Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Reciprocating Saw Blade for Pipe Cutting (2026)

Five reciprocating saw blades for pipe cutting, from a cobalt bi-metal 5-pack to a carbide 3-pack, ranked on what each listing states.

Best Reciprocating Saw Blade for Pipe Cutting (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1TOLESA T16141MBest OverallTOLESA T16141M9.7/10View on Amazon
  2. 2EZARC R978HMBest for Thick MetalEZARC R978HM9.6/10View on Amazon
  3. 3Caliastro 6MC18Best 8-PackCaliastro 6MC189.6/10View on Amazon
  4. 4LQOQA 12-PieceBest Mixed SetLQOQA 12-Piece9.5/10View on Amazon

Pipe is where a reciprocating saw earns its keep, but the wrong blade turns a quick cut into a smoked, wandering mess. The best reciprocating saw blade for pipe cutting in this guide is the TOLESA 5-pack, a bi-metal blade with an 8% cobalt edge made for pipe and profile, while the EZARC carbide 3-pack is the pick for thick and hard metals. Five blades and sets, ranked on what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall TOLESA T16141M: Bi-metal with an 8% cobalt edge, made for pipe under 4 in, with a thin 0.9 mm wall. Check price on Amazon
  • Best for Thick Metal EZARC R978HM: Carbide teeth for thick metal, with a maker-claimed 50x longer life than bi-metal. Check price on Amazon
  • Best 8-Pack Caliastro 6MC18: An 18 TPI 8-pack for black pipe, conduit and rebar, with a storage case. Check price on Amazon
  • Best Mixed Set LQOQA 12-Piece: Twelve wood and metal blades in 6, 8 and 9 in, with metal blades for pipe work. Check price on Amazon

The machines

Reciprocating Saw Blades

Reciprocating Saw Blades

TOLESA9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 in, 14 TPI bi-metal blade with an 8% cobalt edge, stated for sheet metal, pipe, profile and rebar, in a 5-pack.

Pros

  • 8% cobalt edge for wear resistance
  • Stated for pipe under 4 in diameter
  • 0.9 mm thin wall with set teeth
  • 5-pack with a universal 1/2 in shank

Cons

  • No warranty term is stated
  • No safety certification is stated
  • 6 in length only
  • Cobalt edge claim is the maker's wording
EZARC Carbide Reciprocating Saw Blades

EZARC Carbide Reciprocating Saw Blades

EZARC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9 in, 8 TPI carbide blade for thick metal, with a maker-claimed 50x longer life than bi-metal, in a 3-pack.

Pros

  • Carbide teeth for thick and hard metals
  • Stated for 1/8 to 1/2 in metal
  • Cuts cast iron, alloy steel and stainless
  • 1/2 in universal shank for major saw brands

Cons

  • 3-pack is the smallest count here
  • 50x life is the maker's claim, not a measured figure
  • No warranty term is stated
  • No safety certification is stated
6-Inch Thick Metal Cutting Reciprocating Saw

6-Inch Thick Metal Cutting Reciprocating Saw

Caliastro9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 in, 18 TPI bi-metal blade for metals up to a quarter inch thick, including black pipe and conduit, in an 8-pack with a storage case.

Pros

  • 18 TPI for thin metal and pipe
  • 8-pack with a storage case
  • 0.05 in blade thickness resists bending
  • States black pipe, conduit, rebar and angle iron

Cons

  • Up to a quarter inch thick; not for heavy stock
  • No warranty term is stated
  • No safety certification is stated
  • Bi-metal only, no carbide option
AMARTISAN 5-Piece 6 Inch 14TPI Heavy Metal Cutting

AMARTISAN 5-Piece 6 Inch 14TPI Heavy Metal Cutting

Amartisan9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 in, 14 TPI bi-metal blade for metal cutting, pipes and steel bars, in a 5-pack.

Pros

  • 14 TPI suits pipe and medium-thickness metal
  • 5-pack for steady work
  • Bi-metal for hardness and toughness
  • Universal fit for most reciprocating saws

Cons

  • Thin on stated specs: no capacity figures
  • No warranty term is stated
  • No safety certification is stated
  • Single length and TPI only
12-Piece Bi-Metal Reciprocating Saw Blade

12-Piece Bi-Metal Reciprocating Saw Blade

LQOQA9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12-piece mixed set of 6, 8 and 9 in blades for wood and metal, with 14 and 18 TPI metal blades for pipe work.

Pros

  • 12 blades in 6, 8 and 9 in lengths
  • 14 and 18 TPI metal blades for pipe and sheet
  • Storage box included
  • Universal interface for most saws

Cons

  • Half the set is wood blades, not for pipe
  • No warranty term is stated
  • No safety certification is stated
  • Service claims are marketing, not specs

Other welders and gear to compare

Spec sheet comparison

Blade Gear Score Length / TPI Tooth material Pipe use (stated) Pack Warranty
TOLESA T16141M 9.7/10 6 in / 14 TPI Bi-metal, 8% cobalt Sheet metal, pipe, profile, rebar 5 Not stated
EZARC R978HM 9.6/10 9 in / 8 TPI Carbide Cast iron, alloy and stainless steel, rebar 3 Not stated
Caliastro 6MC18 9.6/10 6 in / 18 TPI Bi-metal (HSS teeth, HCS body) Black pipe, conduit, rebar, angle iron 8 Not stated
Amartisan AM-9917 9.6/10 6 in / 14 TPI Bi-metal Metal cutting, pipes, steel bars 5 Not stated
LQOQA 12-Piece 9.5/10 6, 8, 9 in / mixed TPI Bi-metal Iron sheets and steel pipes 12 Not stated

Ratings in this table are the makers’ own claims taken from each product page (22 October 2026).

Buying guide: how to pick the best reciprocating saw blade for pipe cutting

Tooth count for pipe

Coarse teeth suit thick metal: the EZARC 8 TPI blade is stated for 1/8 in to 1/2 in metal. Mid teeth suit pipe and profile: TOLESA rates its 14 TPI blade for sheet metal 0.1 to 0.3 in and pipes under 4 in diameter, and the Amartisan 14 TPI suits medium-thickness materials. Fine teeth suit thin metal: the Caliastro 18 TPI cuts metals up to a quarter inch thick.

Carbide vs bi-metal

Only the EZARC uses carbide teeth, with a maker-claimed 50x longer life than bi-metal blades. The other four are bi-metal; the TOLESA adds an 8% cobalt edge for wear resistance. For occasional pipe cuts, bi-metal is enough; for stainless, hardened steel or daily demolition, carbide earns its keep.

Pack size

Pipe cutting eats blades. The Caliastro 8-pack and the LQOQA 12-piece keep spares on hand; the TOLESA and Amartisan 5-packs suit a steady diet of pipe; the EZARC 3-pack suits occasional heavy cuts. Match the pack to how much pipe you cut.

What the listings leave out

None of the five listings states a safety certification, and none states a warranty term, so every blade scores zero on both. Where a listing leans on marketing, like the 50x life claim on the EZARC, the score treats it as the maker’s claim. Every number here comes only from the listing of that exact product.

Use as directed. A reciprocating saw kicks on a bound blade: clamp the pipe, keep a firm two-handed grip on the saw, and let the shoe ride the work. Wear eye protection and gloves, keep the cord or battery clear of the cut, and let a hot blade cool before handling. See the OSHA welding overview.

Before You Strike an Arc

  • Match the TPI to the pipe wall: 8 TPI for thick stock like the EZARC’s 1/8 to 1/2 in range, 14 TPI for pipe like the TOLESA, 18 TPI for thin metal like the Caliastro.
  • Check the shank: the EZARC and TOLESA state a 1/2 in universal shank for major saw brands; the others state universal fit for most reciprocating saws.
  • Keep a spare handy: pipe cuts dull teeth fast, so the multi-packs here are the practical choice for a day of cutting.
  • For mixed wood and metal work, the LQOQA set pairs 6 TPI wood blades with 14 and 18 TPI metal blades in one box.

FAQ for welders

What TPI is best for cutting pipe?

Match the teeth to the wall. The listings here suggest 8 TPI for thick metal from 1/8 to 1/2 in, 14 TPI for pipe and profile, and 18 TPI for thin metal up to a quarter inch. Too coarse on thin pipe and the teeth catch; too fine on thick stock and the cut crawls.

Are carbide reciprocating saw blades worth it for pipe?

For hard and thick metals, yes. The EZARC carbide blade claims up to 50x longer life than bi-metal and is stated for cast iron, alloy steel, stainless steel and rebar. For plain steel pipe, a bi-metal blade like the TOLESA or Caliastro does the job.

Can I cut stainless steel pipe with these blades?

The EZARC listing states stainless steel among its uses. The TOLESA and Caliastro list steel pipe, rebar and similar metals; check the listing’s stated uses before cutting stainless.

How many blades do I need for a pipe project?

Blades dull with use, so packs matter. The sets here run from 3 to 12 pieces. For a single repair, a 3 or 5-pack is plenty; for a full day of cutting, the 8 or 12-piece sets keep you going.

Do these blades fit my reciprocating saw?

The EZARC and TOLESA state a 1/2 in universal shank fitting major saw brands, and the others state universal fit for most reciprocating saws. Check your saw’s shank style against the listing.

Related: best cutting fluid for metal, cutting fluid vs WD-40, best step drill bit for aluminum, and best hole saw for aluminum.

Scoring, line by line

Each blade is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No listing here states a safety certification or a warranty term, so every blade scores zero on those two criteria; the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
TOLESA T16141M 9.7 30 21 22 n/a 0
EZARC R978HM 9.6 32 21 20 n/a 0
Caliastro 6MC18 9.6 29 20 22 n/a 0
Amartisan AM-9917 9.6 29 20 21 n/a 0
LQOQA 12-Piece 9.5 27 19 21 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides