods come packed in a plastic case, which keeps the 5 lb pack together on the shelf.
Related: best aluminum welding rods, best TIG rod for aluminum, TIG welding aluminum problems, and the welding consumables hub.




