Best Metal Saw Blade Tpi (2026): 5 Reciprocating Picks Compared
Five reciprocating saw blade packs for metal compared by TPI, blade length, pack count, cobalt content, coating and the metal thickness each maker states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBATHTOI 9 Inch 14/189.6/10View on Amazon - 2
Best for Nail Embedded WoodSouyou 9 Inch 14/189.6/10View on Amazon - 3
Best with CaseCylrod 6 Inch 14/189.6/10View on Amazon - 4
Best for Sheet MetalBATHTOI 6 Inch 189.5/10View on Amazon - 5
Best Small PackREEPLAR 6 Inch 14/189.5/10View on Amazon
The job on the bench is a cut in metal that a grinder would make a mess of: a pipe to shorten, angle iron to trim, sheet to open up, or a car body to take apart. A reciprocating saw does that work with a short stroke and a blade you can swap in seconds, and the teeth decide how the cut goes. This guide compares the best metal saw blade tpi picks by teeth per inch, blade length, pack count, cobalt content, coating and the metal thickness each maker states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall BATHTOI 9 Inch 14/18: 9 inch 14/18 TPI bi-metal blades with 8% cobalt in a 25 pack, stated for 1/16 to 5/16 inches. Check price on Amazon
- Best for Nail Embedded Wood Souyou 9 Inch 14/18: 9 inch 14/18 TPI blades stated at 0.042 inch thick for metal and nail embedded wood. Check price on Amazon
- Best with Case Cylrod 6 Inch 14/18: 6 inch 14/18 TPI M42 blades with 8% cobalt, universal compatibility and a transparent plastic case. Check price on Amazon
- Best for Sheet Metal BATHTOI 6 Inch 18: 6 inch single 18 TPI blades stated for sheet metal from 1.5 to 4 mm in a 25 pack. Check price on Amazon
- Best Small Pack REEPLAR 6 Inch 14/18: 6 inch 14/18 TPI blades in a 10 pack with a retractable storage box and 8% cobalt teeth. Check price on Amazon
The machines

25 Pack 9 Inch 14/18 Tpi Reciprocating Saw Blades
A 25 pack of 9 inch bi-metal reciprocating saw blades at 14/18 TPI with dual tooth design and 8% cobalt, stated for medium steel and metals from 1/16 to 5/16 inches.
Pros
- 9 inch length with 14/18 TPI dual tooth design
- Bi-metal steel with 8% cobalt and a non-stick coating stated by the maker
- Each blade stated as 0.04 inches thick
- 25 blades in the pack for auto dismantling and demolition work
Cons
- 9 inch length is longer than the 6 inch picks for tight cuts
- No warranty term is stated
- Weight stated as 1.5 pounds for the pack
- Metal range stated as 1/16 to 5/16 inches, not thinner sheet

25 Pack 9 in 14/18 TPI Bi-Metal Reciprocating Saw
A 25 pack of 9 inch bi-metal reciprocating saw blades at 14/18 TPI, stated at 0.042 inch thick, for steel and other metals from 1/16 to 5/16 inches and for wood with nails.
Pros
- 0.042 inch blade thickness stated by the maker
- 14/18 TPI in a 9 inch blade with a 25 pack count
- Maker states steel, other metals, wood, wood composites and nail embedded wood
- Non-stick coating and an organizer stated in the maker name
Cons
- 9 inch length is longer than the 6 inch picks for tight cuts
- Pack weight stated as 2.47 pounds, the heaviest here
- No warranty term is stated
- Metal range stated as 1/16 to 5/16 inches, not thinner sheet

25 Pack 6 in 14/18 TPI Reciprocating Saw Blades
A 25 pack of 6 inch reciprocating saw blades at 14/18 TPI in M42 steel with 8% cobalt, with universal compatibility and a transparent plastic case.
Pros
- 25 blades at 6 inch and 14/18 TPI
- M42 steel with 8% cobalt stated by the maker
- Universal compatibility with reciprocating saw tools
- Transparent plastic case and quick-release design stated by the maker
Cons
- Metal thickness range is Not stated
- Blade thickness is Not stated
- 6 inch length gives less reach than the 9 inch picks
- No warranty term is stated

