Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Reciprocating Saw Blade for Metal (2026): 5 Picks Scored

Five reciprocating saw blades for metal compared by TPI, tooth material, length and pack size, from carbide to cobalt bi-metal.

Best Reciprocating Saw Blade for Metal (2026): 5 Picks Scored
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1EZARC Carbide 6 In 8TPIBest OverallEZARC Carbide 6 In 8TPI9.6/10View on Amazon
  2. 2TOLESA Bi-Metal 9 In 14TPIBest ValueTOLESA Bi-Metal 9 In 14TPI9.6/10View on Amazon
  3. 3EZARC M42 Cobalt 6 InBest CobaltEZARC M42 Cobalt 6 In9.6/10View on Amazon
  4. 4Diablo Dual Tooth 25-PackBest BulkDiablo Dual Tooth 25-Pack9.5/10View on Amazon
  5. 5DEWALT DW4898 10-Piece SetBest ComboDEWALT DW4898 10-Piece Set9.5/10View on Amazon

A reciprocating saw earns its keep where the cutoff wheel cannot reach: cutting pipe in place, notching tube, slicing through a rusted bolt or opening a panel. The blade does the work, and the wrong tooth count turns a quick cut into a smoking mess. This guide compares the best reciprocating saw blade for metal: five blades and sets scored on tooth design, stated cutting claims, length and pack size.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall EZARC Carbide 6 In 8TPI: Carbide teeth for stainless and cast iron, up to 50x longer life than bi-metal. Check price on Amazon
  • Best Value TOLESA Bi-Metal 9 In 14TPI: 8 percent cobalt edge, 9 inch 14TPI, 5-pack for sheet metal and pipe. Check price on Amazon
  • Best Cobalt EZARC M42 Cobalt 6 In: M42 cobalt teeth, 6 inch 14TPI, for 3 to 10 mm sheet metal. Check price on Amazon
  • Best Bulk Diablo Dual Tooth 25-Pack: 25-pack of 9 inch 14/18 TPI blades with Perma-Shield coating. Check price on Amazon
  • Best Combo DEWALT DW4898 10-Piece Set: 10-piece bi-metal set, 6 to 9 inch, with a tough case. Check price on Amazon

The machines

EZARC Carbide Reciprocating Saw Blades

EZARC Carbide Reciprocating Saw Blades

EZARC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 inch 8TPI carbide blade, 3-pack, for cast iron, alloy steel, stainless steel, rebar and car beams, with up to 50x longer life than bi-metal claimed.

Pros

  • Carbide teeth for stainless, cast iron and rebar
  • Up to 50x longer life than bi-metal claimed
  • 8 TPI for thick metal
  • 1/2 inch universal shank fits major saw brands

Cons

  • Only 3 blades in the pack
  • No warranty term is stated
  • No safety listing is stated
  • 6 inch length is short for deep cuts
TOLESA Bi-Metal Reciprocating Saw Blades

TOLESA Bi-Metal Reciprocating Saw Blades

TOLESA9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9 inch 14TPI bi-metal blade with an 8 percent cobalt edge, 5-pack, for sheet metal, pipe, profile and rebar.

Pros

  • 8 percent cobalt edge on bi-metal blades
  • 9 inch length reaches further
  • Rated for 0.1 to 0.3 inch sheet and pipes under 7 inches
  • 1/2 inch universal shank fits major saw brands

Cons

  • No warranty term is stated
  • No safety listing is stated
  • 5-pack is small for a busy shop
EZARC Bi-Metal Reciprocating Saw Blades

EZARC Bi-Metal Reciprocating Saw Blades

EZARC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 inch 14TPI bi-metal blade with M42 cobalt teeth, 5-pack, for 3 to 10 mm sheet metal and pipes under 100 mm.

Pros

  • M42 cobalt teeth for heavy metal cutting
  • Rated for 3 to 10 mm sheet metal
  • Rated for pipes under 100 mm
  • 1/2 inch shank fits all major saw brands

Cons

  • No warranty term is stated
  • No safety listing is stated
  • 6 inch length is short for deep cuts
Diablo Bi-Metal Reciprocating Blades - 9" Length

Diablo Bi-Metal Reciprocating Blades - 9" Length

Diablo9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9 inch 14/18 TPI dual tooth bi-metal blade, 25-pack with Perma-Shield coating, for auto dismantling and medium metal.

Pros

  • 25 blades, the largest pack here
  • Dual tooth design with Perma-Shield coating
  • 1 inch demolition body for straighter cuts
  • Made for auto dismantling and medium metal

Cons

  • No warranty term is stated
  • No safety listing is stated
DEWALT Reciprocating Saw Blades

DEWALT Reciprocating Saw Blades

DEWALT9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 piece bi-metal combination set, 6 to 9 inch blades, with a tough case that fits the power tool kit box.