25 Pack 6 Inch 18 Tpi Reciprocating Saw Blades
A 25 pack of 6 inch bi-metal reciprocating saw blades at 18 TPI with 8% cobalt, stated for sheet metal from 1.5 to 4 mm, thin metal pipe, nails and profiles.
Pros
- Single 18 TPI pitch stated for sheet metal cutting
- Sheet metal range stated as 1.5 to 4 mm
- 25 blades at 6 inch with each blade stated as 0.04 inches thick
- Bi-metal steel with 8% cobalt and a non-stick coating stated by the maker
Cons
- Single 18 TPI pitch, not the 14/18 dual tooth design
- 6 inch length gives less reach than the 9 inch picks
- Pack weight is Not stated
- No warranty term is stated

10 Pack 6 inch 14/18 TPI Bi-Metal Auto Dismantling
A 10 pack of 6 inch bi-metal reciprocating saw blades at 14/18 TPI with 8% cobalt in the teeth, stated for metals from 1/16 inch to 5/16 inch, with a storage box.
Pros
- 14/18 TPI interlocking teeth stated for fast straight cutting
- Bimetallic material with 8% cobalt added to the teeth stated by the maker
- Portable retractable plastic storage box stated by the maker
- 1/2-inch tool handles stated for Sawzall tools on the market
Cons
- 10 blades in the pack, fewer than the 25 pack picks
- 6 inch length gives less reach than the 9 inch picks
- Metal range stated as 1/16 inch to 5/16 inch, not thinner sheet
- No warranty term is stated
Spec sheet comparison
| Model | Gear Score | TPI | Length | Pack | Blade thickness | Metal thickness |
|---|---|---|---|---|---|---|
| BATHTOI 9 Inch 14/18 | 9.6/10 | 14/18 | 9 inch | 25 | 0.04 inches | 1/16 to 5/16 inches |
| Souyou 9 Inch 14/18 | 9.6/10 | 14/18 | 9 inch | 25 | 0.042 inch | 1/16 to 5/16 inches |
| Cylrod 6 Inch 14/18 | 9.6/10 | 14/18 | 6 inch | 25 | Not stated | Not stated |
| BATHTOI 6 Inch 18 | 9.5/10 | 18 | 6 inch | 25 | 0.04 inches | Sheet metal 1.5 to 4 mm |
| REEPLAR 6 Inch 14/18 | 9.5/10 | 14/18 | 6 inch | 10 | 0.04 inches | 1/16 inch to 5/16 inch |
Ratings in this table are the makers’ own claims taken from each product page (21 November 2026). None of these picks states a warranty term with a length, and none names a safety listing, so every pick here scores zero on those criteria; the ranking comes from performance, build and value.
Buying guide: choosing the best metal saw blade tpi
Teeth per inch and pitch
TPI is teeth per inch, and it sets how the teeth meet the metal on each stroke. Four picks here state a 14/18 TPI dual tooth design: the BATHTOI 9 inch, the Souyou 9 inch, the Cylrod 6 inch and the REEPLAR 6 inch. The BATHTOI 6 inch pack states a single 18 TPI pitch, and its maker aims it at sheet metal from 1.5 to 4 mm, thin metal pipe, nails and profiles. Match the pitch to the metal in front of you: the stated ranges in the cards tell you what each maker claims, in plain figures.
Length and pack count
Length decides reach and how much blade stays in the cut, and pack count decides how long the box lasts on demo work. The BATHTOI and Souyou picks state a 9 inch blade in a 25 pack. The Cylrod and BATHTOI sheet metal picks state a 6 inch blade in a 25 pack, and the REEPLAR states a 6 inch blade in a 10 pack with a portable retractable plastic storage box. The Cylrod maker also states a transparent plastic case. A longer blade helps on pipe and auto dismantling; a shorter blade fits tighter spots.
Cobalt and coating
Every pick here states cobalt in the blade or teeth. The BATHTOI picks and the Cylrod state 8% cobalt, the REEPLAR states 8% cobalt added to the teeth in bimetallic material, and the Souyou states bi-metal material with CRV heat treatment. Coatings differ by maker: the BATHTOI picks state a non-stick coating, the Souyou states a non-stick coating, and the REEPLAR states anti rust paint on the blade surface with a Perma-Shield coating in its name. Blade thickness is stated as 0.04 inches for the BATHTOI picks and the REEPLAR, and as 0.042 inch for the Souyou; the Cylrod blade thickness is Not stated.
Metal thickness and fit
Read the stated metal range before you buy, because that is the maker’s claim for the work. The BATHTOI 9 inch, the Souyou and the REEPLAR each state 1/16 to 5/16 inches for medium steel and metals. The BATHTOI 18 TPI pack states sheet metal from 1.5 to 4 mm and profiles with a diameter of 5 to 175 mm. The Cylrod metal thickness is Not stated. For fit, the REEPLAR states 1/2-inch tool handles for Sawzall tools on the market, the Cylrod states a shank for universal compatibility, and the BATHTOI and Souyou makers state compatibility with all brands of reciprocating saw tools.
Use as directed. Wear the protective equipment the makers state, keep hands clear of the blade path, and clamp the work so it cannot move in the cut. The REEPLAR maker states gloves and goggles and recommends lubricating oil or coolant to start the cutting work. The Souyou maker states safety goggles, coveralls, gloves, a dust mask and ear protection, with the material securely clamped to minimize vibration and movement.
Before You Strike an Arc
- Check the shank fit on arrival: the REEPLAR states 1/2-inch tool handles and the Cylrod states a shank for universal compatibility.
- Check the pack count and blade length against the card figures before the first cut, 25 pack or 10 pack, 9 inch or 6 inch.
- Clamp the material to the table to minimize vibration and movement, as the Souyou maker states.
- Wear gloves and goggles, as the REEPLAR maker states, and apply lubricating oil or coolant where that maker recommends it.
FAQ for welders
What TPI do these metal saw blades state?
Four picks state 14/18 TPI with a dual tooth design, and the BATHTOI sheet metal pack states a single 18 TPI pitch. The 14/18 picks state metal ranges such as 1/16 to 5/16 inches where the maker gives one, and the 18 TPI pack states sheet metal from 1.5 to 4 mm.
Can a metal saw blade cut wood?
The Souyou maker states use on steel and other metals and on wood, wood composites and nail embedded wood. The other makers here state metal work such as auto dismantling, pipe, angle steel and sheet metal, and wood use is Not stated for those picks.
Can you saw through metal with these blades?
Each maker states metal cutting within a stated range: 1/16 to 5/16 inches for the BATHTOI 9 inch, Souyou and REEPLAR picks, and sheet metal from 1.5 to 4 mm for the BATHTOI 18 TPI pack. The Cylrod metal thickness is Not stated.
What saw do I need to cut metal with these blades?
These are reciprocating saw blades. The REEPLAR states 1/2-inch tool handles for Sawzall tools on the market, the Cylrod states a shank for reciprocating saw tools from all major manufacturers, and the BATHTOI and Souyou makers state compatibility with all brands of reciprocating saw tools.
Scoring, line by line
Each blade pack is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| BATHTOI 9 Inch 14/18 | 9.6 | 29 | 21 | 22 | n/a | 0 |
| Souyou 9 Inch 14/18 | 9.6 | 28 | 21 | 21 | n/a | 0 |
| Cylrod 6 Inch 14/18 | 9.6 | 27 | 20 | 21 | n/a | 0 |
| BATHTOI 6 Inch 18 | 9.5 | 26 | 20 | 21 | n/a | 0 |
| REEPLAR 6 Inch 14/18 | 9.5 | 27 | 20 | 19 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.
More welding guides
See the metalworking machines hub, the best reciprocating saw blade for metal, the best reciprocating saw blade for pipe cutting, the hacksaw blade TPI chart and the bi-metal vs carbide reciprocating saw blade guide.