Pros

  • 10 blades in 6 to 9 inch lengths
  • Tough case fits the power tool kit box
  • Bi-metal for flexibility and a long edge
  • Covers metal and wood

Cons

  • No TPI is stated in the listing
  • No cutting claims for hard metals
  • No warranty term is stated
  • No safety listing is stated

Other welders and gear to compare

Spec sheet comparison

Blade Gear Score Length TPI Teeth Pack Warranty
EZARC Carbide 6 In 8TPI 9.6/10 6 in 8 Carbide 3 Not stated
TOLESA Bi-Metal 9 In 14TPI 9.6/10 9 in 14 Bi-metal, 8% cobalt 5 Not stated
EZARC M42 Cobalt 6 In 9.6/10 6 in 14 Bi-metal, M42 cobalt 5 Not stated
Diablo Dual Tooth 25-Pack 9.5/10 9 in 14/18 Bi-metal 25 Not stated
DEWALT DW4898 10-Piece Set 9.5/10 6 to 9 in Varies Bi-metal 10 Not stated

Ratings in this table are the makers’ own claims taken from each product page (22 October 2026). Where a listing states a figure two ways, the table shows both.

Buying guide: best reciprocating saw blade for metal

TPI for metal

Teeth per inch decides the cut. The EZARC carbide runs 8 TPI for thick metal, while the TOLESA, the EZARC M42 and the Diablo run 14 TPI or 14/18 TPI for sheet, pipe and general metal work. Coarser teeth clear chips faster in thick stock; finer teeth give a smoother cut in thin sheet. Match the TPI to the metal thickness you cut most.

Carbide, cobalt or plain bi-metal

The EZARC carbide claims up to 50x longer life than bi-metal blades and names cast iron, alloy steel, stainless steel, rebar and car beams. The EZARC M42 lists M42 cobalt teeth for heavy metal cutting, and the TOLESA lists an 8 percent cobalt edge on its bi-metal blades. The Diablo and the DEWALT are standard bi-metal, which suits mild steel and demolition. Take the 50x figure as the maker’s claim, but carbide is the stronger stated tooth material here.

Length and shank

Blade length sets how deep you can cut. The TOLESA and the Diablo are 9 inch blades, the two EZARC blades are 6 inch, and the DEWALT set runs 6 to 9 inch. All five list a 1/2 inch universal shank that fits the major saw brands. A longer blade reaches further but flexes more, so use the shortest blade that clears the work.

Pack size and value

Blades are consumables, so the pack size matters. The Diablo ships 25 blades, the DEWALT ships 10 in a tough case, the TOLESA and the EZARC M42 ship 5 each, and the carbide EZARC ships 3. A big pack of standard blades suits a busy shop; a small pack of carbide blades suits stainless and cast iron jobs where each cut is expensive.

Use as directed. Clamp the work before cutting and let the blade do the work; forcing it bends teeth and stalls the saw. Wear eye protection and gloves, since hot chips fly, and keep the cord clear of the cut line. Blades get hot, so let them cool before handling. See the OSHA welding overview and our Safety Disclaimer page.

FAQ for welders

What TPI should I use for cutting metal?

For sheet metal and pipe, 14 TPI is the common pick here: the TOLESA, the EZARC M42 and the Diablo all run 14 or 14/18 TPI. For thick stock like rebar and beams, the EZARC carbide runs 8 TPI for faster chip clearance.

Can a bi-metal blade cut stainless steel?

Standard bi-metal blades are made for mild steel and demolition. The EZARC carbide explicitly lists stainless steel, cast iron and alloy steel among its targets, with up to 50x longer life than bi-metal claimed. For stainless, buy the carbide.

Do these blades fit my reciprocating saw?

All five list a 1/2 inch universal shank. The listings name DeWalt, Milwaukee, Makita, Skil, Ryobi, Porter Cable, Hitachi, Black and Decker and others as fitting. Check your saw takes a 1/2 inch shank before ordering.

How thick a metal can these blades cut?

The EZARC M42 is rated for 3 to 10 mm sheet metal and pipes under 100 mm. The TOLESA is rated for 0.1 to 0.3 inch sheet and pipes under 7 inches. The EZARC carbide is rated for 1/8 to 1/2 inch thickness in hard metals.

Is a 25-pack better value than a 3-pack?

It depends on the work. The Diablo 25-pack is standard bi-metal for general metal and demolition, while the 3-pack EZARC carbide is for stainless, cast iron and rebar. Buy bulk for mild steel, buy carbide for hard metals.

Related: reciprocating saw vs hacksaw for metal for the right tool, best cut off wheel for steel, and best angle grinder for cutting metal. Also see our metal fab tools hub.

Scoring, line by line

Each blade is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. None of the five states a safety listing or a warranty term, so the ranking comes from tooth design, stated cutting claims and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
EZARC Carbide 6 In 8TPI 9.6 30 21 21 n/a 0
TOLESA Bi-Metal 9 In 14TPI 9.6 28 21 21 n/a 0
EZARC M42 Cobalt 6 In 9.6 28 20 20 n/a 0
Diablo Dual Tooth 25-Pack 9.5 27 20 20 n/a 0
DEWALT DW4898 10-Piece Set 9.5 27 19 20 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides